Squaring saws MÖHRINGER Autojet

wood working machines / saws / Squaring saws

Manufacturer: MÖHRINGER

Model:Autojet

Type of machine: Squaring saws

item-No.: 161197630

Quantity: 0

Date: 19.07.2023

Year of manufacture: 1994

Location: Land-de Germany

Price: basis for negotiations (BN) 65,000 EUR

Machine in stock:No

Seller-item-No.:aso891

Brettbesäumer Autojet used
Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing.

Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007

A cost-effective solution for a fast trimming machine with modern laser measurement.

- Continuous capping with length stops for the cap lengths
- Zero cross-cut saw
- Addition of swivel saw for tip capping on the opposite side.
The waste is disposed of.
-Transverse measuring conveyor
The boards are conveyed by a measurement curtain in transverse passage.
-Laser measurement
State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program.
- Alignment table
A computer calculates the ideal orientation of the board. During the clamping process, the board on the alignment table is moved/aligned at the same time in order to be safely fed to the mulehead from above by means of a feed chain and pressure rollers.
-Edging circular saw
3 variable axes divide the board.
-Spreißel separator
Two jumping splitting wedges (depending on the cutting program) separate the splitters from the board fabric via the spruffle separator.

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

Copy to you?

Save input data

Brettbesäumer Autojet used
Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing.

Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007

A cost-effective solution for a fast trimming machine with modern laser measurement.

- Continuous capping with length stops for the cap lengths
- Zero cross-cut saw
- Addition of swivel saw for tip capping on the opposite side.
The waste is disposed of.
-Transverse measuring conveyor
The boards are conveyed by a measurement curtain in transverse passage.
-Laser measurement
State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program.
- Alignment table
A computer calculates the ideal orientation of the board. During the clamping process, the board on the alignment table is moved/aligned at the same time in order to be safely fed to the mulehead from above by means of a feed chain and pressure rollers.
-Edging circular saw
3 variable axes divide the board.
-Spreißel separator
Two jumping splitting wedges (depending on the cutting program) separate the splitters from the board fabric via the spruffle separator.


seller offer No. resale aso891
can't update statistics 2