used Thread Rolling Machines for sale

Thread rolling machine, Escofier H20Z, 2003, 2-roll, 20 ton, The machine is in our warehouse, under power

Thread rolling machine, Escofier H20Z, 2003, 2-roll, 20 ton, The machine is in our warehouse, under power

I am offering thread rolling machine Nissei model : FA-6U.The machines is in perfect working condition. Shaft size : 54 mm Rolling pressure : 6 tons Workpiece diameter min/max: 3/45 mm

I am offering thread rolling machine Nissei model : FA-6U.The machines is in perfect working condition. Shaft size : 54 mm Rolling pressure : 6 tons Workpiece diameter min/max: 3/45 mm

Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

ORT RP18B overhauled

Thread rolling machine ORT RP18B 2-roll Spindles diameter 69.95mm, Swivelling spindles, Overhaul + electronic retrofit with Siemens electronics, The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, In 2024 electronic overhaul and electronic retrofit with Siemens PLC The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

Thread rolling machine ORT RP30U, 2-roll, 30 ton, swiveling heads, variable speed drive, #1331 Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2

pressure: 10 - 150 kNmax. workpiece diameter: 2 - 50 mmtool diameter: 135 - 230 mmthread dia.: 2 - 50 mmWheel width: 160 mmroll diameter: 200 mmroll head turning speed range: 18 - 115 U/mintotal power requirement: 16 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

Laminating pressure: 70 Kn, Ø Pieces: 2mm min; 30mm max, Passed: 3mm max, Grooving step: 1.75mm max, Roller width: 50mm max, Ø roller: 73mm min; 110mm max, Speed of roller shafts: 90 rpm, Ø roller bearing shaft: 40mm standard, Wheelbase: 80mm min; 135mm max, Work career: 5 min max, Advance: from 0.5mm/s to 3mm/s, main engine: 3 Kw, Electrical power consumed: 3.18 Kw, Tank capacity: 80 L, Weight approx.: 670 Kg

Laminating pressure: 100 kN, Ø Pieces: 2mm min; 40mm max, Passed: 3.5mm max, Grooving step: 1.75mm max, Roller width: 70mm, Ø roller: 80mm min; 120mm max, Speed of roller shafts: 32 51 95 150 rpm, Ø roller bearing shaft: 40 standard, Wheelbase: 80mm min; 165mm max, Work career: 7 min, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 3 Kw, Electrical power consumed: 4.68 Kw, Tank capacity: 80 L, Weight approx.: 750 Kg

Laminating pressure: 160 kN, Ø Pieces: 3mm min; 50mm max, Passed: 5.5mm max, Grooving step: 2mm max, Roller width: 100mm max, Ø roller: 133mm min; 165mm max, Speed of roller shafts: 32 40 51 59 81 95 118 150 rpm, Ø roller bearing shaft: 54mm standard; 69.85mm special, Wheelbase: 135mm min; 205mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, Inclination of roller-carrying axes: +/- 5º, main engine: 5.5 Kw, Electrical power consumed: 7 Kw, Tank capacity: 130 L, Weight approx.: 1700 Kg

Laminating pressure: 220 kN, Ø Pieces: 3mm min; 70mm max, Passed: 6mm max, Grooving step: 2.25mm max, Roller width: 160mm max, Ø roller: 133mm min; 170mm max, Speed of roller shafts: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 135mm min; 230mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Tank capacity: 130 L, Weight approx.: 2100 Kg

Laminating pressure: 220 kN, Ø Pieces: 3mm min; 70mm max, Passed: 6mm max, Grooving step: 2.25mm max, Roller width: 160mm max, Ø roller: 133mm min; 170mm max, Speed of roller shafts: 24 30 38 45 62 72 90 114 rpm, Ø roller bearing shaft: 54mm standard; 69.85 special, Wheelbase: 135mm min; 230mm max, Work career: 15min max, Advance: from 0.5mm/s to 6mm/s, Laminating time: from 0.1s to 100s, Break time: from 0.1s to 100s, main engine: 5.5 Kw, Electrical power consumed: 8.6 Kw, Tank capacity: 130 L, Weight approx.: 2100 Kg

I am offering electrical panel for thread rolling machine WMW UPW 12.5/25 Components trade mark : Schneider electric Full documentation of the electrical schematics.

Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed

I am offering Thread rolling machine WMW UPW 12,5.1 after full overhaul. Machine has new hydraulic pump. All electrical motors were recycled. New electrical system was installed on machine. The chain and oil in the variator were changed. The condition of machine is absolutely perfect. Technical data: - Minimum / maximum diameter of the rolled detail: 3/100 mm; - Maximum rolled thread pitch: 4 mm; - Maximum rolled pitch with notched teeth: 1.6 mm; - Maximum rolled length of the thread made by the plunge method: 125 mm; - Maximum rolled length of the thread made longitudinally: 2000 mm; - Minimum / maximum distance of rolling spindles, including stroke: 130/240 mm; - Height of rolling spindles above the machine bed: 160 mm; - Maximum diameter of rolling tools: 195 mm; - Diameter of rolling spindles: 63 mm; - Rolling force infinitely adjustable: from 0 to 12500 kg; - Rolling sp ...

Inv. Num. : 7595 Type: UPW 12.5x70 Producer: WMW Created: 1964 Parameters: Power consumption: 5 kW Max. thread diameter: 70 mm Maximum power: 12.5 t Machine weight: 1900 kg

I am offering Thread rolling machine WMW UPW 25 x 100 after full overhaul. New electrical system with Schneider electric components was installed(full documentation and schematics). Machine has a new hydraulic pump, valves and distributor. All electrical motors were electrical checked and all bearings were changed. All bearings of the clutch were changed. Bj77Rbchcjg The chain and oil in the variator were changed. The condition of the machine is absolutely perfect. Model: UPW 25.1 Pressure:25 t Workpiece diameter min/max:10/100 mm

MAX CAPASITY 63 T, DIAMETER ROLLING 110

MAX CAPASITY 25 TONS

ROLL DIAMETER 70

Thread rolling machine ORT / WMW UPWS 31.5, 2-roll, 31.5 ton, swiveling heads, Under power in our warehouse in Gussago BS. Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior, Power (Ton): 30, Number of rollers: 2