used Single filling stations for sale

FULL POWDER FILLING AND PACKAGING LINE COMPLETE WITH ALL CONVEYORING, GENERATORS AND 4 PALLETS WORTH OF SPARES. USED FOR POWDERED SUGAR AND FLOUR CONSISTING OF: CARTON ERECTING MACHINE TO POWDER FILLING MACHINE TO CHECK WEIGHER TO CARTON SEAL MACHINE TO LID APPLICATION MACHINE PLEASE CONTACT FOR MORE INFORMATION

Product number: 2615 Type: IRB1200-7/0.7 Serial number: 1200-500061 Year of construction: 2014 Capacity: max 7 kg Reach: 0.7 m Dimensions: 2350 x 2100 x 1800 mm IRC5 controller Including 4 way flow divider 2 pc. denester 1 pc. filling station 1 pc. outfeed slide and conveyor

ABG OMEGA 510 Converter  Manufacturer: ABG  Machine type: Omega 510 Converter  Type: Blanco labelling machine  Year of construction: 2010  Working width: 520 mm  Number of punching stations: 2  Equipment:  Unwinding - 76 mm  Splicing table  Side edge control  Grid take-off and matrix rewinder/grid rewinder  Label converter/label shifter for 110x75 mm format (not ABG)  Slitting station with 4 shear blades  2 separate rewinding axes  Tools: o Magnetic cylinder 134 Z or 16.75 o Magnetic cylinder 161 Z or 20.125

QT 660 | FILLING MONOBLOCK ACMA GD | MIGNON Year: 2004 Speed: 2.000 Bph Model: KARMA 16-3LP Direction: Clockwise Gravity filling Number of valves: 16 Capper: Screw caps Caps elevator included Bottle formats: 30 ml - VETRO - PET Safety protections

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

Air300W is multistage reciprocating compressor with up to 8 bar maximum pressure. It has three separate cylinders and powerful 7.5 kW belt drive motor. Excellent for construction sites, service stations and industrial manufacturing plants. Advantages of Aflatek Air300W: -Multistage, 3 cylinder air compression. -Easy to use. -Air filter on each pump. -Large air tank, longer operation time. -Mounted on 4 wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 1070 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank, L: 300 Dimensions(length x width x height), mm: 1410x500x1110 Weight, kg: 183 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1450x630x1200 Weight, kg: 200 Tracking: Available -Price is with VAT 21% included. Contact us if  ...

High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68  ...

SECOND HAND BUTTER PRODUCTION AND PACKAGING MACHINERY Year of manufacturing: 2008 Condition: Good used condition. - Continuous butter machine Make: AHLBORN 311/1000 Capacity: 1000 kh/hr Gear revised completely in 2018 - hardened gears Exit starts complete changed in 2020 Exit tube 250 gr Exit tube 25 blocks - Rotary forming and filling machine Make: Benhill 8538 Format: 250 gr Exit conveyor: 250 gr - 2 packers from 250 gr to 1000 gr - 4 packs - Mikrofix

Working length 1000 mm Max. working diameter 480 mm Spindle speeds 3.500 rpm Spindle bore 87 / 77 mm Number of tools 12 pcs No. of rotating stations 12 pcs Control FANUC OI - TD Main motor power 26 Kw

Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Program memory for 99 filling programs Electric power: 4 KW Machine dimensions in cm: Width: 60 Length: 110 Height: 160

We offer a used stainless steel tank from Alfa Laval, built in 1977, in good condition. Capacity 15,000 liters. Agitator with setting option slow/fast and pulse/pause. Spout with pneumatic valve. There is a spout, which was also used for filling. The tank is CIP capable, it has integrated spray balls. Previously used as a raw milk tank. We offer a used stainless steel tank from Alfa Laval, built in 1977, in good condition. Capacity 15,000 litres. Agitator with 'slow/fast' and 'pulse/pause' settings. Outlet with pneumatic valve. There is an outlet that was also used for filling. The tank is CIP-capable and has integrated spray balls. Previously used as a raw milk tank.

We offer a used stainless steel tank from Alfa Laval, built in 2009, in good condition. Capacity 3,000 liters. Tank lying. propeller agitator. Own cooling circuit via refrigerant. Own cleaning program (start manually). Previously used as a (flow) milk tank in front of a filling machine. We offer a used stainless steel tank from Alfa Laval, year of manufacture 2009, in good condition. Capacity 3,000 litres. Tank horizontal. Propeller agitator. Own cooling circuit via refrigerant. Own cleaning programme (manual start). Previously used as a (continuous flow) milk tank in front of a filling machine.

1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.

Filling monoblock ALFATEK 15.1 Year: 1993. Speed: 2.000 bph. Direction: Clockwise. Filler 15 valves – gravity filling. Single head corker – natural straight cork. Safety protections.

Filling monoblock ALFATEK 15.1 Year: 1990. Speed: 2.000 bph. Direction: Clockwise. Filler 15 valves – gravity filling. Single head corker – natural straight cork Safety protections.

QT 658 | FILLING MONOBLOCK ALFATEK 15.1 ISO Year: 2007 Speed: 2.800 bph for still wine 1.500 bph for champagne Direction: clockwise Filler 15 valves | Isobaric Filler Self-lveling Single head corker Natural straight cork Mushroom cork Safety protections Macchina revisionata

Filling monoblock ALFATEK | 16.20.4 Year: 2000 Speed: 3.500 bph Direction: Clockwise Rinser 16 clamps Filler 20 valves (oil) Capper 4 heads Safety protections.

Filling monoblock ALFATEK 24.4 Year: 2003 Speed: 4.000 bph Direction: Clockwise Filler 24 valves Corker 4 heads – Natural straight cork Safety protections

Filling machine ALFATEK 28 valves isobaric – 5.000 bph: Year: 2004 Producer: ALFATEK Speed (BPH): 5.000 bph Direction: Clockwise -RECONDITIONED MACHINE 1) Isobaric filler Alfatek 28 valves. 2) Complete of self levelling. Code T 10

Filling monoblock ALFATEK 3/9/1 - oil Year: 2010 Speed: 1.000 bph da 750cc Direction: Clockwise Station with 3 heads for gas injection and empty system Filler with 9 valves Pre-evacuation air before filling by pump and nitrogen Single head capper Aliminum screw cap Ø 31.5 x 24 H Safety protections.

bottling line – ALFATEK Year: 1994 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps Double treatment Filler 15 valves Gravity filling Single head corker Natural straight cork Safety protections

Bottling Line ALFATEK – 3.600 bph Year: 1996 – 2009 Speed: 3.600 bph Direction: Clockwsie Used rinser KOMPASS Year: 2009 Speed: 5.000 bph Direction: Clockwsie 20 clamps Fixed nozzle Single treatment Filling monoblock ALFATEK 24.4 Year: 2003 Speed: 4.000 bph Direction: Clockwsie Filler 24 valves Corker 4 heads – Natural straight cork Labeller NEWTEC 9T Year: 2015 Speed: 6.000 bph Direction: Clockwise Nr.2 cold glue stations Nr.1 adhesive station Box forming machine APE Year: 1996 Speed: 900 C/H Gluer NORDSON Case packer APE Year: 1996 Speed: 3.600 bph Box closing machine SIAT Year: 1996

Filling monoblock ALFATEK – Refermented beer Model: ELVIRA LP 12.6.15.1 Year: 2013 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps 6 heads for deaeration. Filler 15 valves – low pressure (0,1 – 0,2 BAR) Single head corker – Crown cap 26 mm and 29 mm (both equipment available) Available bottle formats: 0.33 lt cylindrical, 0.75 lt collio, 1.5 lt collio, 0.33 lt truncated cone Safety protections.

filling monoblock ALFATEK | TRIBLOC ELVIRA Year: 1999 Speed: 2.000 bph Direction: Clockwise Rinser 12 valves Filler 12 valves Single head corker | Natural straight cork Capper BERTOLASO | stelvin cap Safety protections

Bottling line ALFIERI | PET Year: 1996 – 2001 Speed: 8.000 bph Direction: Counterclockwise Filling monoblock ALFIERI 24.24.8 | 2001 Rinser 24 clamps Filler 24 valves Capper 8 heads AROL Labeller P.E. | 1996 8 heads Nr.1 HOT MELT station Saturator METALOCAIMA mod. RSP

Allfill SHA15 Auger filler Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

REF-0 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

Label Flexo Printing Machine Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 7, gearing 1/8”CP Between station 1 and 2, there is a turner bar equipped with web guide Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder 4 x 255 l/cm volume 4,5 cm³/m² 6 x 140 l/cm Lateral register: ± 5 mm Longitudinal adjustment: Unlimited at all printing and die cutting stations, choiceectable from mobile control console, smallest adjustment 0,05 mm. Web inspection : Tecscan web inspection system Drying: Optimized hot air drying Laminating station Station 8 is a laminating station that consists of a foil unwinding unit, where web guiding ensures the foil is directed straight to the adhesive station.  ...

Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide bef ...

AT Sack fillers Midget Linear weigher and filler Serial: 08MM-3-22 Semi automatic single head linear gross weighing and filling machine, weight range 20g - 6Kgs, up to 1000Kgs per hour, compact design, simple to set up, ideal for packing granules, flakes, pellets, beads and much more, 1Ph

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

1 bottle carton packing machine and carton palletizer matched to the bottling capacity of the upstream Krones bottling machine with 12,000 bottles per hour for 6 bottles in 1 carton Manufacturer: Autefa automation GmbH Friedberg Germany Masch. No. 500577 Type: PP-60 Year of construction: 2010 Bottle Carton wrapping machine and cardboard palletizer plant matched to the Krones bottle filling machine with 12.000 unit per hour. Packaging system: 6 bottles in 1 carton Manufacturer: Autefa automation GmbH Friedberg Germany Machine No. 500577 Type: PP-60 Year of construction: 2010

Filling monoblock AVE 12.12.1 | oil Year: 2000 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps Filler 12 valves Single head capper Screw cap Safety protections.

filling monoblock AVE – MILK PET Year: 2011 Speed: 7.000 bph Direction: Clockwise Rinser 20 clamps – grip on the neck Filler 20 valves Capper 5 heads – plastic cap Internal washing treatment Safety protections.

Labeller AVE 4T | adhesive • Year: 2000 • Speed: 2.000 bph • Direction: Clockwise • 4 heads • Nr.2 adhesive stations • Safety protections

bottling line AVE – wine • Speed: 3.200 bph • Direction: Clockwise • Depalletizer OMA – 2002 o Model: DEPALBLOCK • Filling monoblock AVE 16.16.4 - 2000 o Rinser 16 clamps o Filler 16 valves o Corker 4 heads – natural straight cork o Capper BERTOLASO STELVIN - 1985 • Dryer EUROPOOL - 2005 • Capsuling machine ROBINO&GALANDRINO – 2000 o Model: FENIX 2 • Labeller 8 teste KOSME – 2005 o 3 cold glue stations o 2 adhesive stations • Box forming machine APE MODULO F – 2002 • Case packer APE INCA 1200 – 1997 • Box closing machine SIAT XL 33 P C

bottling line AVE - 2005 speed: 2.500 bph for sparkling wine 3.000 bph for still wine. Depalletizer GP ENGINEERING mod. COMPACT 52 Filling monoblock isobaric AVE 24.24.6: Rinser 24 clamps single treatment - fixed nozzle Filler 24 valves with pre-evacuation and self-leveling Corker 6 head natural straight cork and mushroom cork. Caps orientator AVE Bottle washer/dryer CAMES mod. W DT 3/8 Capsuling machine ROBINO & GALANDRINO mod. FENIX 2 suitable for pvc and polylaminate capsules Labeller AVE adhesive and cold glue mod. 12T 4S 4E suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING mod. ISOLA 700: Box forming machine - american box Case packer single head with adjustable head Hives inserter AVE Box closing machine above and below hot glue AVE Palletizer GP ENGINEERING mod. PABR 50 Wrap pallets semiautomatic AVE Le ...

labeller AXTRA | 20T CO CE Year: 2010. Speed: 12.000 bph. Direction: Clockwise. Nr. 3 adhesive stations. Nr.1 cold glue station for i” and L” seal. Optical centering. Electronic cams. Safety protections.

Labeller AXTRA 8T – Optical Year: 2010. Speed: 8.000 bph. Direction: Clockwise. 8 heads. Optical centering (fiber) Electronic cam. Nr.3 adhesive stations. Nr.3 cold glue stations. Safety protections.

Labeller AXTRA 9T CE Year: 2019 Speed: 7.000 bph Direction: Clockwise 9 heads Elettrical cam Machine without stations Safety protections

Filling monoblock AXTRA isobaric Year: 2016. Speed: 300 bph sul 0.5 lt. Direction: Linear. Model: SA/L-G5/L-IV5/L-C1-CW/L-T1. 5 filling electro-pneumatic valves 5 rinsing nozzles Double pre-evacuation Corker – Crown cap 26 and 29mm. Adhesive labeller. Front and back label. Hot foil printer Capsuling machine PVC Safety protections.

-Continuous forms Collator Bama -Year 1990 -Six stations -Continuous delivery with speed controls -Crimp lock, Multiflex on both sides -Gears size 8”-11”-12”

Bottling line BARDI – 19LT PET Speed: 450 bph. PREFORMS tipper GENIUS – 2007. Blowing machine SIAPI (1 cavity) – 2007: Nr. 3 moulds: 10 LT – 15 LT – 18.9 LT. Filling monoblock BARDI – 2007. 3 bells for filters – PALL. Robot with interlayer and pallet magazine ACMI – 2010. Label marker and applicator for pallets VIDEOJET – 2016. Compressor 40 bar SIAD – 2007. Air tank 40 bar MTA – 2007. Dryer MTA – 2007. Chiller PIOVAN – 2007. Evaporation tower B.A.C. Bottle conveyor belts included. Various spare parts available.