used Turning Spindle Units for sale

Code 0782 Description Centerlathe Make A.I. Hembrug Model DR - 133 Serial No. DR 133 / F 4018 Year 1970 Distance between centers 750 mm Swing over bed 270 mm Swing over gap xxx mm Swing over crossslide 150 mm Spindle bore 35 mm Number of spindle speeds 28 Spindle speeds 18 – 3550 rpm Feeds Longitude and cross Motor power 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck 2 x RSF DRO Condition Machine is in normal condition.

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

ABG Omega SR 410 from 2010 with 2 flexo printing units 2 diecutters with one GapMaster from Kocher & Beck Manufacturer: AB Graphics Type: SR 410 Year of production: 2010 Flexo printing units: 2 units Rotary die cutting untis: 2 GapMaster: Yes one of the die cutters is Gapmaster Turning bar: Yes Nip rollers: Yes UV System: GEW Please contact us for more information or pricing. Machine is available immediately

SOLD New ABB AMG 1120MM08 DSE Alternator For Sale Suitable For Wartsila 20V34SG generators From 8.7 MW Wartsila 20V34SG generator 2 Units available new unused from surplus gen sets. Voltage: 10500 kV Output: 10913 KVA

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

ABG DIGICON II - CONVERTING Year of Manufacture: 2009 ________________________________________ Product Description: Year of Manufacture: 2009 Location: Labelpresshop/Germany Availability: Immediately available Condition: Very good working condition, regularly maintained ________________________________________ Machine Specifications and Equipment: • Web width: 330 mm • Control panel: Movable central control panel • Unwinder: With web edge guide system • Corona Treatment System for surface preparation • Round-to-round Heat Sealing Unit • Flexo Printing Unit: Full / semi-rotary • Cold Foil & Lamination Unit • Drying System: UV and hot air drying • Central Dancer Roller for web tension control • Die-Cutting Unit: Full / semi-rotary with heating oven and Beck Gapmaster • Waste Removal System: De-weeding with rewinder • Slitting Knives: 2 bottom  ...

Das Zentren nicht benutzt (Die Pandemie Änderte die Pläne). Das Zentren wurde im Jahr 2020 nach Deutschland gebracht. Accuway Misteiner der besten Hersteller in Taiwan. der Maschinen in die ganze welt liefert Controller Fanuk 0i Spindle speed 10000 rpm Spindle nose taper BT40 Bearing inner diameter 70mm drive system Belt (Direct) X-axis travel 850mm Y-axis travel 550 mm Z -axis travel 150-700 mm Table dimension 1100x600 mm T-slot 5x18x100 Max. weight on table 1000 kg FEED RATES X-axis travel 30 m/min Y-axis travel 30 m/min Z -axis travel 30 m/min Cutting feed rate 12 m/min AUTOMATIC TOOL CHANGE SYSTEM tool magazine capacity 24 pcs Max tool weight  ...

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 2 - 22 mmMax. drill depth: 120 mmTable length: 500 mmTable width: 400 mmSpindle speeds:steplessfrom: 50 rpmup to: 4000 rpmPower: 1.5 HPMachine´s weight about: 150 kgOverall dimensions machine:Length: 400 mmWidth: 500 mmHeight: 1000 mm

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 13 mmTable length: 400 mmTable width: 350 mmDepth of throat: 200 mmSpindle stroke: 120 mmSpindle speeds:number (steps): 10 from: 350 rpmup to: 5000 rpmmin.: 30 mmmax: 330 mmVoltage 50 Hz 3x: 380 VoltPower: 1.00 HPMachine´s weight about: 260 kgOverall dimensions machine:Length: 800 mmWidth: 550 mmHeight: 600 mm

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 6 mmTable length: 310 mmTable width: 280 mmDepth of throat: 150 mmSpindle stroke: 50 mmSpindle speeds:number (steps): 8 from: 650 rpmup to: 12000 rpmVoltage 50 Hz 3x: 380 VoltPower: 0.30 HPMachine´s weight about: 50 kgOverall dimensions machine:Length: 600 mmWidth: 350 mmHeight: 650 mmVarious accessories:Drill chuck: 0 - 6.5 mmLamp

Drilling capacity: 0 mmNumber of drilling units: 0  Spindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataNumber of drill-heads: 3 Drill capacity: 6 mmDrill depth (spindle stroke): 50 mmTable length: 820 mmTable width: 180 mmTaper in spindleDepth of throat: 150 mmSpindle speeds:number (steps): 6 from: 325 rpmup to: 6000 rpmVoltage 50 Hz 3x: 380 VoltMachine´s weight about: 100 kgVarious accessories:Threading attachment: 3 Coolant systemDrill chuck: 3

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Control: GE MARK CENTURY ONE PLUSTechnical datanumber of toolsDrill capacity in steel: 23 mmSpindle speeds :steps: 9 from: 42 rpmup to: 3500 rpmTable length: 820 mmTable width: 400 mmLongitudinal travel: 400 mmTransversal travel: 320 mmVertical travel: 470 mmFeeds: 1000 mm/minRapid traverse:: 3.5 m/minVoltage 50 Hz 3x: 380 VoltPower: 2.5 kW

Table length: 600 mmTable width: 190 mmLongitudinal X: 300 mmCross Y: 135 mmVertical Z: 300 mm Technical dataTable length: 600 mmTable width: 190 mmLongitudinal travel (X-axis): 300 mmTransversal travel (y axis): 135 mmVertical travel (z axis): 300 mmSpindle speeds:number (steps): 8 from: 100 rpmup to: 1500 rpmTaper in spindle:: 20 WVoltage 50 Hz 3x: 380 VoltMotor output: 2.0 HPMachine´s weight about: 600 kgVarious accessories:Vertical milling head

Technical dataLongitudinal travel (X-axis): 100 mmTransversal travel (y axis): 75 mmVertical travel (z axis): 150 mmSpindle speeds:number (steps): 6 from: 125 rpmup to: 4000 rpmTaper in spindle:: 12 WVoltage 50 Hz 3x: 380 VoltMotor output: 0.3 HPMachine´s weight about: 120 kgOverall dimensions machine:Length: 700 mmWidth: 600 mmHeight: 1400 mmVarious accessories:Dividing attachmentVice: width: 60 mmSteadySet of collets

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Continuous cnc with drilling unit and also electrospindle for milling work Working Dimensions X:Unlimited / Y: 950mm / Z: 70 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1 Saw Blade) Working Speeds X: 70m/min / Y: 70m/min - Z: 20m/min 5,5 Kw I 7.50 HP ER32 Manual HSD Spindle Motor Double Sided Air Flotation Working Table Piece Verification System with Laser Weight (Approx.) 1.500 kg

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY

Universal Milling Machine AGURSAL JARBE type F50 Travel X: 1500 mm Travel Y: 750 mm Travel Z: 500 mm Cone: SA 40 Rotation: from 31 to 1400 RPM Table size2000 x 600 mm Year of construction: 1991 Universal Head type HURON Scale 3 axes HEIDENHAIN Centralized lubrication Lubricant pump Variable speed drive for feeds X / Y / Z Voltage: 380 V Spindle motor power: 17 CV Width with ends table 3300 mm Width without ends table: 2000 mm Depth: 2500 mm Total height: 2200 mm Weight: 6 T

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

AKW Engineering Ltd Compact Spiral Freezers Currently building 4 bespoke compact freezers, using reconditioned top quality stainless steel framework. All belts are 510mm wide. Units are constructed on a hot dipped galvanised sub-frame, for easy transportation and relocation. All with new insulated enclosures and doors. Wiring and all serviceable components are new. All with built in belt wash spray bars. Choices of freezing capacities, evaporators and refrigerants.

Working length 1000 mm Max. working diameter 480 mm Spindle speeds 3.500 rpm Spindle bore 87 / 77 mm Number of tools 12 pcs No. of rotating stations 12 pcs Control FANUC OI - TD Main motor power 26 Kw

Stock number: 3988 CNC CAROUSEL LATHE Manufacturer: ALEX TECH VIPER, Type: VTL 20/24 M Machines NO.: 7640901011, Year of manufacture: 2008 Specifications: Face plate diameter 2000 mm Large turning diameter 2400 mm Face plate speeds ( ) 1-73 / 1-200 2 step rpm Large workpiece height 1500 mm Gr. face plate load 20000 kg X- Movement 1800 mm Y- Movement ( Cross Beam ) 800 mm - 5 Sep each 200 mm Z- Movement 1000 mm C-Axis 0.001 degree Ram size 230 x 230 Power 11/15 Driven tool revolutions 30-2000 rpm Tool Changer 18 (9 Turning 9 Milling ) ISO 50 Stations Main motor 45 Voltage 400 volts Einständer. CNC Control: Fanuc Oi-TD Spindle Hours 10453 Accessories: Chip conveyance. New 2025 Cooling water system. Various accessories. Cooling in the Sp ...

FOR SALE 4 UNITS ALFA LAVAL S 826 separator YOB 2005 V 380 Hz 50 TO WHOM IT MAY CONCERN; WE VE COMPLETE 4 SETS ALFA LAVAL S 826 SEPARATOR AT OUR STOCK . WE VE ALSO CONTROL PANEL ELECTRIC BOXES ETC... SEPARATOR BOWLS HAS NO ANY DEMAGES. SEPARATORS ARE IN GOOD WORKING CONDATION. SEPARATOR USED AS OIL SAPARATORS AT PAST TENSE. PLS FIND SPECIFICATION ON BELOW. SEPARATORS ARE READY TO TRANSPORT . MAKER ALFA LAVAL TYPE S826 SERIAL OF NO. S 4135619 / 4135620 / 4135621 / 4135622 YEAR OF BUILT 2005 PRODUCT NO. 881201-06-01 VOLT 380V FREQUIENCY 50 Hz MAX SPEED BOWL 12129 r/min MOTOR POWER 5.5kW MADE IN SPAIN IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH U ...

Make: Alfa LavalModel: BRPX 413 XGD-14C SeparatorDOM: 1985Condition: Used, Reported in Good ConditionApplication: For Food Purposes (Animal Fats/Lard)Hydraulic Capacity: 18,000 Liters/HourCapacity: Fish Presswater: 12,000-18,000 Liters/Hour (2650-3960[tel:2650-3960] Gallons/Hour)Purification of Fish Oil: 7,000-8,000 Liters/Hour (1600-1760 Gallons/Hour)Purification of Animal Fat: 4,000 Liters/Hour (880 Gallons/Hour)Glue Water: 8,000 Liters/Hour (1760 Gallons/Hour)Solids Space: 16.4 dm³ (16.4L)Min Operating Liquid Flow: 11 Liters/HourMin Operating Liquid Pressure: 0.1-0.3 bar (10-30 kPa)Drive: 30kW MotorRun Up Time: 9 MinStopping Time: 10-15 Mins with Brake AppliedDrive Motor Speed: 1420-1500 RPM 50Hz (1700-1800 RPM 60Hz)Bowl Spindle: 4850-5125[tel:4850-5125] RPM 50Hz (4785-5065[tel:4785-5065] RPM 60Hz)Circulation Counter 118-125 U/M Previously used for Butter oil Polishing

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Drilling capacity: 40 mmThroat: 870 mmSpindle taper: 0   SPECIFICATIONS Drilling capacity steel Ø  35 mm Drilling capacity cast iron Ø  40 mm Tapping MM 25 Spindle taper Mk  Mk 4 Spindle diameter Ø   60 mm Spindle travel  180 mm Max. distance spindle - table  80 mm Min. distance spindle - table   870 mm Floor / table area    700 x 600 mm Power2.2 kW Spindle speeds / ranges 65 - 1750 VARIO Rpm DIMENSIONS Length  1200 mm Width  800 mm Height 2400 mm  

5 axis X-Axis 800 mm Y-Axis 800 mm Z-Axis 600 mm Interference circle diameter 1070 mm Distance Spindle Up to 823,5 mm Machine-Table Load 1000 Kg Maximum rapid travel X/Y/Z at TCP max 75 m/min Cutting-Tool Interface HSK-A63 Motor Spindle Power at CDF 25% max 50kW Engine Spindle Torque at CDF 25% max 187 Nm Machine weight 13000 kgs Wiring diagram: 2526-95-64934955 Resy Filtration system Model : 14-P00449-3 Serial : KBF- 452/500 Erowa pallet changer Model RobotEasy Serial number ERE1364 Year 2014 Weight 1300kgs Hyfra Pedia chillers Model sigma 7-s

Column Drilling Machine ALZMETALL NOLL Spindle: CM3 Spindle exit: 160 mm Table size: 500 x 400 mm Maxi distance spindle nose/table: 600 mm Throat depth: 290 mm Splindle speed by belt variator Spindle motor: 1,3 kW Manual descent 2 speed ranges Superior protection cover is missing Voltage: 380 V Width: 700 mm Depth: 900 mm Total height: 1900 mm Weight: approx 600 kg

Full salad washing line 2 x Washing units, destoning, infeed conveyring, vibros, all electric panels Removed working and have wiring information as was installed and decommissioned by same engineers. Please message for more photographs

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

CARVING machine type ANDREONI STANDARD 12 second hand machine working conditions : good Technical details : - rotary device for the simultaneous rotation of the model and the pieces (3D) - manual chuck of mandrins unit - also to work with flat pieces n.12 spindles distance betwen spindles mm. 300 rotation speed by HF converter rpm 6.000 / 12.000 max. working length ( on rotation ) mm. 1900 net weigth kgs. 2500 volt. 380/50 With tools : Yes ( as in photo attach )

CARVING machine type ANDREONI STANDARD AL 12 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.12 spindles distance betwen spindles mm. 300 n.02 rotation speed of spindles rpm 12.000 / 18.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5100 x 3100 H=mm.1500 ( machine assembled )

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.

Shrink sleeves Tunnel, for shrinking sleeves. Year of Make: 2002 Overhaul: partially overhauled 2020 Capacity: 6000 Units p. hour Without gearbox.

WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS

Vertical machining center ARES SEIKI S6040 with roto pallet Make: ARES SEIKI Model: S6040 YEAR 2019 X-AXIS TRAVEL 600 mm Y-AXIS TRAVEL 400 mm Z-AXIS TRAVEL 500 mm DISTANCE SPINDLE NOSE-TABLE 180-680 mm RAPID FEEDS X-Y-Z 36 – 36 – 48 m/min SPINDLE 12000 rpm; 5,5-7,5 kW; ISO 40 – DIN PALLET N.2 ; 700X400 mm MAX ADMITTED LOAD 250 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS CONTROL UNIT MITSUBISHI M80 WEIGHT 6600 Kg OVERALL DIMENSIONS 3660 x 2585 x 2780 mm ACCESSORIES HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; PORTABLE HANDWHEEL ; ETHERNET PORT ; RS 232 SERIAL PORT NOTE MACCHINA COMPLETA DI N.13 CONI PORTAPINZA; N.1 CONO PORTAFRESA; N.1 TASTATORE 3d.

Sheet thickness: 6,00 mmRoll width: 250 mmNumber of rolls: 21  Roll diameter: 30 mm Mechanical pressARKU - RM3025 + AH 1000 MACH-ID 8862 Make: ARKU Type: RM3025 + AH 1000 Year: 1992 Decoiler Max. width 350 mm Clamping area coil internal  mm Coil diameter 1500 mm Work load 1000 Kg Straigtner Width 250 mm Roll diameter 30 mm Number off rolls 21 units Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2

Sheet thickness: 6,00 mmRoll width: 350 mmNumber of rolls: 9  Roll diameter: 30 mm Mechanical pressARKU - RM 3035 + AH 2000 MACH-ID 8861 Make: ARKU Type: RM 3035 + AH 2000 Year: 1995 Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:1500mm Height:2200mm Weight:3700kg

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                           FS 40-10-30-4- AOW                                                                 B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                        FS 40-10-30-4- AOW                                                                               B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Label Flexo Printing Machine Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 7, gearing 1/8”CP Between station 1 and 2, there is a turner bar equipped with web guide Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder 4 x 255 l/cm volume 4,5 cm³/m² 6 x 140 l/cm Lateral register: ± 5 mm Longitudinal adjustment: Unlimited at all printing and die cutting stations, choiceectable from mobile control console, smallest adjustment 0,05 mm. Web inspection : Tecscan web inspection system Drying: Optimized hot air drying Laminating station Station 8 is a laminating station that consists of a foil unwinding unit, where web guiding ensures the foil is directed straight to the adhesive station.  ...

Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 8, gearing 1/8”CP Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder see list Lateral register: ± 5 mm Longitudinal adjustment unlimited at all printing and die cutting stations, selectable from mobile control console, smallest adjustment 0,05 mm. Automatic register control: Sensotec automatic register control, web to web comparison for print stations and web to cylinder for die cutting stations. Front to Back Register control system Web inspection Tecscan web inspection system Drying optimized hot air drying Web turner rail mounted moveable platform with E&L web guide. Webguide Fife web guide bef ...

Drilling capacity: 80 mmRadius: 2781 mmSpindle taper: 76  

Drilling capacity: 80 mmRadius: 2781 mmSpindle taper: 76  

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...