Manufacturer:
(Category: 1107)
Sale due to restructuring. Stainless steel ventilation Tower 4700 mm, diameter height approx. 1250 mm, material stainless steel Tower now available. Loading with a forklift Questions under 02131 / 4064849 Mr. Rössler
Heat exchanger for cogeneration block cogeneration with 250 kVA 2 x available
Storage tank containers tank containers (diesel, canola oil) for heat and power generation Built in 2006 24,000 L capacity with agitator Manufacturer: Krampitz tank systems TÜV Hannover / Sachsen Anhalt
Loaded Now 6 Dry Transformers in Paris
Gestra Condensate Compensator 50 l, 8 bar stainless steel with connection flanges DN 50, DN 80, DN 20, with stainless steel shut-off valve DN 20, emptying oval flange and 3 foot spindles + Check valve DN 80 Cylinder 240 Klepper floors each 100 long
Additional title: gas burner for steam generator, Min. capacity: 900 kW, Max. capacity: 5100 kW, Min. pressure: 10 mbar, Max. pressure: 140 mbar
Refrigerant: R410a, refrigerant capacity: 10kg, oil type: RL32 3-MAF, oil capacity: 6.8l, max. low/high pressure: 29.5bar/45bar, cooling capacity: 76.9kW, weight: approx. 520kg. Documentation available. On-site inspection is possible.
Offer 25194 Specifications: - Power 20 kVA - Primary power 3 x 400 V / 3 x 17.5 A - Secondary power 3 x 400 V / 3 x 28.9 A - Connection 400 V / 63 A - Space requirement W 750 x D 550 x H 650 mm - Weight 220 kg
Offer 25185 Specifications: - Connected load 44 kVA - Nominal size 63 A - 6 220 V sockets - 3 Sockets 32 A 400 V - 2 sockets 16 A 400 V -Main switch - Residual current circuit breakers - Miniature circuit breakers - Protection class IP 44 - Connection cable with 63 A plug - Space requirement approx. W 420 x H 1100 x D 450 mm - Weight approx. 50 kg
Offer 25184 Specifications: - Connected load 44 kVA - Nominal size 63 A - 6 220 V sockets - 1 socket 32 A 400 V - 2 sockets 16 A 400 V - Protection class IP 44 -Electricity meter - Connection cable with 63 A plug - Space requirement approx. W 450 x H 1300 x D 450 mm - Weight approx. 65 kg
Key data: 8 KW
169 MW Power Plant in very good condition / Direct from the owner / Great Investment Opportunity Commercial Operation Start: January 2010 Contract Status: Operated under standby mode until December 2024 20 x Wartsila 20V32 8.45MW each, 60Hz HFO, But convertible to Diesel or Biodiesel. Green. ✅ Highlights • 20 Generating Sets (Gensets) mounted on steel spring foundations • Synchronous three-phase generators with turbocharged diesel engines • Comprehensive auxiliary systems: • Fuel treatment and booster systems • Black start generator • Charge air, cooling water, and exhaust systems • Steam generation and compressed air systems • PLC-based control & monitoring with central and local panels • MV power distribution with generator cubicles, switchgear, and transformers ⚙️ Current Condition • Running Hours: Most gensets remain withi ...
Searle Table Cooler DKG275-12 339208 air cooler from 2006, was cooling of a Jenbacher J412 (1,200 KW). 1 available 12 x 310 W, water/glycol, 10 bar Manufacturer: Searle Model No.: DKG275-12 Type: Table Cooler Serial Number: 339208 Fans: 12 Power motors: 12 x 310 W Medium: Water/Glycol Ab. Overpressure [bar]: 10 Year of Make: 2006 Weight [kg]: 2.054 Dimensions LxWxH [cm]: 760 x 230 x 130
Used 1250 kVA 50Hz Alstom 0.4/20kV transformer
Good day We offer a New 3500KVA ABB Transformer 20KV-400V
Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.
A SenerTec CHP unit is available. Heat output: 11.8kW-12.5kW, max. flow and return temperature: 85°C/70°C, operating overpressure: 5bar, rated electrical output: 5.5kW, power factor: 0.88, max. fuel input: 21.3kW, fuel: natural gas II. Documentation available.
A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.
Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.
Two Reisner chillers are available. 1) Smaller Reisner KWRS 50HK chiller, year of manufacture: 2014, refrigerant: R134A, operating pressure: 20 bar. 2) Larger Reisner KWRS 125 chiller, year of manufacture: 2007, refrigerant: R134A, operating pressure: 24bar, medium capacity: 80kg, volume flow: 170m³/h. Documentation available. On-site inspection is possible. Individual sale possible.
An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible.
