used Notching Machines for sale

Offer 18348 Specifications - for notching gas, steam, stainless steel, non-ferrous, etc. pipes to be used in the - 90° angles to weld together. Also for double-corner joints. - Pipe notches for Ø 27.9 - 34.8 - 42.8 mm - Ø 49.0 - 61.0 mm - Zinc outlet notches Ø 27.0 - 61.0 mm - Max. tube wall thickness at 400N/mm² strength 5 mm - Drive 400 V / 2.2 kW - Mobile undercarriage - Space requirement approx. W 800 x H 1250 x D 650 mm - Weight approx. 120 kg

plate thickness: 3 mmpressure: ? ttotal power requirement: 3,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,3 x 0,9 x 1,1 mNo. 3549Notching machine BOSCHERT K 30 / 120 MINI No. 1Working area: Table 800 x 450Drive: 3,5Foot switchTable 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°)Space requirement approx. 1300 x 900 x 1100 mmWeight approx. 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25127 Specifications: - Cutting length up to 150 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 3 mm - Cutting angle infinitely adjustable 30° - 120 ° - Pneumatic clamping of the cutting angle adjustment - Stroke 22 mm - Stroke rate 60 1/min - Table support surface with T-slots and depth stops - Table height 900 mm - Drive 400 V / 3 kW - E - Footswitch - Space requirement approx. W 1000 x H 1150 x D 1400 mm - Weight approx. 850 kg

plate thickness: 4 mmcutting length: 225 mmblade length: 225 x 225 mmstroke: mmno. of strokes: Hub/mintable surface area: 910 x 620 mmtotal power requirement: 4,0 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x1,2 x 1,3 m90° notching machine big table adjustable stops footswitch Collection container for clippingsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mmcutting length: 225 mmtable width: 900 mmstroke: 22 mmtable length: 620 mmtable height: 900 mmtotal power requirement: 3 kWweight of the machine ca.: 660 kgdimensions of the machine ca.: 1250x900x1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°

Offer 25126 Hydr.- Universal - Two-Station – Sheet Metal Notching Machine Specifications: Station 1. - Cutting length up to 225 mm - Cutting thickness - steel with 400N/mm² strength 4 mm - Stainless steel with 600 N/mm² strength, 3 mm strength - Cutting angle 90 ° - Table support surface 1000 x 800 mm - Locking stops left + right 300 mm each - Table height approx. 900 mm Station 2. - Square clinker - cutting depth 100 mm - Cutting width 25 mm - Cutting thickness - steel 4 mm - Depth stops - Drive 400 V / 6 kva - Separate control panel with E-foot switch - Space requirement approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 750 kg

Max. sheet thickness: 4 mm steel, 3 mm stainless steel Adjustable angle between 30 and 120 degrees Knife length 150 mm Cutting width 20 mm Cutting depth: 100 mm Weight: 1,000 kg Instruction manual included

Max. cutting length: 250 mm Max. cutting thickness: 3 mm steel Knife in very good condition With attacks

plate thickness: 4 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 800 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60� ...

plate thickness: 6 mmblade length: 220 mmangle adjustable from - to: variabel table surface area: 1000 x 800 mmtotal power requirement: kWweight of the machine ca.: 0,9 tdimensions: 1,3 x 1,3 x 1,4 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions 4000 x 2220 mm Working area (x,y) 1250x1300 mm Punching force 300 kN Workpiece weight max. 200 kg Tool holder Trumpf (fast exchange system) rotating with Euromac control external digital control panel Tool holder trolley and light barrier Table dimensions longitudinal 4000 mm Table dimensions transverse 2220 mm Punching pressure 300 kN Total power requirement 7.5 kW Weight: 5 t Machine number: MDC 336 Machine is sold unchecked in its existing condition.

plate thickness: 2,0 mmtube diameter: 60,0 mmmotor: 400 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

good condition and electrified - inspection desired. Sheet thickness for stainless steel Niro 3, steel 4 mm Knife length 200 mm Stroke rate 60 stroke/min Oil capacity 60 l Angle adjustable from - to 30-135 degrees Total power requirement 4 kW Machine weight approx. 0.97 t Dimensions approx. 1 x 1.7 x 1.5 m Year of manufacture 1985 Sale without warranty

Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Footswitch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Max. sheet thickness: 4 mm steel, 3 mm stainless steel Knife length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg Knife sharpened Depth stop

Offer 24158 Specifications: - Cutting head hydr. actuated 90 ° - Knife length 220 mm - Cutting thickness - normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate 55 /min - Table size W 700 x D 600 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW -Central lubrication - E - Footswitch - Space requirement approx. W 1150 x H 1250 x D 900 mm - Weight approx. 700 kg

Technical information Exhibition Machine Brand INDUMASH Manufacturer's ref. NOTCHING MACHINE SAF 2 Model SAF 204 Table size 700 x 620 mm Weight 550 kg Gross weight 550 kg

Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at

Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Digital angle displays on the right and left Weight: approx. 1,200 kg

Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Knife sharpened Weight: approx. 1,200 kg

Max. sheet thickness: 4 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Hydraulic knife clamping and locking+ Cutting depth infinitely adjustable with digital display New set of upper and lower knives installed Weight: approx. 1,000 kg

Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69

plate thickness: 8 mmblade length: 250 mmangle adjustable from - to: fest table surface area: 840 x 750 mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,3 tdimensions: 1,4 x 1,1 x 1,5 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 790 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm: 4 tblade length: 156 mmangle adjustable from - to: fest Gradtable surface area: 450m x 305 mmtotal power requirement: Handbetrieb kWweight of the machine ca.: 95 KgDimensions (LxWxH): 530 x 380 x 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.