11 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
boring mills and machining centers / Pillar-Type Drilling Machines
23.06.2025
item-No.: 162731145

used


bore capacity in steel (diameter): 22 mmthroat: 270 mmspindle turning speed - stepless: U/minweight of the machine ca.: 1.1 tdimensions of the machine ca.: 1.2 x 1.2 x 2.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Pillar-Type Drilling Machines
23.06.2025
item-No.: 162708386
New in: 1965

used


: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Pillar-Type Drilling Machines
04.11.2026
item-No.: 162749611

used

Location: Land-de
Price: 1.250 €

Column Drill Alzmetall AB 3 / ESV Drive type: AZ continuously variable transmission with two-stage manual transmission Speed range (Gear Stage I): 80-240 rpm or 160-480 rpm Speed range (Gear Stage II): 240–700 rpm or 480–1,400 rpm Automatic feed: 3 stages (0.1 – 0.2 – 0.3 mm/rev) Motor power 1.5 KW - 380 Volt Tool holder: Short spindle MK 3 Spindle stroke (drilling stroke): 160 mm Projection: 285 mm Table clamping surface: 500 x 370 mm Column diameter: 130 mm Machine weight approx. 400 kg Drilling capacity in steel (St 60): 28 mm Drilling capacity in cast iron (GG 20): 35 mm Drilling capacity in steel (St 60): 40 mm Tapping in steel (St 60): Up to max. M 22 Threading in cast iron (GG 20): Up to max. M 33 Retrofitted foot switch and control cabinet Mechanical-hydraulic machine vice Röhm RB 4 (Jaw width 160 mm - clamping range up to 310 mm) Retrofitted f ...

boring mills and machining centers / Pillar-Type Drilling Machines
23.06.2025
item-No.: 162708266
New in: 1980

used


: ja feed: 80 - 800 m/min: 1848 weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Pillar-Type Drilling Machines
03.02.2025
item-No.: 162721218

used

Location: Land-de

Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition

boring mills and machining centers / Pillar-Type Drilling Machines
02.11.2026
approved
dealer
item-No.: 162755041

used

check
Location: Land-at
Price: 3.200 €

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

boring mills and machining centers / Pillar-Type Drilling Machines
23.06.2025
item-No.: 162708269
New in: 1980

used


voltage: 50 Vfrequency: 50 Hzampere: 3,7 A: 21882 speeds:: 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Pillar-Type Drilling Machines
28.09.2026
approved
dealer
item-No.: 162752834

used

check
Location: Land-de

1 gebr. Column drill, Flott SB 23 Technical data (Flott SB 23) • Drilling capacity: approx. 23 mm to 25 mm in steel (continuous drilling capacity approx. 23 mm) • Max. drilling depth / stroke: 140 mm • Projection: approx. 300 mm • Spindle holder: MK 2 (Morse taper 2) • Speed range: Variable depending on the version (often approx. 100 to 2,000 rpm via gearbox/V-belt) • Column diameter: approx. 82 mm to 125 mm (depending on the construction generation) • Work table: approx. 415 x 385 mm (with T-slots, height adjustable by hand crank) • Motor power: approx. 0.9 kW to 1.4 kW (pole-switchable) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 220 kg to 280 kg • Total height: approx. 1,950 mm

boring mills and machining centers / Pillar-Type Drilling Machines
05.10.2026
item-No.: 162753208

used

Location: Land-de

Column drills Optimum, Simatec and Ibarmia

boring mills and machining centers / Pillar-Type Drilling Machines
23.06.2025
item-No.: 162706728

used


bore capacity in steel (diameter): x mmbore capacity in steel (diameter): x mmthroat: x mmthroat: x mmbore stroke: x mmbore stroke: x mmPOLYHEDRAL DRILLING MACHINEDrilling range:-Square: Spanner opening 3-27mm-Hexagon: Spanner opening 3-32mmDrilling depth:-Square -14mm-Hexagon-13mmThroath150mmMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mills and machining centers / Pillar-Type Drilling Machines
23.06.2025
item-No.: 162705324

used


bore capacity in steel (diameter): 50 mmthroat: 355 mmbore stroke: 280 mmspindle taper: MK 5 spindle head adjustment: vertikal 280 mm motorischfeed: 0,11-1,73/9step mm/minturning speeds: 32-1400/12step U/mintable-size: 770 x 640 mmsurface area: 630 x 500 mmbase plate: 490 x 530 mmtotal power requirement: 8,1 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,25 x 0,8 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996