We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Base frame with adjustable base made of stainless steel Unwinding device for sleeve rollers with pull-off motor Sleeveformer and transport with servo motor and control Sleeve cutting device by means of rotating knives Sleeve lift device with sleeve holder Photocell control for product recognition Print Mark Recognition Complete Siemens control panel with control panel (touch panel) Pneumatic safety protection machine Sleeve Roll Monitoring Sleeve Roll End Monitoring Pneumatic connection 6 bar 1/2" E-connection 400 V, 50 Hz, 2 kW Maximum flow height for products 400mm Double sleeve roll unwinding with cutting and joining table Piece of sleeve storage (80 m) Product separation and product orientation Flail motor station for positioning the sleeve Needle system tor Sleeve Running sleeve holding station Platform with steps and railing for ergonomic operation of the sleeve ...
used
Wet Glue Labeling Machine Gernep Labetta Built in 1999 Round Runner Type 3/2/6 BR Chest, neck - back label Bottle Type 0.33 + 0.50 + 0.70 + 1.00L Glass Bottle 5,000 bph Running direction left - right Clockwise
used
For sale is a labeling machine from the manufacturer Gernep. The machine was completely overhauled in 2021 and was only rarely used afterwards. Currently, the machine does not have the unit for back labeling installed, but it would be available if required. Technical data: Manufacturer: Gernep Model: Labetta 4/3/8 Year: 2001 Capacity: 8,000 bph Bottle type: Euro bottle - Control: Siemens S7, machine is frequency controlled via a FU - Inlet/outlet: left/right Please inquire for further data.
used
For sale is a labeling machine from the manufacturer Gernep. The machine was completely overhauled in 2021 and was only rarely used afterwards. Currently, the machine does not have the unit for back labeling installed, but it would be available if required. Technical data: Manufacturer: Gernep Model: Labetta 4/3/8 Year: 2001 Capacity: 8,000 bph Bottle type: Euro bottle - Control: Siemens S7, machine is frequency controlled via a FU - Inlet/outlet: left/right Please inquire for further data.
used
Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainl ...
used
The GERNEP Rollfed 24-1056 2RA from 2013 is a reliable roll-fed labeller for PET and glass bottles with high production capacity. With 24 stations and 2 gluing units, it enables uninterrupted operation and precise labeling. Particularly suitable for the food and beverage industry.
used
Machine is in very good condition and swing-top bottles can also be driven 0.5l Bracket 0.5l Euro 0.33l Longleg
used
used
The system labels with two modules using the wet-glue process and can label with hot glue by means of a third additional module. Dimensions: approx. 3.80m x 3.00 m The labeller achieves an output of up to 15,000 bottles per hour. Condition: in operation, fully functional Machine dimensions (LxW): 3800 x 3000 mm Output: up to 15,000 bpm Viewing by arrangement
used
Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new
used
Reliable rotary labeling machine for wrap-around labeling with pre-cut labels and hot melt adhesive. Suitable for PET and glass bottles up to 1.5L. Equipped with a Nordson Problue 4 gluing system and Siemens PLC control., Bottle type: PET or glass bottles (0.5 l - 1.5 l), Electrical data: 400 V / 50 Hz / 3 phase / ~22 A
used
Reliable rotary labeling machine for wrap-around labeling with pre-cut labels and hot glue. Suitable for PET and glass bottles up to 1.5 L. Equipped with Nordson Problue 4 glue system and Siemens PLC control. Bottle type : PET or glass bottles (0.5L - 1.5L)
used
For sale is a Krones Ergomatic labeller in mint condition. The system can be used for large, small and small glass, as well as bottles. Top condition. Is given away inexpensively.
used
Availability: immediately Type: 90 Machine dimensions (LxWxH): 2.5 x 2.5 x 2.2 m Weight: 4000 kg Technical documentation: available Fully Automatic Labeling Machine Krones Prontomatic BR720-12-480-6-4-180 Type 90: Capacity: 16,000 bottles/h Bottle No. 1: 1.0 l VDF bottle Diameter: 89.5 mm Height: 306.5 mm Body label: 120 x 98 mm Adhesive height: 27 mm Chest label: 92.5 x 44 mm Adhesive height: 183 mm Back label: 75 x 90 mm Adhesive height: 27 mm Bottle No. 2: 0.7 l VDF bottle Diameter: 77.5 mm Height: 286.5 mm Body label: 120 x 98 mm Adhesive height: 30 mm Brood label: 82.5 x 44 mm Adhesive height: 172 mm Back label: 75 x 90 mm Adhesive height: 30 mm The machine was operated without technical problems until 04.2026. The dismantling was then carried out by specialist personnel - Prontomatic 720-12-480-6-4-180 - left-right - Steel glue roller - Neck ...
used
This machine is used in the beverage industry for accurate and reliable bottle labeling.
used
Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck ...
used
For sale is a used, well-preserved Krones Sleevematic labeller, which was in daily use until the very end. Specifications: - Year: 2004 - Sleeve formats: 0.2, 0.33, 0.5 - Power: 30,000 bph
used
KRONES Sleevematic (2008) is a high-performance sleeve labeling machine, developed for the precise application of full-body and tamper-evident labels. The machine is suitable for different container types and formats, providing reliable operation and consistently high labeling quality. Ideal for applications in the food and beverage industry where flexible sleeve labeling is required. Capacity : 40,000/h Shrink labeling : KronesSleevematic795-1432008
used
Krones Sleevematic – Multireel – Shrinkmat Sleeve Labeling System Complete shrink sleeve labeling solution combining three advanced Krones technologies into a fully integrated system for the decoration and labeling of PET and glass containers. The system ensures high precision, continuous operation, and maximum production efficiency in modern beverage bottling lines. General Information - Manufacturer: Krones - System Type: Shrink sleeve application and shrinking system - Maximum Capacity: up to 39,000 bottles per hour - Bottle Sizes: 250 ml – 1,500 ml - Container Types: PET and glass bottles Delivery Scope - The system includes the following equipment: - 1 × Krones Sleevematic TS - 1 × Krones Multireel S - 1 × Krones Shrinkmat System Components Krones Sleevematic TS - High-performance sleeve applicator designed for precise application of shrink sleeves on ...
used
Labelling machine with spare parts. The machinery and the parts are in very good condition. It consists of 4 labelling stations. 1 Station is used for cold glue labels 2 Stations are used for sticker labels 1 Station is used for tax label/Banderole The labelling speed is 20.000 bph.
used
20,000 bottles per hour Pros: •High labeling speed •Automatic feeding and precise positioning of the bottles •Modular design for different bottle sizes and shapes •Easy to maintain and cost-efficient in operation Machine Condition: •Used machine in good condition •Previously used in the beverage industry •Regularly serviced •with spare parts Labeling stations 2 × cold glue 3 × self-adhesive 1 × tax label
used
Manufacturer: Krones (modernised by Hormes) Type: Prontomatic Glass bottle labeling machine. Prepared for the processing of front and back labels (2 labeling stations), with 2 glue pumps (cold glue), maximum label length: 130 mm. Achievement. Up to 20,000 bph Good condition. Incl. format parts for different bottles 0.33 - 0.5 l
used
Running direction: left - right with safety cladding Capacity: 1,500 - 7,000 bph including glue pump Top condition
used
with 200 mm adhesive height Running direction: left - right Frequency-controlled
used
High-performance pallet labeling machine with double applicator head (Front-Right configuration). Suitable for industrial environments requiring reliable and precise thermal transfer printing. Up to 240 pallets/hour Touchscreen HMI 203/300 dpi resolution Max. 300 mm label width, Ø400 mm roll Electrical: 90-264VAC / 47-63Hz Excellent condition - fully tested.
used
Information about the machine Machine type: Sidel Rollquattro F15 Machine Number: 4129 Year of Make: 2011 Operating hours: 36,484 hours Capacity (nominal capacity): 26,000 bottles/hour Technical data The Sidel Rollquattro F15 is a high-performance labeller designed to handle different bottle sizes and shapes. It offers reliable and accurate roll-fed labeling with a nominal output of 26,000 bottles per hour. Key features Suitable for PET and glass bottles Precise roll-fed labeling High cost-effectiveness and operational reliability Spare parts A wide range of spare parts is available for the machine. Spare parts can also be offered separately on request. Available spare parts (examples): Control Components Labeling units Sensors and Drives A full list of available spare parts can be provided upon request. Condition of the machine The machine is i ...
used
- With one labelling station for applying self-adhesive labels - Year of construction: 2002 - Last service: June 2023 - Output: 1700 b/h - Formats: Ø 60/110mm - Direction of rotation: left-right - With variable speed drive - With photo cell at machine exit - With motorised conveyor - Without rotary infeed table - Without rectangular accumulation table - With batch number inkjet printer, SOJET - In good condition