11 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 107-670)

RAS 1
sheet metal working / Round Bending Machines
12.11.2026
approved
dealer
item-No.: 162755545
New in: 2015

used

check
Location: Land-cz

Manufacturer: DAVI Model No.: MCA 2017 Year: 2015 Condition: Used Stock number: 9673 Operating hours: 190 h Working length rollers: 2000 mm Max. sheet thickness: 8 mm

sheet metal working / Round Bending Machines
28.07.2026
approved
dealer
item-No.: 162749347

used

check
Location: Land-de
Price: 8.200 €

Max. sheet thickness: 6 mm steel Upper roller diameter: 150 mm Motorized rear roll infeed Clockwise and counterclockwise rotation via footswitch Safety rope pull switch Conical rounds possible Weight: 1200 kg

sheet metal working / Round Bending Machines
28.07.2026
approved
dealer
item-No.: 162740972

used

check
Location: Land-de
Price: 15.400 €

Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Upper roller diameter: 200 mm Clockwise and counterclockwise rotation via footswitch Safety rope hoist Conical rounds possible Motorized rear roll infeed Lower roll feed via handwheel with position indicator Weight: approx. 4,500 kg

sheet metal working / Round Bending Machines
16.01.2025
item-No.: 162722458
New in: 1984

used

Location: Land-de

with rebate groove in the upper shaft, with steel wheel and scale, solid, stable construction, with wire inserts, 70 mm feed of the rear roller, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2040 mm Sheet thickness: 1.0 mm Colour: green Machine weight: 600 kg Dimensions: 2200 x 650 mm Diameter:. 70 mm Machine number: 8413105

sheet metal working / Round Bending Machines
23.06.2025
item-No.: 162705312
New in: 2001

used


Bending length: 4000 mmBending strength: 45 mmpre-bending: 38 mmpower capacity: 100 kWNumber of rollers: 4 StkAdjustable rollers: 3 Stkdiameter of upper rolls: 710 mmdiameter of lower rolls: 640 mmside roll diameter: 520 mmwork speed: 2+4 m/minweight of the machine ca.: 21 t- Adjustment type of rolls hydraulic- Working speed 2+4 m/min (up to 8m/min)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Round Bending Machines
19.08.2025
approved
dealer
item-No.: 162738690
New in: 2020

used

check
Location: Land-de
Price: 5.100 €

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

sheet metal working / Round Bending Machines
12.11.2026
approved
dealer
item-No.: 162739701
New in: 1998

used

check
Location: Land-cz

Inv. Num. : 8711 Type: MG 2000 x 25/20 Producer: Maqfort Created: 1998, GO 2016 Parameters: Working length rollers: 2000 mm Max. sheet thickness: 25 mm

sheet metal working / Round Bending Machines
12.11.2026
approved
dealer
item-No.: 162740860
New in: 1982

used

check
Location: Land-cz

Inv. Num. : 8806 Type: XZMP 3150/16 Producer: PIESOK Created: 1982 Parameters: Working length rollers: 3150 mm Max. sheet thickness: 16 mm Number of driven rollers: 3 pieces Weight: 40000 kg

sheet metal working / Round Bending Machines
21.08.2026
approved
dealer
item-No.: 162750923
New in: 1990

used

check
Location: Land-de

used RAS 3-roll round bending machine, with wire inserts, seam groove, transmission gear, Adjustment of the rear roller from the front with scale, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.25 mm Farbe/Colour grün Weight/Weight 150 kg Dimensions 1300 x 600 x 1100 mm Number of round rollers 3 pieces Roller diameter 56 mm Machine number: 316/10

sheet metal working / Round Bending Machines
12.11.2026
approved
dealer
item-No.: 162743654
New in: 1989

used

check
Location: Land-at

Schäfer SVRM 3500/12 - CNC 4-roll bending machine - Siemens CNC control with joystick for roller positioning and digital display (renewed in 2006) - Hydraulic tilting of the upper roller by control panel - Rollers made of quenched and tempered material with a strength of 900 N/mm² - Year of construction 1989 Technical data - Max. sheet width: 3500 mm - Bale length of rollers: 3550 mm - Max. sheet thickness bending: 12 mm - Max. sheet thickness bending 4xS/3xS: 8 / 6 mm - Max. insertion limit of the sheets at 20% work hardening: 380 N/mm² - Upper and lower roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest radius to be achieved: 220 mm - Feed speed lower roller: 200 mm/min - Feed speed side rollers: 700 mm/min - Total installed capacity: 22 kW - electr. Control: 380 V / 50 Hz / 3 Ph - Machine weight: 21100 kg

sheet metal working / Round Bending Machines
11.09.2026
approved
dealer
item-No.: 162743421
New in: 2000

used

check
Location: Land-de

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996