textile finishing machines used for sale

1 COATEMA UV-coating lamination line type SM31, year 2015, roller width 150 cm, HONLE device for UV coating, with MAHLO double sided scanner QMS Webpro-XS (O-frame) with measuring sensor/head for measurement of layer thickness The machine was bought new for a project which was not finalized and it has less than 200 working hours. Machine looks like an exhibition machine.

1 ARIOLI continuous steamer / ager type Mini G, year 2001, roller width 220 cm, working width 200 cm, inside fabric capacity 130 m

1 ARIOLI continuous washing machine type V21, year 2001, roller width 200 cm, working width 180 cm, 5 washing boxes, inside fabric capacity 30 m each box = 150 m

1 MCS high temperature jet dyeing machine type DYNAMICA SPRINT DYN-EF-6XJ-HT, 6 chamber, capacity 1500 Kg, year 2017, dye bath preparation tank behind the machine, 2 addition vats with mixer), TERMOELETTRONICA fully automatic dye process controller, machine fully inverter controlled

1 FERRUM laboratory hydro extractor, maximal loading capacity 2 Kg, 2800 rpm

1 KUSTERS 3-bowl rolling, glazing calander type 213.50-1800 3 bowls face roller width 2000 mm, working width 1800 mm Year 1990

1 MCS high temperature jet dyeing machine type DYNAMICA DYN EF 3XJ HT, 3 chamber, capacity 750 Kg, year 2014, HIDROVARIO nozzles with adjustable section, dye bath preparation tank behind the machine, 2 addition vats with mixer), TERMOELETTRONICA fully automatic dye process controller, machine fully inverter controlled

1 LAFER carbon brush emerising/peaching machine type ULTRASOFT TWIN TOUCH, year 2018, table width 2200 mm, 2 brushing rollers, entry and exit in the same side, plaiter exit, dust suction and filters

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected

1 BIANCALANI discontinuous active relaxation and stabilization machine for tubular or open knit type BRIO, year 2013 (only 1700 working hours) Reduction of residual spirality in tubular fabrics Flat tumbling treatment, without tensions or defects Good hand, softness, and volume

1 KUSTERS finishing foulard type 222.54-4600, face roller width 4.800 mm, working width 4.600 mm, the upper roller is S-roll, year 1969 and fully overhauled in 2011, AC motor with frequency inverter, entry with ERHARDT & LEIMER KF selvedge spreaders and scroll rollers, exit with banana roller and dancing roller for speed adjustment

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

1 RAMISCH laboratory 4-roll calander type RK 46P, face roller width 300 mm, working width 250 mm, calander indicated for following processes: rolling, glaze, friction, mate, Schreiner and embossing,  4 rollers with the following distribution (top to bottom):  steel diameter 120 mm, cotton diameter 240 mm, cotton diameter 240 mm, steel diameter 120 mm, both the steel rollers are electrically heated, linear speed adjustable up to 20 m/min., pressure adjustable up to 195 N/mm = 6 tons, unwinding from roller max. 300 mm diameter, winding to roller max. 300 mm diameter, double fabric spreader, central lubrication system to the 8 roller plain bearings, all rollers are connected through tooth wheels, friction possible and adjustable between 0 and 200%, weight of the machine 2300 Kg, dimensions width 1780 mm, depth 1250 mm, height 1600 mm

1 LAMPERTI raising machine type GB, year 1988, wire with 230 cm, 36 raising rollers, can run open width or tubular, updated with inverter to the main motor

2 MEZZERA high temperature jiggers type Celsius 143, year 2003, roller width 200 cm, working width 180 cm, electronic jigger, maximum batch diameter 1150 mm, maximum dyeing temperature 140 ºC, SETEX 838 dye cycle controller, with 2 add vats (1 with mixer)

1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1989 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled

1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm

1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins