used Table Drills for sale

spindle diameter: 110 mmx-travel: 900 mmy-travel: 900 mmz-travel: 900 mmspindle turning speed range: 8 - 1000 U/minspindle stroke: 600 mmFeed: 0,01 - 6 mm/Uradial face slide travel: 180 mmspindle taper: SK 50 table surface area: 1100 x 960 mmtable load: 2,5 ttable rotating: 4x 90 °total power requirement: 11 kWweight of the machine ca.: 11,5 t- Face plate with facing slide- CounterholderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 800 mmspindle: 60 mmtool adaptor: SK 40 spindle stroke: 500 mmdistance spindle /table: 56-500 mm0: 4 kWweight of the machine ca.: 4500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8023 Type: ECOCUT 1.3 Producer: Scharmann Created: 1981 Parameters: Control system: Siemens System 8 Y-axis travel: 1600 mm Travel Z axis: 1000 mm Travel W: 600 mm Spindle speed: 12-3000 1/min Spindle diameter: 125 mm Spindle power: 30/20 kW Cone: ISO 50 Equipment: Technical documentation

Inv. Num. : 8207 Type: W 160 H Producer: ŠKODA Created: 1979 Parameters: Control system: Mefi Work table length: 3150 mm Work table width: 2800 mm Maximum spindle speed: 1200 1/min X-axis travel: 3000 mm Y-axis travel: 2500 mm Travel distances Z-axis: 1400 mm W-axis travel: 1250 mm Spindle diameter: 160 mm Cone: ISO 50 Machine height: 7620 mm Machine length: 5900 mm Machine width: 12440 mm Machine weight: 68000 kg

Inv. Num. : 7577 Type: W 160 H Producer: ŠKODA Created: 1982 GO 2009 Parameters: Control system: Heidenhain iTNC 530 Work table length: 9000 mm Work table width: 4000 mm X-axis travel: 9000 mm Y-axis travel: 3500 mm Travel Z axis: 1500 mm Spindle diameter: 160 mm

Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm

Inv. Num. : 7699 Type: WEA 200 NC Producer: Škoda Created: 1983 Parameters: Control system: Sinumerik 840C Work table length: 3500 mm Work table width: 3500 mm Maximum weight of the workpiece: 60 t Dimensions of the Pinola: 520x520 mm Spindle diameter: 200 mm Cone: ISO 60 Availability September 2024

Inv. Num. : 7576 Type: WI 130 Producer: ŠKODA Created: 1969 GO 2008 Parameters: Control system: Heidenhain iTNC 530 Work table length: 2000 mm Work table width: 1800 mm X-axis travel: 1900 mm Y-axis travel: 1980 mm Travel travel Z-axis: 1250 mm

Inv. Num. : 8011 Type: H 100 A Producer: TOS Created: 1960 Parameters: Work table length: 1250 mm Work table width: 1120 mm X-axis travel: 1250 mm Y-axis travel: 1400 mm Travel travel Z-axis: 1250 mm Spindle diameter: 100 mm Taper: Morse 6 Power consumption: 7 kW Machine length: 6100 mm Machine width: 2850 mm

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Inv. Num. : 8012 Type: W 100 A Producer: TOS Created: 1991 Parameters: Work table length: 1250 mm Work table width: 1250 mm Maximum table load (uniform): 3000 kg Maximum spindle speed: 1120 1/min X-axis travel: 1600 mm Y-axis travel: 1120 mm Z-axis travel: 900 mm W-axis travel: 1250 mm Spindle diameter: 100 mm Power consumption: 15 kW Machine weight: 14000 kg

Inv. Num. : 8390 Type: WH 13 NC Producer: TOS Created: 1974, GO 1996 Parameters: Control system: Heidenhain TNC 355 Work table length: 1800 mm Work table width: 1800 mm Maximum spindle speed: 800 1/min X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel travel Z-axis: 1250 mm Travel distances W-axis: 800 mm Machine weight: 35000 kg Equipment: Head

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-axis: 1250 mmW-axis (spindle longitudinal): 800 mm: ISO 50 P.D.B : 1800x2500 mm: 12 t: 3000 Hertz: 400 total power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mATC 40 positionsSafety guardingCoolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 7834 Type: WHN 9 Producer: TOS Generated: Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg X-axis travel: 1250 mm Y-axis travel: 1120 mm Travel Z axis: 1000 mm Equipment: Spindle taper ISO 50

Inv. Num. : 8188 Type: WHQ 13 CNC Producer: TOS Created: 2013 Parameters: Control system: Heidenhain iTNC 530 Work table length: 2500 mm Work table width: 1800 mm Maximum weight of the workpiece: 12000 kg X-axis travel: 4000 mm Y-axis travel: 2500 mm Travel Z axis: 1600 mm Travel distances W-axis: 800 mm Spindle diameter: 130 mm Cone: ISO 50 Spindle speed: 5-3000 1/min Number of stacking positions: 40 Machine weight: 40000 kg

Year of manufacture: 2004/ overhauled: 2024 Rsspr3fiah Spindle diameter... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 10kW L x W x H ... 6015 x 3000 x 3000mm Machine weight ... 17500kg Machine after the partial overhaul by Fermat. Scope of work: Mechanical repairs to achieve excellent geometry and performance Reground table top New linear scales with cables New DRO screen New scrapers on all axles New cable carriers All new control labels New metal covers Additional external cooling system on the headstock New painting of the machine and accessories (standard grey-white combination) New workpiece lighting on the top of the headstock Options: Installation Tailstock The machine is in good condition, possible to test under p ...

spindle diameter: 80 mm: ja facing slide: ja : Ja weight of the machine ca.: 8,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 85 mmx-travel: 2000 mmy-travel: 1600 mmtotal power requirement: 40 kWweight of the machine ca.: 19,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal bench boring mill Wotan Rapid 1R/3, year of construction: 1978, control: Heidenhain TNC426, operating hours: since 1999 control conversion total 67,129 h, spindle 28,931 h, table dimensions: approx. 1000 x 1250 mm, table can be rotated 360 degrees, travel distances X/Y/Z: 1550/1279/995 mm, B-axis, W-axis: 602.6 mm, spindle diameter: 105 mm, tool holder: SK 50

Horizontal bench boring mill Wotan Rapid R1R-6.3, year of construction: 1986, modernization: 2002, control: Heidenhain TNC 426 M2002, operating hours: since 2002 control conversion total 45,144 h, spindle 16,703 h, table dimensions: approx. 1400 x 1120 mm, travels X/Y/Z: 1200/1000/600 mm, B-axis, W-axis: 1000 mm, spindle diameter: 120 mm, tool holder: SK 50, Note: The following work was carried out in 2022: Repair of the spindle box, Repair of the main motor, Renewal of the Siro double pump, renewal of the temperature controller on the oil cooler, total costs approx. € 93,000.00 net