pressure: 80 tthroat: 515 mmconnected load: 11,0 kWstroke: 70 mm: 640 x 550 mmno. of strokes: 38 Hub/minhole diameter in sheet thickness: mmweight of the machine ca.: 1,95 tdimensions of the machine ca.: 1,6 x 1,55 x 1,9 mith a wide range of accessoriesSee picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Revolver hole punch, with 12 stations, D in mm 35 x 4/47/50.5 x 14/8 x 37/48/ and other punches and dies Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Punching force: 25 t Punching capacity: D 50 in 3.5 mm Sheet thickness: 3 mm Colour: grey Total power requirement :16 A Machine weight: 3500 kg Projection: 700 mm Dimensions: 120 x 80 x 250 mm Punching diameter: 55 mm Machine Number: 18439-464
pressure: 26 tpunching cross-cut in cmm: 80 x 2,5 stroke: - mmtotal power requirement: 1,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3 x 3 x 2,5 mNo. 1096:Revolver hole punch 26 to.EDEL, type SMO 26/660/12built 1973 with throat depth 660 mmWorking area: diam. 80 x 2.5 mmDrive power: 1.5 kWAccessories:12-station tool magazineVarious punches and diesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tpunching cross-cut in cmm: 305 stroke: 55 mm: 625 mm: 0 - 100 mm: 1075 mm: 29 x 15 mmhole punching press: capacity (dia. x thick.): 57 x 8 mm: 5,5 kW: 1300 kg: 1600 x 700 x 1800 mmSome accessories are available with the machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
METALLKRAFT Profile steel shears / hole punch HPS 65 DS Combined hydraulic profile steel shear and hole punch with punch, notching station and flat steel, angle steel and profile steel shear - for simultaneous work on punch and profile steel shear Punching station - Punching pressure: 65 t - Punching capacity: max Ø 26 x 20 / Ø 57 x 10 mm - Projection: 305 mm - Stroke: max. 55 mm - Number of strokes: 25 strokes/min - Working height: 900 mm Steel bar shears - Round cutting capacity: max. Ø 45 mm - Square cutting capacity: max. 45 x 45 mm - Angle steel shears - Cutting capacity L-profile 90°: 120 x 120 x 12 mm - Cutting capacity L-profile 45°: 70 x 10 mm - Cutting capacity U-I profile: 120 x 58 mm - T-profile cutting capacity: 90 x 11 mm - Working height: 1,140 mm Flat steel shears - Cutting capacity 90°: max. 300 x 20 / 375 x 15 mm - Angle cut 45°: max. ...
Offer 23137 Specifications: - Pressure capacity 1000 KN - holes e.g. up to 40 mm Ø in steel 22 mm - or with special punching device up to 150 mm Ø in steel 4.0 mm - Stroke infinitely adjustable 0 to 70 mm - Stroke rate at 20mm travel up to 40 1/min - Projection 760 mm - Installation height 240 mm - Working height 1040 mm - Drive 400 V / 8.5 kW - Space requirement approx. W 750 x H 1900 x D 1750 mm - Weight approx. 1650 kg - with: - E.- Footswitch - Grain search device,
Punching force: 350 kN For example, punches a 23 mm hole in 12 mm steel Quick-change device Stroke release via foot switch Anchor table Range of tools is included in the price
Punching force: 300 kN Throat: 610 mm For example, punches a 30 mm hole in 9 mm steel Large support table with stop and folding cam Range of tools is included in the price
Punching force: 300 kN Throat depth: 610 mm Quick-change device Range of tools is included in the price
Punching force: 500 kN Projection: 610 mm For example, punches a 30 mm hole in 15 mm steel Quick-change device Stroke release via foot switch Range of tools is included in the price
Punching force: 500 kN Projection: 610 mm For example, punches a 30 mm hole in 15 mm steel Stroke release via foot switch Range of tools is included in the price
Max. punching force: 500 kN Projection: 610 mm Includes an assortment of stamps and dies Weight: 1700 kg
working pressure: 300 bartotal power requirement: / kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working pressure: 300 bartotal power requirement: / kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Range of tools is included in the price
Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg
Punching force: 250 kN For example, punch a 16 mm hole in 12 mm steel Viewfinder via handwheel Range of tools is included in the price
