Injection molding machine 3 colors
(horizontal /vertical/ and 3. in L-position with protective
housing)
Pvlzwy
immediately available from our warehouse in Hannover
Make: Arburg
Type: 420C 1000-150/150/60
year of construction 2003
Control: Selogica
Hours: 20092 h
+Schließeinheit+
Clamping force: 1000 kN / 1000 to.
tie bar distance: 420 x 420 mm
platen size: 570 x 570 mm
Injection unit 1 (150 unit)
Screw size: 15 mm (high shut-off fixed)
Injection volume: 17 ccm
Injection weight: 15 gr.
Injection pressure: 2750 bar
Injection unit 2 (150cc unit)
Screw size: 15 mm (highly screwed fixed)
Injection volume: 17 ccm
Injection weight: 15 gr.
Injection pressure: 2750 bar
Injection unit 3 (60cc unit)
Screw size: 15 mm (highly screwed fixed)
Injection volume: 17 ccm
Injection weight: 15 gr.
Injection pressure: 2080 bar
Extras
1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw
injection molding machine
mold clamping force 1000 kN voltage 400 V / 50 Hz
1 Vertical injection unit instead of clamping tie bars mounted on
carriers for 2nd injection unit, manually operated, working position
adjustable between 70 and 250 mm VE-404/02
1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150)
VE-902/00
1 Technology level 2 - servo-controlled Hydraulic system with two
control pumps for controlled machine movements, with path-dependent,
controlled target ramps. The build-up of the tool clamping force is
programmable and controlled. The clamping force is servo-controlled
via the second pump. The nozzle contact force is programmable. The
contact force can be set manually, the value is maintained in a
controlled manner. This technology level is a prerequisite for
simultaneous movements of the nozzle, ejector and optional core
pullers. Including equipment package for extended travel movements.
VE-132/03
1 Technology level 3 Hydraulic system with 3 control pumps for
simultaneous movements of the main axes and for faster movements of
the secondary axes. For the 2-K machines as hydraulic system for the
2nd injection unit (prerequisite is technology level 2, VE 132/03)
VE-130/40
1 heating tape for open nozzle VE-320/00
1 Injection unit 150 for vertical injection into mold partition for
2-component processing VE-136/02
1 position controlled screw with control valve at the injection unit,
incl. controlled back pressure, nozzle contact force manually
adjustable VE-561/20
1 position-controlled screw with control valve for multi-component
machines, incl. controlled back pressure, nozzle contact force
manually adjustable - for injection unit 2 VE-561/30
1 injection unit 60 for horizontal injection into mold partition as
3rd injection unit for multi-component processing (L-position)
VE-906/00
1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70
mm, incl. special parting line and full protection VE-907/00
1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed
and pressure reducing valve, in highly wear resistant design with
sintered metal backflow preventer, i.e. highly wear and corrosion
resistant for processing thermoplastics with highly abrasive or
corrosive components and for high temperature materials (L-position)
VE-908/00
1 Open nozzle 15 mm wear-resistant, without heating band (L-position)
VE-909/00
1 Nozzle tip with radius 15 (L-position) VE-910/00
1 Heating tape for open nozzle (L-position) VE-911/00
1 Position-controlled screw for the third injection
Germany
