Technical data:
Capacities:
Height of centres over the flat way: 625 mm
Height of centres over the flat floor: 1225 mm
Swing over bed: 1250 mm
Swing over carriage: 940 mm
Diameter of four-jaw chuck: 1250 mm
Only range of the chuck min/max: 230/1050 mm
Distance between centres: 5000 mm
Headstock:
Spindle bore: 105 mm
Spindle seat: cyl. 105
Diameter of the spindle in the front bearing: 320 mm
Number of spindle speeds: 24
Overall range of spindle speeds: 1.6-315 rpm
Spindle drive motor rating: 75 kW
Maximum torque of the spindle: 63000 NM
Carriage:
Of the bed width: 1100 mm
Length of the saddle: 1320 mm
Of the cross slide width: 550 mm
Travel of cross slide: 800 mm
Travel of tool slide: 600 mm
Number of feed Council for each range: 20
Overall range of longitudinal feed Council: 0.18-160 mm / rev
Range of longitudinal feed Council at:
-high range of spindle speeds: 0.18-5 mm / rev
-middle range of spindle speeds: 0.18-40 mm / rev
-low range of spindle speeds: 0.72-160 mm / rev
Overall renge of metric threads: 1-192 mm
Overall range of inch threads: 30 - 1/8 tpi
Overall range of mm per min feed Council: 11.2 - 320 mm / min.
Longitudinal rapid traverse: 4000 mm / min
Rapid traverse motor rating: 4 kW
Tailstock:
Diameter of tailstock quill: 280 mm
Diameter of tailstock spindle in front bearing: 170 mm
Seat (taper) of tailstock centre: cyl. 70
Travel of tailstock quill: 200 mm
Rapid traverse of tailstock quill: 300 mm / min
Rapid traverse of tailstock along the bed: 1500 mm / min
Overall dimensions and weight:
Length of the machine: 10700 mm
Width of the lathe: 2200 mm
Height of the lathe: 1930 mm
Load carrying capacity in the chuck while the distance of gravity
centre from the face of the chuck is equal to 350 mm: 4 t
Load carrying capacity between centres
-without steadies 30t
-with one steadt 35 t
-with two steadies 40t
Weight of the machins: 38 t
This machine is in working condition, under power.
Localisation: Rudniki in Poland.
Delivery time: instant
In addition, I would like to inform you that machine which designed
from POREBA as a machine for special application for producing a
barrel type roll for steel plant.
That is the reason why it what equipped by producer with Ness
electrical template.
That electrical template can be easy disassembled.
Poland
