used Hydraulic motors for sale

ABB MOTORS 3 ~ ENGINE M2AA 112 M CT. FIP: 55 3GAA 112001 - HAD 27,145 Number: 9680260510002 V Hz R/min KW A 440 60 1725 4.6 8.5

Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM

A 26.250 KVA ABB Generator GBA 1120 LD for sale. 135.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. 26,250 MVA ABB Generator GBA 1120 LD for sale. Brand: ABB Motors Type: GBA 1120 LD Number: 8266217 Voltage: 11,000 volts Power: 26,250 KVA Year of construction: 2000 RPM: 1500 rpm Weight: 43,400 kg

Qty.1 Second-hand cold rolling mill Mfc.: Achenbach, INNSE/MINO Type: 4-Hi Revamped: 2015 Strip width: 1500 mm Thickness Entry: 6.0 mm Exit: 0.3 mm Run-out table width: 1600 mm Rolling speed: 600 m/min. Motors Mfc.: Simemotori Fire Protection System Lubrication system

Less powerful version of SilentPro100-3. Instead of 1100W motors, Silent100-3 has three 550W motors which still makes it very powerful for an affordable price. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek Silent100-3: Three 550W direct drive electrical motors. Anti-rust coating. Air filter on each pump. Low noise and vibrations level. Oil-free. Easily portable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 3x550(1650) Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 56 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 66 Tracking: Available  ...

High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68  ...

Advantages of Aflatek SilentPro100-3: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions(length x width x height), mm: 1010x415x710 Weight, kg: 68 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro200-4: -Four 1100W direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 4x1100(4400) Motor speed, Rpm: 1440 Air supply, L/min: 960 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 83 Air tank, L: 200 Dimensions(length x width x height), mm: 1500x500x670 Weight, kg: 120 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1580x550x930 Weight, kg: 140 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free off ...

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro300-6: -Six 1100W direct drive electrical motors. -Very large 300l air tank. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 6x1100(6600) Motor speed, Rpm: 1440 Air supply, L/min: 1260 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 85 Air tank, L: 300 Dimensions(length x width x height), mm: 1650x450x850 Weight, kg: 173 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1720x490x920 Weight, kg: 205 Tracking: Available -Price is with VAT 21% included. Contact us if you ...

Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 2x1100(2200) Motor speed, Rpm: 1440 Air supply, L/min: 420 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 80 Air tank, L: 50 Dimensions(length x width x height), mm: 700x340x600 Weight, kg: 38 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 715x365x650 Weight, kg: 43 Tracking: ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

I sell a screw compressor with air dryer: AIRKRONE 25 SS + Dryer ES30. Powerful engine 18.5 KW / 25 HP 174 m3 / h / 2900 l/min Built in 1997. Approximately 20,000 moto hours. Made in Austria Everything works. Available equal, 2 pcs in stock. Possible also separately without air dryer cheaper to buy. Price by appointment.

Three separate oil coolers mounted in steel frame. Motors data: 380-420 / 660-720 V, 1460rpm, 11kW - 3 pcs

ALDURO Combination Belt Grinder BS-100+ Specifications: Motor voltage 400 volts Motor power 0.7 kW Sanding belt size 100x1000 mm Grinding wheel dimension DxWxID 200x25x20 mm Speed 2850 min- Sanding belt speed 15 m/sec. Dimensions WxDxH 550x310x580 mm Weight approx. 29 kg Connection suction Ø 36 mm Shaft extension Buffing disc Grinding wheel Abrasive belt

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.

Material: Steel Engine: 37 kW Weight: 1,700 kg diameters: 10-60 (mikron) task: kg/h 1200-5000 Speed: max. min 1 2250 This machine is overhauled and like new. You can also get the entire system with all components.

old, but very good Alpine A 250 B mill, drive: 5.5 Kw., mounted on frame, with motor circuit breaker, ready for use. old, but very nice Alpine A 250 B Mill, motor 5.5 Kw., frame mounted, ready for use

Format saw Altendorf Type: F 45 Year of Make: 1989 Sliding carriage length 2800 mm Saw blade swivel 45° With scoring Extraction hood above the saw blade including wide extraction hood for 45° cuts and narrow hood for 90° cuts Angle stop on the sliding carriage Motor power 5.5 kW Scoring motor 0.75 kW Cutting width to the right of the saw blade 1050 mm With table extension With table extension Saw blade diameter maximum with scorer 350 mm max. saw blade diameter 400 mm without scorer Cutting height at 90° maximum 130 mm Cutting height at 45° maximum 90 mm Saw shaft speed 3000/4000/5000/6000 rpm. Extraction connection via saw blade diameter 80 mm Suction connection bottom diameter 120 mm Length stop with magnifying glass with roller support Weight: approx. 1200 kg

With scoring machine G9rbd8z7f Slot 3100 mm right slot 1250 mm Carriage length 2800 mm Motor power 5.5 kW Power of the counter saw motor 0.75 kW Hydraulic turning of the saw, lifting You can call or write to us. We can speak and write German and Russian. You can also send messages in English 38.2.1

Sliding Table Saw Sizing Saw Make Altendorf Type: F 90 Machine No. 73-4-144 Year of construction: 1973 Sliding carriage length 3000 mm Motor power 5.5 kW Extraction hood from above With scoring machine Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge, without scoring 500 mm Maximum cutting height 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm 4 speeds adjustable via straps Suction connection diameter approx. 80 mm and 120 mm Saw blade not swivel Weight with pallet 815 kg Dimensions 3000 mm x 3000 mm x H 1500 mm ...

Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg

General: Travel X/Y/Z 800/800/600 mm Speed 18,000 rpm Tool holder HSK 63 Spindle: Motor spindle technology Speed 18,000 rpm Tool holder HSK 63 NC swivel rotary table: A-axis +/- 120° Technology Direct drive (2x torque motors) C-axis 360° Technology Direct drive (1x torque motor) Clamping surface 630 mm Table load max. 1,000 kg Tool magazine: Technology 2x chain magazine Tool Changer Pick-Up Number of stations 66 (2x 33) pieces Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool Measurement Tool Probes Workpiece Measurement Infrared Probes Emulsion Mist Separator Mechanical Setup operation Electronic handwheel

General: Control Heidenhain TNC 640 Travel X/Y/Z 650/650/500 mm Speed 12,000 rpm Fault circle swing bridge 800 mm Rotary function 800 rpm, 300 kg Spindle: Motor spindle technology Speed 12,000 rpm Tool holder HSK-T63 Spindle clamping rotation function NC swivel rotary table: A-axis +/- 120°, 0.001° resolution Drive tandem, 2x torque motors C-axis 360°, 0.001° resolution Drive 1x torque motor Clamping surface 470 mm Rotary function 800 rpm Table load max. 300 kg (500kg) Tool magazine: Technology Chain Magazine Tool Changer Pick-Up Number of stations 63 pieces Equipment/ Accessories: Rotary function 800 rpm Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool Measurement Tool Probes Workpiece Measurement Infrared Probes Emulsion Mist Separator Mechanical Setup operation Electronic han ...

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

Kahl Mixer Continuous Mixer Conditioner for Pellet Press Gr.3 used Manufacturer: Amandus Kahl Model: Gr.3 / Gr. III with drive motor ABB motors 380/660 V; 1470 rpm; 30 kW. For continuous conditioning, mixing of bulk materials with fissics as dosing for pellet presses . Use: - For continuous mixing of feed with liquids and steam - For melasses dry chips - In general process technology for moisturizing granular / powdery substances - General: for (all) mixing tasks in which liquids must be entered into solids Tech. Information Manufacturers - Total length approx. 2964 mm - Diameter approx. 550 mm - Total height approx. 900 mm - Distance inlet/outlet (center/middle) approx. 1950 mm - Inlet/output approx. 300x300 mm - Weight approx. 800 kg + motor approx. 245 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

SCREW COMPRESSOR GA 18 + 7.5P Serial Number: 272265 Hours: 197 Hours By integrating Atlas Copco's GA compressors directly into the production area, a reliable flow of compressed air directly to the job site is ensured. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. The GA compressors are designed to offer the highest efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally completely piped and wired compressor, single-stage oil-injected, compressing, air-cooled, soundproofed. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Specifications Manufacturer: Atlas Copco Type: GA 18+ 7.5P Screw compressor Max. operating pressure: 7.5 bar  ...

SCREW COMPRESSOR GA 18 + 7.5P Serial Number: 272262 Operating hours: Only 1 hour of operation By integrating Atlas Copco's GA compressors directly into the production area, a reliable flow of compressed air directly to the job site is ensured. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. The GA compressors are designed to offer the highest efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally completely piped and wired compressor, single-stage oil-injected, compressing, air-cooled, soundproofed. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Specifications Manufacturer: Atlas Copco Type: GA 18+ 7.5P Screw compressor Max. opera ...

SCREW COMPRESSOR GA 18 + 7.5P Serial Number: 272261 Hours: 1492 Hours By integrating Atlas Copco's GA compressors directly into the production area, a reliable flow of compressed air directly to the job site is ensured. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. The GA compressors are designed to offer the highest efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally completely piped and wired compressor, single-stage oil-injected, compressing, air-cooled, soundproofed. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Compressor control system Elektronikon II Specifications Manufacturer: Atlas Copco Type: GA 18+ 7.5P Screw compressor Max. operating pressure: 7.5 bar ...

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a  ...

AVIA AVIATURN 35 CNC turning center was built in 2022 in Poland. The machine, designed for precision machining of workpieces with a maximum diameter of 350 mm, has been equipped with many state-of-the-art solutions and high-quality components that ensure excellent turning results. The workspace includes, among others, a 12-position turret and a reliable spindle driven by a belt drive with encoder. The AVIAturn 35 CNC lathe is also distinguished by its richly ribbed, single-piece cast iron bed. The bed, which is inclined at 35°, effectively dampens all vibrations and oscillations, resulting in, among others, improved workpiece surface quality and increased cutting tool life. The machine’s extensive equipment includes, among others, a hydraulically movable tailstock, a tool probe and a SIEMENS CNC control in its most powerful version with a wide range of built-in fixed cycles and 16  ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)

AUTOMATIC COPY SHAPER machine type BALESTRINI CP 4 second hand machine Technical Details : machine composed by 4 units : 2+2 shaper units max. working useful length mm.2500 max. working width mm. 500 max. working heigth mm. 180 speed rotation shaper units 8500 rpm speed rotation sanding units 3500 rpm hydraulic pump motor power Hp 5,5 net weigth kgs. 3300 Volt. 380/50

ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO CN – CE RULES - max. horizontal tenon length 160 mm - max. vertical tenon length 100 mm - max. bench inclination 20° - inclination of workpiece support guides: 45° - production: 600/700 tenons per hour - spindle Ø 25 mm - benchs: dimensions 315x360 mm longitudinal axis inclination 0° ÷ -20° piece support guide adjustment 0° ÷ 45° - Numerical Control piece support guide adjustment 0° ÷ 45° axis movements 2 DC motors brushless” X axis stroke 600 mm Y axis stroke 200 mm X, Y axis speed 15 m/min. execution of programs in quick tasks program memory 1000 pcs. programming using macros - 9000 / 12000 rpm. - cutter motor power 4 hp - volts. 380/50 - year 2012 - CE Standards

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

SECOND-HAND DOUBLE SIDED ROUND END TENONER BALESTRINI MOD. PRO 15 CNC - CE RULES - Working length mm. 170 – 2000 mm - Max tenon length 80 mm - Production: 1800 tenons/hour (900-1350 pieces/hour) - Tool rotation 11,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - With loader RBF 2 -Volt. 380/50 - S/N AO.118.88 - Year 2002

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3-28..Price-$9,000

Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm