used Heating Elements for sale

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Order No. 6761 TECHNICAL DATA 6 hydraulic cylinders: - 4 upper - 2 side - max. length of glued elements 3100mm - max height of glued elements 1600mm - pump motor power 1.5kW - dimensions length / width / height 4320x1500x1120mm - weight kg ADVANTAGES - unpainted - possibility of gluing in vertical and horizontal position - used press - very good condition PRODUCT FEATURES The press is designed for assembly of all rectangular frame structures, e.g. doors, windows of various dimensions. An additional hydraulic cylinder is responsible for the possibility of gluing in the vertical and horizontal position. Net price: PLN 18 900 Net price: EUR 4021 Net price, calculated at the rate of 4.70 PLN / EUR (with greater fluctuations in the rate, the price may change)

AGILENT 240 Z with graphite YOM 2020 AGILENT 240 Z with graphite YOM 2022 Both have the following configuration: 1.240Z main machine 2. PSD 120TGA autosampler 3.120TGA graphite power 4. Computer and software 5. Chiller 6. Test elements lamps, graphite tube, sample cup.

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

These compressor elements from the compressed air brands like Atlas Copco, Kaeser, CompAir and Boge are refurbished here in our in-house workshop by our well-trained technicians. All refurbished air ends are sold with a comprehensive guarantee. Furthermore, aircoolers and oilcoolers for oil-injected screw compressors and aftercoolers and intercoolers and oilcoolers for oil-free air compressors for all well-known brands like Atlas Copco, Kaeser, CompAir, Boge and Ingersoll Rand.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.

Böllhoff Uniquick Vario automatic screw feeder UNIQUICK Feeder Type 360 Plastic sorting pot ∅ 360 mm Quiet and surface-friendly conveying Optimal spiral dimensioning depending on the material to be conveyed (width and height) Integrated and controlled chicane High wear resistance Uniform flow rate due to amplitude control In a soundproofed housing on a frame Web width: 20 mm Head Ø of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Tape Bunker Bunker trough, chute: stainless steel Strap: white with FDA approval Filling volume: 10 litres Max. filling weight : 35 kg Drive: AC gear motor 230V/50Hz Bunker with innovative drive to ensure metered, quiet and part-friendly feeding of screws and connecting elements. UNIQUICK Multi Modularly expandable 3-fold crossover Distributes the tested screws to three s ...

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Used fluidised bed dryer mady by Buhler model OTWG-280, new 1996. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Code: 0785 Brand: BUSELLATO Model: JET 6000 XL - CE Standard CNC Boring Milling Centre with 4 controlled axis for drilling, milling, contouring, cutting work on wooden elements, panels, Mdf, veneers, composite materials - CE Standard Machine structure composed of an electro-welded, standardised steel grid Technical data Working range mm 4600 x 1700 Useful passage mm 200 Useful X-axis stroke mm 5400 Useful Y-axis stroke mm 1833 Useful Z-axis stroke mm 400 X-axis speed 115 mt/min Y-axis speed 100 mt/min Z axis speed 30 mt/min N° 4 working ranges in X-axis with double 0 rows 8-position tool changer Composition: Boring head: X-axis vertical spindles 14 Y-axis vertical spindles 12 X-axis horizontal spindles 4 Y-axis horizontal spindles 8 Motor KW 2,2 - Rpm 3000/3500 Electrospindle Hp 9,5 - Rpm 24000 - ISO 30 coupling 1° Indexed circular saw unit X-Y - Ma ...

CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area  ...

Description registration number: WE 521SH, year of manufacture 2013, VIN number VF7YASMFA12410933, mileage 360427 km, engine capacity 2198 cm3, fuel type diesel, number of seats 3, bodywork damage, interior worn and dirty, driver's seat torn, missing cabin interior elements, brakes inoperative, battery missing or faulty Location 05-604 Falęcin, Falęcin 2 (Poland) Dates Inspection Tue, 22.04.2025 + Thu, 24.04.2025 09:00 a.m. - 03:00 p.m. Please schedule your visit by email.

Corning 048E88-611-31-29 MIC Unitized Tight-Buffered Cable, Plenum, 48fibres,OS2. The roll weighs just under 300kg. Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable type Tight-Buffered Product type Distribution Flame rating Plenum (OFNP) Fibre Category single-mode (OS2) Temperature Range Storage -40°C to 70°C (-40°F to 158°F) Installation and assembly 0 °C to 60 °C (32 °F to 140 °F) Operation 0°C to 70°C (32°F to 158°F) Cable Design Central Element Jacketed GRP Fibre Count 48 Number of Active Tubes 8 Subunit Colour yellow Subunit Diameter 4.40 mm (0.17 in) Tight buffer colour subunit Blue, orange, green, brown, grey, white Tensile Strength Elements and/or Armouring - Layer 1 Dielectric strength members Number of ripcords 9 Outer jacket material Flame-retardant Ou ...

Jetzone furnace Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: SND 1.5 x 202 Year: 2016 Productivity: 450 kg / h Dimensions: 8136 x 3581 x 4376 Heating medium: natural gas Description: A high-speed dryer consisting of two main elements: a fitting equipped with heating and distribution elements, and a production conveyor.

Order No. 6720 TECHNICAL DATA - diameter of the main saw 500mm - 35mm spindle diameter - max cutting height 70mm - max material width 210mm - min / max length of the material before cutting 500 / 4000mm - pneumatic blade slide - diameter of the extraction port 100mm, 140mm - overall dimensions: length / width / height 2700x1200x1650mm + control - 3kW engine - feeding table with pull rollers - 0.37kW engine - overall dimensions: length / width / height 5100x900x1000mm - sorter with 4 pneumatic ejectors - 0.75kW engine - overall dimensions length / width / height 5500x1000x1050mm - constant feed speed - total weight 2245 kg - Italian production - original DTR + CE documentation - used machine, very good condition PRODUCT FEATURES The Cursal TRV 2200E 500 optimizer is designed for cross cutting of material. Truncated elements can be grouped according to their le ...

Many elements of the engines are susceptible to being reconditioned when they begin to deteriorate. RS MOTOR has the capacity to recondition these elements and also a very large stock of them, this allows us to proceed with the repair at any stoppage at the plant, avoi-ding stops and high investments. The use of reconditioned elements can also be consideted in maintenance steps of some relevance. Some of the refurbished items that are normallu in sotcks are: CYLINDER HEADS COMPLETE ENGINES BLOCKS INTERCOOLER ACTUATORS PUMPS ...

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlif ...

We offer a Doka Framax wall formwork 201m² in original Doka rental warehouse quality. Special net price 46700,00€ + VAT New value approx. 146166€ Complete with accessories, also original Doka rental warehouse quality. Formwork completely cleaned, inspected and sorted. Formwork lining original Doka Xlife exposed concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Partially reassigned. 10 588103500 Framax Xlife element 2.40x2.70m 16 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 8 588122500 Framax Xlife-Uni-Element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 6 588106500 Framax Xlife element 0.45x2.70m 6 588108500 Framax Xlife element 0.30x2.70m 4 588130500 Framax Xlife inner corner 2.70m 4 588126000 Framax outer corner ...

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

We offer a Doka Framax 270 wall formwork complete with accessories 270.81m² The formwork is in original Doka rental warehouse quality, partly newly covered with original Doka Xlife formwork. Controlled and sorted. Suitable for higher-value applications. Accessories original Doka rental warehouse quality. Exposed concrete class 2/3 possible without any problems. New value approx. 203397,00€ Special net price 75421,00€ 12 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 10 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 4 588122500 Framax Xlife-Uni-Element 0.90x2.70m 8 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 8 588106500 Framax Xlife element 0.45x2.70m 8 588108500 Framax Xlife element 0.30x2.70m 8 588130500 Framax Xlife inner corner 2.70m 8 ...

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commi ...

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

ECKERT AGAT SPEED plasma-gas cutting machine was built in 2011 in Poland. The machine is used for precise cutting of pre-programmed elements in metal sheets with a maximum thickness of 45 mm (plasma cutting) or 100 mm (oxygen cutting). The main feature of the plasma cutting machine is its open structure, made of high-quality welded steel, allowing easy loading and unloading of the workpiece on the work table from either side. To increase the comfort of the machine operator, an extraction table has been installed to eliminate the contamination generated during the cutting process. The high speed of feeds, reaching up to 10000 mm/min, guarantees a significant reduction in machining time. The plasma cutting machine is also equipped with a modern ECS 872 CNC controller and a control panel, as well as a reliable KJELLBERG PA-S45 W plasma source ensuring the highest quality and precision ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

FINN POWER LPe6 laser turret punching machine FINN-POWER LPe6 laser punching machine The machine is equipped with a turret with twenty tool stations, including one Multitool MT24/8 and a laser cutting head. The machine has an LST unloading and loading device for a sheet with dimensions of max. 3000x1500 mm. And a UD scrap unloading device. Finn-Power LPe6 Laser Punching Machine Equipment: - Turret: 20 stations - Sheet metal loading system - Rofinn DC resonator with 2.5 kW power - Siemens Sinumerik 840D + Twincat CNC control with touch screen Finn-Power LP6 Punching Machine Technical Parameters: - Punching force: 300 kN ram driven by electric motor - Punching method: mechanical - Punching depth adjustment: digital - programmable - Ram speed adjustment: programmable - Number of stations in the turret: 20 pcs. - Tools: Thick Turret - Max. punch diameter: 89 mm CNC rota ...

Drying oven, curring oven chanel, chamber with fans Working temperature: 130 C° Max temperature: 200 C° 2 chamber Chamber 30 m3 Open size : 90x120 cm Heating capacity 110 kW 72 heating elements

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

Qty. 1 Second-hand shot blasting chamber unit Mfc.: Getrasur Blasteco Type: BLASTECO PC-BE 2466 Built: 2007 Stopped: 2022 with complete handling equipment Dimensions: 24.0 x 5.85 x 5.95 m – L x W x H Construction: Modular bolted – steel sheet elements. The frame structure consists of 7 internal frames and 2 edge frames. The edge frames form the gate porticos. Access: Main roller shutter gate (2 pcs.), motorized - electrically driven Gate clearance: 5.0 m x 5.01 m (width x height) Consist of: Control cabinet GETRAFLEX abrasive recovery floor Recirculation machinery Recovery and separation system Lighting (top, side) Automatic gate (x2) Service doors (x2) Cleaner (x2) Dust extraction ventilation

Graham Radiant Heat Shrink Sleeve Tunnel Tunnel Type: Radiant Electrical: 400 VAC, 3 Phase, 26 Amps Weight: 150kg Conveyor Height min/max: 900 mm/1000 mm Container Height min/max: 50 mm/300 mm Container Diameter min/max: 20 mm/150 mm -Individually controlled radiant heating elements -Polished interior surfaces to maximize heat/radiation reflection -Modular design -Double skin insulated stainless steel construction -Can preheat containers or shrink material after application -Designed to be used over an existing conveyor -Fully controlled internal environment to reduce running costs

HTST MALISON DESCO READ CAPACITY : 500 L HEATING : HEATING ELEMENTS PRODUCT PUMP WATER PUMP BALANCE TANK CONTROL PANEL SPARE PARTS : WE HAVE HEATING ELEMENTS/ PT100 SENSOR/ CHARTS/ ETC. CONDITION : GOOD

Hünnebeck Topec, 408m2 Modular slab formwork from Hünnebeck for faster work. The Hünnebeck Topec system consists of two basic elements – panels and columns. Perfect results in just a few steps Easy to use Sturdy yet lightweight aluminum construction TOPEC compensation solutions make it easier to bypass columns and other obstacles Versatile use Hünnebeck Topec, 408m2 Modular slab formwork from Hünnebeck for faster working. The Hünnebeck Topec system consists of two basic elements - panels and props. Perfect results in just a few working steps Easy handling Robust and lightweight aluminum construction TOPEC leveling solutions make it easier to get around columns and other obstacles Versatile use

The T300 tablet press is a rotary press that compresses solids and is equipped with 40 punch stations. The exact characteristics of the press machine vary according to the type of punch chosen. Technical data: Length mm 1280 Width mm 865 Height mm 1850 Net weight Kg 1920 Power A 12 Frequency Hz 50 Voltage Volt 380 Productions characteristics: Machine speed 260,000 tablets / h Max. tablets diameter 13 mm Filling depth 2 – 16 mm Min. production 12,000 tablets/h Max production 300,000 tablets/h Mould external diameter 24.01 mm Mould height 22,22 mm The T300 is a rotary tablet press equipped with two pairs of pressure rollers, one for pre-compression, the other for main compression. The operator side of the press is mainly in the front part of the machine where the four manual wheels, the control elements and the console are located. The press is fed from the top, ...

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Used Inject Star HS L750 vacuum tumbler is completely made of stainless steel. The vacuum tumblers are used in meat processing plants for marinating and massaging of muscles and red meat elements, poultry elements or seafood. This vacuum tumbler has two drive-out drums. The device has the ability to adjust the speed of the drum and the direction of rotation, run time and pause. Set dimensions: L:1800 x W:1300 x H1900mm Drum capacity: 750l Batch capacity: around 400 kg Power: 3.3kW Set weight: 760kg

IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

Code: 0265 Brand: ISVE Model: ESC JUNIOR/5 - CE Standard Vacuum dryer for wood with electric heating - CE Standard Capacity m/cubic 0,7 Electric heating Machine body in stainless steel N° 5 heating plates mm 480 x 5000 x 10 - 422W/each Wood pile size mm 5000 x 480 x 400 h Installed power: N° 1 oil vacuum pump with motor Kw 0,75 - Heating elements Kw 3,75 Door opening by means of N° 2 pneumatic cylinders Electric control panel Instruction manual Overall dimensions mm 5900 x 1000 x 1200 h Weight kg 1000

ITAL Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6.37 bar Test pressure – 8 bar Manufacturer – ITAL-RUBBER Insurance certificate –(last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1990 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

KARL MAYER RS-3-MSUS-V RS MSUS-V High-performance warp-knitting machine with course-oriented weft insertion for the production of heavyweight fabrics and composite fabrics GEO-TEXTILE FABRIC 540CM 6 gauge Year 2007 Serial number 96700 Running condition (Currently producing fabric for bullet proof jackets) Product features • Production of grid structures or closed fabrics • Combination with substrate fabric according to the product application • Strong knitting elements and yarn feeding guides for the processing of thick, high-performance yarn materials • Special feeding elements for the production of fabrics with fiberglass, carbon and other high-performance fibers possible Karl Mayer Warping beamer DS 21/30 Year 1997 Running condition and video is available

Qty. 1 Second-hand plate storage system Mfc.: Kasto Maschinenbau GmbH Type: UNITOWER B1.5 Built: 2018 Still in operation! Number of storage spaces: 86 Pallets size: Usable dimensions: 3000 x 1500 x 90 mm – L x W x H External dimensions: 3290 x 1616 x 160 (70) mm – L x W x H Payload per pallet: 1500 kg Use for surface elements made of wood, polycarbonate, etc. Only about 300 movements have taken place since 2018 - one movement takes about 2 minutes. The system is regularly serviced by the manufacturer. Speeds Hoist: 16.0 m/min. Pull and push device: 20.0 m/min. System dimensions approx.: 8855 x 5900 x 5730 mm – H x L x W

Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.

Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emerg ...

Koppens” contact cooker Type BG 6000/600 continuous teflon belt grill all stainless steel electrically heated 20 x 15 kw = 300 kW Heating elements Complete new control box (with 20 new heating elements) with lower and upper belt - bottom and top grilling temperature of the belts is separately adjustable nett length 4.800 mm belt width 600 mm adjustable speed product height electrically adjustable total length 8.500 mm total width 1.450 mm total height 2.250 mm (closed) 2 new belts Belt wash system

Product number: 2996 Type: VTC1100 Serial number: 266 Year of construction: 1991 Content: 1100 litres Connection size: DN32 Power: 3 x 380V, 50Hz, 2.4kW Dimensions: 1150 x 1200 x 3250 mm Weight: 280 kg With level indicator Oil tank with two heating elements.