Semi-Automatic Roll Rewinder with Automatic Positioning and Manual
Cutting
Year of construction: 2023
Condition: Like new, barely in use
Manufacturer: LIDEM Construcciones Mecánicas S.L., Spain
Inclusive:
Blade Lubrication System, Motorized Sharpener, Film Packaging
System
Description:
Semi-automatic slitter rewinder with a cutting width of 2,000 mm, a
maximum diameter of up to 400 mm and a minimum diameter of 100 mm.
The positioning of the cutting head is automatic, while the lowering
of the cutting head is done manually.
The fastening system of the cutting head allows for high-precision
cutting. System for varying the blade speed to cut all materials.
Details:
- Two guide benches. Displacement guides for the movement of the head.
Cutting head displacement by timing belt.
- A servo motor for the movement of the cutting head timing belt
allows perfect positioning of the cutting head at the highest
speed.
- Two rolls of 165 mm diameter to support the fabric roll. Adjustment
system of the roller set according to the material diameter.
- Lateral supports to avoid longitudinal movements of the roll to be
cut.
2.2 kW geared motor for the cutting blade.
2x0.55 kW geared motors for the rollers. - Cutting head consisting
of:
Built-in control panel.
Sharpening or working selector.
Start/stop button for the blade
Start/stop button for the rollers
Knob to change blade speed.
Touch screen for configuring cutting parameters.
Emergency stop
A 500 mm. diameter blade made of carbon steel with high durability.
Manual sharpener integrated in the cutting head for sharpening the
blade without
disassemble it.
- Cutting activation system via two buttons. When pressing the
corresponding buttons on the joysticks at the same time.
- Complete electrical control panel & control panel.
- Details of safety and security are carefully executed.
- Satin-finished, enamelled polyurethane.
- Working voltage: 220 V, I-phase at 50 Hz.
- Technical manuals available.
EN
Semi-automatic roll cutting machine with the automatic positioning and
manual cutting
Inclusive:
blade lubrication system
motorized sharpener
Film Wrapping System
Condition: like new, hardly used
DETAILED DESCRIPTION OF THE PRODUCT
Semi-automatic roll cutting or slitting machine ROLLER CUT Mod.
CCDSA/2 Ref. VTA5 having a profitable cutting width of 2.000mm, a
maximum diameter of up to 400 mm and minimum diameter of 100mm. The
positioning of the cutting head is automatically done while the
descent of the cutting head is manual.
The best and most representative techniques of the model are: it
allows a high precision cutting due to the fastening system of the
cutting head. Blade speed variation system to cut all king of
materials.
FEATURES
Simplicity and easy to operate.
All the controls are clearly distributed and easy to operate.
Totally protected according to the international security rules.
Designed system for the cutting of rolls into pieces, ribbons and
bias.
Due to the total sturdiness of the machine and the quality of the
components guarantees a perfect cutting of the materials.
High technology and innovation of these models allow us to plan them
with a higher output capacity and a lower consumption.
The system is well suited to any kind of material and guarantees a
precise cut.
Simplicity and easy to operate.
All the controls are clearly distributed and easy to operate.
Totally protected according to the international security rules.
Activation system through two simultaneous joysticks according to the
international safety regulations.
TECHNICAL REQUIREMENTS
Beamedstructure.
Several union beams between the benches. Two guide benches.
Displacement guides for movement of the head.
Cutting head displacement through notched belt.
A servo motor for the movement of the cutting head notched belt, which
allows a perfect positioning of the cutting head together with the
highest speed.
Two rollers of 165 mm diameter, for the support of the fabric roll.
Adjustment system of the rollers set, depending on the diameter of the
material.
System of lateral supports to avoid longitudinal movement of the roll
to be cut.
2.2 kW Geared motor for the cutting blade.
2x0,55 kW Geared motors for the rollers.
Cutting head composed of :
Integratedcontrolpanel.
Sharpening or working selector.
Start/Stop button for the blade
Start/Stop button for the rollers
Blade speed variation regulator.
Touchscreen for the configuration of the cutting parameters.
EmergencyStop
A 500 mm. diameter blade made of carbon steel with high durability.
Manual sharpener incorporated in the cutting head for the sharpening
of the blade without disassembling it.
Cutting activation system by two buttons. When pressing the
corresponding buttons simultaneously on the joysticks.
Completeelectricswitchboard.
Completecontrolpanel.
Details of security and protection carefully executed. Polyurethane
enamelled satin finish.
Working voltage: 220V, I-Phase at 50 Hz.
Technical manuals and for maintenance.
Germany
80935 München 