Rollers: 450 mm roller width
200 mm diameter
Cylindrical, smooth surface
Height of the top of the roller to the floor: 1340 mm
Roller temperature control: water-cooled, spray lances in both
chamber-drilled rollers,
Without temperature control unit
Speed: Infinitely adjustable via frequency converter
Adjustable roller: max. 28 / 24 rpm = 17.6 / 15.1 m/min
Fixed roller: max. 34 rpm = 21.3 m/min
Friction: Switchable friction (switchable by lever)
1:1.2 and 1:1.4
Roller bearings: Bronze plain bearings
Bearing Lubrication: Oil Circulation Lubrication
Gap adjustment: Manual manual adjustment by ratchet;
Separate setting for right and left side
Gap Indicator: Mechanical Analog Dial Gauges
Material wiper jaws: Two-piece metal wipers; not foldable
• Strippers move with the adjustable roller when adjusting the
roller gap and are therefore always in contact
Material pan: Stainless steel sheet metal pan below the rollers
Gearbox: FLENDER worm gearbox; i=40; Immersion bath lubrication
Dimensions: approx. 3100 x 1250 x 1600 mm (length x width x height)
Weight: approx. 2800 kg
• Machine stands completely on base frame for ground-level
installation
• Machine has been disassembled, thoroughly cleaned
• Good condition
Germany
