used Urology lasers for sale

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now

Laserset for ProSet9400 - see all details in the picture. The Lasers are out of a well working ProSet. Available: on stock

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

Laser Cutting Machine Manufacturer: Amada Type: LC 1212 A II 2.0 kW Year of construction: 1998 CNC control: Fanuc 16-L Operating hours: approx. 19,000 Max. travel range: X/Y/Z: 1270 x 1270 x 300 mm With resetting X/Y/Z: 2540 x 1270 x 300 mm Sheet thickness max.: 9 mm Table load max.: 220 kg Cutting speed: 0 – 20 m/min Positioning speed X/Y/Z axis: 40/40/20 m/min Positioning accuracy: +/-0.01 mm to 500 mm Repeatable positioning accuracy: +/-0.005 mm Parts disposal flap Y x X: 1270 x 530 mm Air requirement: 250 l/min Machine weight: 6,000 kg

We would like to sell our used laser cutting machine Amada, type LC-3015, built in 1997 due to lack of space: Table length :3000mm, Table width: 1500mm, Laser power 3kW, Hours: 8103, max. table load of the exchange table 750Kg, Max. cutting thickness 20mm (normal steel) 12mm (stainless steel), Procedure speed X,Y/Z 40/20m/min , Extraction, cooling BKW The Falgenbalk has been renewed by us.

We hereby sell a good AMADA laser cutting machine which is in very good condition. The laser machine is sold completely incl. software for programming, machine documents, water chiller, Extraction system and transformer. Specifications: Year of construction: 1998 Switch-on hours: 22.000h Laser Machine LC-2415 C2000 B / Model: LC2415 A2 Model: FANUC C2000 B Nominal laser power: 2000 WATT Max laser power: 2000 WATTS Laser wavelength: 10.6 μm Pulse width: 100μs-cw Steel diameter: >27mm Laser gas consumption: approx. 10l/h Laser protection class 4 Weight: 6.500 kg

The machine has undergone a thorough inspection by an authorized AMADA service technician CNC laser cutting machine Amada LC3015 X1 NT 4KW with sheet metal magazine Year of construction: 2008 Type: Amada LC3015 X1 NT Laser power: 4kW Table: 3,000 x 1,500 mm Sheet metal magazine: Amada AS LUL 300X1 Cooler Ridel Donaldson Suction

For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...

Ref.Nr. 00809 Description of the system 3D FIBER laser cutting machine Manufacturer: BLM ADIGE Model LT Free Year of construction 2017 Number of axes of laser head 5 axes Laser power 2000 watts Operating hours (15.04.2024) 869 h With radiator With extraction system Sideros - Footprint: without suction And Radiator Length: 5.50M Width:3.70M Height:4M (Radiator and extractor: side by side, length 3m, width 1.70m, height 2.70m) Floor space: approx. 24sqm Customer has only cut stainless steel 4mm so far. (According to the manufacturer, you can cut up to 6mm thicknesses. Until now, the machine has been used for machining stainless steel housings Without software - (customer uses in-house software) Supply voltage 400V +-10% Power consumption 16 kVA Technical condition: The laser is in very good technical condition Maintenance was carried o ...

The Bodor laser cutting machines offer perfect cutting quality at an unbeatable price. We will be happy to make you a suitable offer.

Bosche Volume Scale 3D Silence Volume and weight recording for master data entry and master data maintenance in the warehouse Exact volume and weight recording for warehouse management and order picking. Non-contact measurement with laser sensors Weighing range up to 150 kg Easy integration into IT systems Ideal for precise freight calculation and master data entry ✔ Professional weighing technology ✔ Original BOSCHE quality Fast - Accurate - Reliable Modern warehouse management and picking require exact article master data. Quality improvement in the process includes the exact determination of dimensions (belt dimensions) and weight for exact freight accounting and the actual transport or storage space required. The BOSCHE Volume Scale 3D is the ideal tool for contactless volume and weight detection of packages. The semi-automatic measurement (length x width x ...

Ref.Nr. 00834 Name of the system Used CO2 laser cutting machine Manufacturer: Bystronic Model ByAutonom 3015 Year of construction 2013 Laser power 4400 watts Working area 3000 x 1500mm Hours Power on 47214 Vacuum Pump 32467 Turbo Blower 32126 Cutting Time 17259 Automatic change system Byvision CNC control With cooling system With extraction system Cut Control for cutting process monitoring of stainless steel and steel ByposW adaptive optics for a constant focus point over the entire cutting area and automatic focus point adjustment when changing materials Easy piercing with Controlled Pulsed Piercing (CPP) Byvision CNC with sensitive 22'' touchscreen operator terminal and uninterruptible power supply UPS low-pressure cutting, reflection absorber to decouple harmful reflections when cutting stainless materials, tools and accessories.  ...

The laser system for automatic sheet metal processing consists of two - Laser cutting machines Bystronic ByAutonom 3015 - Bystronic ByLaser 6000 laser sources - Laser loading/unloading systems Bystronic Bytrans Cross 3015 - Bystronic Bycell Cross 3015 storage systems - Suction Donaldson DFPR06-SPRK Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting range: 3048 mm (x), 1524 mm (y), 80 mm (z) Max. positioning speed: 120 m/min Max. axle acceleration: 30 m/s² Max. workpiece weight: 890 kg Laser power: 6000 watts Wavelength: 10.6 μm Max. structural steel: 25 mm Max. stainless steel: 25 mm Max. aluminum: 15 mm Location: Zweibrücken Another identical plant is available at the site. Professional assembly and loading are included in the offer.

The laser system for automatic sheet metal processing consists of two - Laser cutting machines Bystronic BySprint Fiber 3015 - Laser sources Bystronic Fiber 4000 - Laser loading/unloading systems Bystronic Bytrans 3015 - Bystronic storage systems - Suction Donaldson Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting range: 3048 mm (x), 1524 mm (y), 70 mm (z) Max. positioning speed: 100 m/min Max. workpiece weight: 890 kg Laser power: 4000 watts Max. structural steel: 20 mm Max. stainless steel: 15 mm Max. aluminum: 15 mm Location: Zweibrücken Professional assembly and loading are included in the offer.

CNC laser cutting machine Bystronic Bystar 3015 -Total power 125 KVACo2 laser source Bylaser Power 5200 watts,CNC rotary axis for chuck 315 mm with counter bearing for pipe processing cutting power ST37 - approx. 25 mmstainless steel 1.4301 approx. 20 mm, aluminium approx. 12 mmcutting speed max. 50 m/min, positioning simultaneously max. 113m/mincar. Loading device Byloader with sheet metal dusting deviceOnly one-layer operation ! approx.27,500 power-on hours - approx. 6000 hours of laser hours; ready for immediate use

Laser cutting machine Bystar 3015with Bylaser 4000 , 4 KW laser source incl. interchangeable table system, cooling system,kompl. Switch cabinet combination with CNC and laser control, operator protection in the cutting area, 2 cutting buttons, reflection absorbers, cross-jet,documentationdocumentation laser a 19,000 hmaintained by Bystronic.

Bystronic Bystar 3015 Fiber Laser Cutting Machine – Excellently maintained machine to hand over due to new acquisition We are selling our Bystronic Bystar 3015 Fiber laser cutting machine because we have purchased a new Bystronic laser system. This machine has accompanied us reliably over the years and is in excellent condition. It will be ready for dismantling on 10 February 2025 and will then be available for transport. Technical details and highlights: Manufacturer: Bystronic Model: Bystar 3015 Fiber Operating hours: 32,474 hours Laser hours: 14,900 hours Year of Make: 2017 Equipment: Automatic nozzle changer that ensures efficient work and minimal set-up times. Upgrades and maintenance: New cutting head V2.2 (2024): In July 2024, the line was upgraded with a new cutting head for €58,000, providing even more precise cuts and improved productivity. New Donal ...

Ref.Nr. 00792 Name of the system: Used laser cutting machine Manufacturer: Bystronic Model Bystar 4020 Year of construction 2015 Power On (August 2024) 27.749 h Cutting time (August 2024) 9,665 h Power 6000 watts Control Byvision Working area 4000 x 2000mm Cutting range 170mm Interchangeable table system with 2 interchangeable tables + Extraction system + Cooler Cuttable thicknesses (max) steel 25mm Stainless steel 25mm Aluminum 15mm Footprint l x w x h 13850mm x 7300mm x 2350mm Machine weight 18000 kg Condition Technically very good condition Delivery by arrangement Immediately possible

Ref.no.00855 Plant Name: Used Fiber Laser Cutting Machine Manufacturer: Bystronic Model Bystar Fiber 3015 Year of construction 2017 Working area 3000x1500mm Power 10 KW Revisions of cutting head conversion 2024 Machine On (December 2024) 48,000 h Laser On (December 2024) 11,000 h With radiator With extraction system Without automation Submission date Immediately, by arrangement Condition under power

ConceptLaser M1 cusing Year of construction: 2015 Laser: Yb (ytterbium) - fiber laser Power Laser: 400W Wavelength: 1070nm Laser beam diameter: 50-200μm Production speed: 2cm³/h to 10cm³/h (depending on material) Layer thickness LaserCUSING:® 20μm - 80μm Inert gas consumption: approx. 1m³/h Dimension construction chamber: 250x250x280mm Height: 280mm (minus the building plate thickness) Field of exposure: 245x245mm Scope of machines - Laser sintering system M1 cusing 400W - Filter system TBH (FP 15 EX II 3D) - Rofin fiber laser unit Machine weight: 1,7to (without accessories) Machine mileage:41612h Laser running power:19191h

Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminium and titanium alloys The Concept Laser M2 cusing Multilaser is designed in accordance with ATEX directives and enables thus a safe processing of reactive materials. Like all machine solutions from Concept Laser, the model has a spatial separation from the process chamber and handling area for ease of use and safety. The system is robust and suitable for 3-shift operation. In addition, the laser source and filter technology are integrated into the system, resulting in a small footprint. The large filter area of 20 square meters reduces the change intervals of the filter, so that the system availability is increased. In addition, the M2 cusing Multilaser has a water-floodable filter as standard, where a safe filter change is ensu ...

Power: 100 kWX - axis: 300 mmY - axis: 400 mmNumber laser heads: 0  CNC Brand: _Unknown / OtherCNC Model: Lasersoft 3 D Make Deckel Maho Type DML 40 S Year 2001 LASERSOFT 3D - 6 Axis Table length (mm)L = 400 Table width (mm)W = 300 Longitudinal X (mm)X = 300 Cross Y (mm)Y = 400 Vertical Z (mm)Z = 500 Laser 100 W3 Mechanical axis 3 Optical Axis- Automatic repositioning - DECKEL MAHO LASERSOFT 3 D - Direct 3 D Autocad import - Filigran Kavitaeten 0.04 mm - Keramik machining possible - Vertical machining possible - Dimensions - Length : 3.500 - Width : 3.000 - Height : 2.000 - Weight : 2.200

The SUPERA-3015 A laser cutting machine is a general purpose type with fiber laser. It offers high dynamics in high-speed cutting of thin sheet metal, and they have the technology and know-how on board to produce stable and consistent parts even for thicker material, where the maximum thickness is limited only by the output power of the laser. Standard equipment A SUPERA 3015 comes with the following standard equipment:  An automatic changing table for an almost continuous cutting process  Two cutting tables with grid support  Boxes for scrap and dust removal under the working area of the machine  KEBA – LTI control with practically unlimited program memory  Integrated laser pulse generator  21.5 touch screen operator panel with graphical user interface  Mouse and keyboard  Cutting head for fiber laser source  Automatic selection of gas valve to  ...

-Exhibition Machine- The SUPERA-3015 A laser cutting machine is a general-purpose type with fiber laser. It offers high dynamics in high-speed cutting of thin sheets and they have the technology and know-how on board to produce stable and constant parts even for thicker material, where the maximum thickness is limited only by the output power of the laser. Standard equipment A SUPERA 3015 comes with the following standard equipment: An automatic shuttle table for an almost continuous cutting process Two cutting tables with support in the grid Boxes for scrap and dust removal under the working area of the machine KEBA – LTI control with virtually unlimited program memory Built-in laser pulse generator 21.5 touch screen operator panel with graphical user interface Mouse and keyboard Cutting head for fiber laser source Automatic selection of the gas valve to support two di ...

Model Ultima Hybrid version UBB 170 t/3200 mm New machine trade fair stock machine SPECIAL PRICE YEAR OF YEAR 2022 Linear CNC measurement for depth Y1-Y2 ESA 860, 2D graphical CNC control, 15 touch CNC-Y1Y2-X-R-Z1-Z2 backgauge on ball screws CNC-controlled hydraulic crowning 1 set of upper tools PS,135-85-R=.8, 3x 835 + 1x 805 divided 1 set of Rolleri M460-R sub-tools CNC-controlled bending aid CE Lasersafe Control ESA 860W, PC graphical control with automatic bending sequence calculation, collision warning 19 inch touch screen incl. remote assistance via Teamviewer and workstation software Backgauge 6-axis CNC backgauge Y1Y2-X-R-Z1-Z2 Drive SERVO DRIVE hybrid up to 70% energy savings EXTRA high speed 200 mm/s from and up Nvs32 CNC-controlled bending aid Lower tool holder Small narrow table, width 60mm x height 110mm Front support arms 2 heavy supp ...

DMG Lasertec 20 + PH10 I 100 Lid Maho Mori Seiki PrecisionTool Hersteller [manufacturer]: DMG Mori Seiki DMG Deckel Maho + Linear Magazine Sauer Baujahr[construction year]: 10/2013 Type [ type]: LaserTec20 Control unit: Siemens 840D SolutionLine Incl. control panel handheld Fiber laser system 20 W YLP-C-1-100-20-20 Active Medium Ytterium Wavelength 1065 nm (1055 nm – 1075nm) Average power 100W Repittion rate 20kHz – 100kHz Pulse length 100 ns- 150 ns Travel Distances X-Axis: 200mm Travel distances Y-axis: 200mm Travel distances Z-axis: 280mm C-axis clamping surface: 190mm Rotation range C-axis: 360mm Rotation rotary table 150 rpm Weight approx.: 3.600kg Technical documentation/documents available in detail

Control Siemens 84 0Dsl - Operate Speed [rpm] 18000 Travel X/Y/Z [mm] 735/650/560 Tool pick-up HSK-A 63 Spindle: Motor spindle technology Speed 18,000 rpm Power 35 kW Torque 111 Nm Tool holder HSK-A-63 Media Feedthrough KSS + Blown Air NC swivel rotary table: A-axis +/- 120° C-axis 360° Speed 1,000 rpm Clamping surface 680 mm Table load 500kg Laser: Laser Lasertec 65 3D Laser Type Fiber Guided Diode Laser Power 2,500 watts Focusing lens, 200 mm focal length Processing nozzle 3 mm spot diameter Cooling water-air cooling unit with 6 kW Windows 2x laser safety windows Equipment/accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Workpiece Measurement Infrared Probes Tool Measurement BLUM Laser Emulsion Mist Separator Mechanical Kinematics Measurement 3D quickSET Setup opera ...

Fiber laser cutting machine 1500x3000 mm 12000W Raycus laser source High-performance machine base. High-performance servo motors. Intelligent cutting control system, easy operation; Fast start-up, supported by segment and steppiecing technology; Specialized air duct with oversized caliber, makes smoke exhaust smooth. Fully enclosed design; European CE standard laser protection. Two shuttle tables offer a high level of safety and comfort Technical Parameters: Working area 3000x1500 mm X-axis travel 1520 mm Y-axis travel 3020 mm Z-axis travel 300 mm X,Y positioning accuracy ±0.05 mm X,Y repeat positioning accuracy ±0.03. mm Acceleration 1.3 m/s² Max. Simultaneous positioning speed 120 m/min Table load 3000 kg Machine size 8100×2812×2640 mm Laser power 12000W Raycus FSCUT8000B control system Connected load 68 KW Voltage: 380V/50Hz Prices DPL-1530 H ...

6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 M ...

The DPL-6030/40/5 axis fiber laser system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as ovals Profilen.In the table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-6030/40/5 axes Laser shaft length 1070 nmLaser power 2000W IPG fiber laserConnected load 13.5 kWMax driven axes 4 - 7 ( 7 axis option )X./ Y axes Positioning accuracy ±0.08 X / Y axes Repeatability ±0.04 X / Y axes Travel speed 80 m/minMax, cutting speed 30 m/minMin. Cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 6 mm , Stainless steel: 5 mm Cutting material stainless steel, black steel St37 , titanium ...

The DPL-7040/5 axis system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as oval profiles. The table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-7040/5 axes Laser wavelength 1070 nm Laser power 2000W IPG fiber laser Connected load 13.5 kW , Max driven axes 5 ,X./ Y axis positioning accuracy ±0.08 X / Y axis repeatability ±0.04 X / Y axis travel speed 80 m/min Max, cutting speed 30 m/min Min. cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 7 mm , Stainless steel: 6 mm cutting material stainless steel, black steel St37, titanium, aluminum and much more. Machi ...

Three Chucks Laser Tube Cutting Machine Suitable for heavy-duty processing and pipes of various shapes For pipe diameters from 20 to 350 mm Minimal to no waste Upload up to 12m long pipes Unloading up to 9m Powerful servos with high speed and precision in positioning Automatic uploading and unloading of tables CW fiber laser 1000-6000W CAM software for managing the machine Optional: Weld seam detection Laser swivel head

Carpentry Universal Circular Saw used Type: 2003 Cutting height: 200 mm Swivel 45 degrees Turntable rotatable 135 degrees Motor power 7 kW Laser Cut Display Roller conveyor right approx. 2350 mm with stop ruler and stop pawl Functionally tested Shipping available at an additional cost.

CNC Portal Laser Cutting Machine Manufacturer: ESAB Type: Alpharex AXC 7000 Built: 1998 CNC control: NCE620 Working range: 5,000 mm x 27,000 mm Laser type: TLF 4000 t Suction table: Beuting without suction

Slitter rewinder Euromac The machine is like new and has only 5800 bh Applications :Foil, Paper _Laminate and Ethylenium Foil, Flexible film =15 μm - 200 μm Paper = 30 to 120 g/mm² Aluminium foil: Coated aluminum foil 25-70 my, Laminated Alufoils 40 -150 g/m2 Embossed Alufoils 105 -160 my Max. working width = 1200 mm Min. working width = 25 mm Max. speed = 500 m/min, Diameter rewinder = max. 600 mm 2x friction shafts = 76 mm, 2x friction shafts = 150/ 152 mm, 2x expansion shafts = 76 mm 2x expansion shafts = 150/ 152 mm The winding can be operated with contact (lay-up roller) or with gap. Unwinder (shaftless) diameter diameter max.= 1000 mm / core 76/ 150 /152 mm, Cutting system = paper cutting, Side Edge Control Manufacturer BST Gluing table at the unwinder, Laser system for sleeve positioning Roll removal device, Trolley for changing the lowe ...

Laser system 50 Watt, FOBA DP50 for marking and engraving Ideal for beginners or as an extension Deflection unit Scanlab, 254 mm Rodenstock lens with MB RAM and 17 monitor arm, Diode pumping chamber only about 2500 hours in use ready for use, built in 2003 Options: - Suction - other lenses - Machine table (various versions) - Double head/beam splitter Laser system completely cleaned and tested 6 months warranty excl. pumping chamber, place of warranty Lüdenscheid VAT will be shown Delivery EXW, collection possible On request also: Commissioning, instruction and training, maintenance concept, sampling of your workpieces

Laser system 50 watts, FOBA Vario RD 50 for marking and engraving, new pump chamber, deflection unit TS 10 and 254 mm lens, Windows XP with 1.4 GHz, 512 MB RAM, Termotec cooler P313, laser protection class 1, Z-axis, side door, used, ready for use, year of construction 2005, Options: Exhaust system, other lenses, Laser system completely cleaned and tested, 6 months warranty, Subject to prior sale Delivery: EXW, pick-up possible. We also offer commissioning and instruction / training. We also offer future service support (support, maintenance and spare parts).

Multi-saw edger by FOD Bydgoszcz DPPA-II-50-E with electronic blade setting – Polish production – DTR – fixed sleeve – movable dial with the possibility of programming 8 fixed dimensions TECHNICAL PARAMETERS: - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speeds - feed motor power 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electronic adjustment of disc spacing with programmable fixed dimensions - fixed edging sleeve 60 mm - one movable disc - two rows of anti-kickback pawls - three lower pulling rollers - two upper pulling rollers - two lasers - shaft support Transport dimensions: 270x165x220 cm weight ~ 2000 kg

Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water requirements Water pressure: between 1 and 3 bar Temperature: between 5 ° C and 12 ° C

Laser type Gen3 / 160 - with 64 diodes current meter reading: 73,556 exposures. Laser exposure time: 1,830 hours Outer Drum Computer-to-Plate Platesetter for Thermal Plates 830nm Throughput 17 plates/hr at 2540 dpi Bacher tightening punching distance 425 mm Panel formats 240mm x 240mm up to 670mm x 760mm With software Prinect MetaDimension 10 ( License Service Dongle ) Software Prinect, Signastation (2012), Format 75, Version 11, M-Kit Prepress Press, Edition 2011 Workstation monitor mouse complete with accessories with documentation DVDs and - Plate washout station C85

4 up Thermal CTP Heidelberg Suprasetter A 75 year 2008 Two Lasers, 20 plates per hour 200.000 Autoloder Punch Platestacker Prinect MetaShooter or Fzepp9jti Prinect Integration Manager RIP/workflow v.15 LIC-dongle Price: on request

Ref.Nr. 00791 Name of the system Blechturm Flat goods storage Manufacturer: Heitling GmbH & Co. Profil systems today Model HEI – TECHMAT - II Built in 1999 Payload/tray 34 kN Number of compartments 59 Storage capacity 2006 kN Sheet format 2000x4000mm Stacking height 55/70 Width: approx. 7,500 mm Depth: 5,000 mm tower + 5,500 mm with extended cassette Height: approx. 7,500 mm Deadline by arrangement - immediately Condition To be viewed under power Currently used next to a laser cutting system

Hobart GXHK-70N Dishwasher GX Series Glass Washer SMARTRONIC with 3 automatic programs 60 sec. / 90 sec. / 120 sec. Up to 60 baskets (1500 jars) per hour (basket size 500 x 500 mm) Built-in water softener – ensures optimal water quality and provides a radiant finish Washing tank capacity – 10.8 liters Water consumption/cycle – 2.0 liters Water pressure requirement. – Cold or hot supply, 0.6 – 6.0 BAR Electrical load – 7.6 kW 400/50/3 More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Travel (X,Y,Z): 3000x2100x190 mm Number of spindles vertical drill head: 1 pc. The new AXOLOX series of the proven CNC wood milling machine New design and brand new and innovative constructed from Forescolour panels. The new material is very environmentally friendly and the basis for even more dynamics. With sophisticated laser safety technology, even in the basic version. Available in new standard sizes (from 1000x1000mm - 6000x2100mm machining area) Extensive range of accessories and optional equipment Ideal for nesting machining and compatible with almost all common CAD programs. Featured here AXOLOX 3021 - Machining size 3000x2100mm Ideal for processing complete half-format panels Possible options: Commissioning Basic course Tool set 10 pieces in the Systainer Vacuum table Pneumatic table opening with adjustment in the long version for edge processing up t ...

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

bizhub C227 = Equipment number: 1823718979 – Color MFP Incl. DF-628 Original Feeder, DK-514x Base Cabinet bizhub C227 Communication center with 22 ppm in b/w and color, standard Emperon pressure controller with PCL6 (XL 3.0), PCL5c, PostScript 3, PDF 1.4, XPS and OOXML support, paper capacities of 2 x 500 Sheet and 100 sheets from stacking sheet feeder, formats from A6 to A3, grammages from 60–256 g/m2, 2 GB Storage, 320 GB hard drive and 1 GB Ethernet as standard OC-514 Original Cover Cover instead of an Original Feeder DF-628 Original Feeder Automatic document feeder for up to 100 originals, with duplex function PC-114 Universal Cartridge A5-A3, 1 x 500 sheets, 60-256 g/m2 PC-214 Universal Cartridge A5-A3, 2 x 500 sheets, 60-256 g/m2 PC-414 Large Capacity Cartridge A4, 2,500 sheets, 60-256 g/m2 DK-514 Base cabinet Storage space for paper supplies and cons ...

Several used robots Brand: KUKA Type: KR 150L150SP/2 Year of construction: 2000 Hours of operation: approx. 700 Nominal / load capacity: 150 kg Additional load at rated load: 80 kg Maximum total load: 230 kg Arm length: 1200 mm Max range: 2610 mm Repeatability: +/-0.2 mm Engine power: 19.8 kW Working volume: 51 m³ Weight: 1135 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The pictured robot  ...

Several used robots Brand: KUKA Type: KR 200L 120/2 Year of construction: 2000 Hours of operation: approx. 800 Nominal / load capacity: 120 kg Additional load at rated load: 80 kg Maximum total load: 200 kg Arm length: 1400 mm Max range: 2810 mm Repeatability: +/-0.3 mm Engine power: 19.8 kW Working volume: approx. 65 m ³ Weight: 1140 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The picture ...

Laser cutting machine from our exhibition with 150 watts of laser power Delivery time: immediately available ----- Turn it on and get started ----- ----- machine with only about 50 operating hours ----- ----- Year of construction: March 2022 ----- professional machine ----- - incl. Windows10 PC system / monitor / keyboard / mouse - Manufactures installed cutting and engraving software in German - Coordinated and immediately ready for use - Machine masters very fine engraving as well as precise cutting of thick wood or acrylic glass. - very versatile cutting machine. - Cutting wood up to 20mm thick - Cutting of arcyl glass and many other plastics - cutting fabrics, plastic fleeces, etc. - Cutting rubber mats - Engraving on wood, concrete, stone, many plastics - Production of stamps - Heavy industrial quality - Travel 1300 x 900mm - Drives with hybrid  ...

Laser welding machine with 200 watt laser power - incl. 4th axis (axis of rotation) - For cylindrical welding tasks - Lamp-pumped YAG laser - Point welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - Additional CCD microscope with reticle - Current, pulse width, repetition rate, frequency at the controller adjustable - incl. inert gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200Watt power - External cooling - Power connection 230Volt / 32 Amp. Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg . . . . . . -------------------------------------------------------- ...