15 offers

Manufacturer:
Manufacturer:
Your found location: Latitude 0.0 + Longitude 0.0
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Manufacturer:
(Category: 108-738)

AEG 1
ARO 5
PEI 2
WMA 1
welding machines / Spot Welding Machines
23.06.2025
item-No.: 162706827

used

Location: Land-de
Price: 1.500 €

current capacity: 80 kVAthroat: 550 mmcontact pressure capacity: 56-516 kptotal power requirement: 149 kVAweight of the machine ca.: 0,8 tdimensions of the machine ca.: 211,5 mNo. 1578Spot welding machine 80 kVA, water-cooled AEG PB 5-3Welding power 80 kVA at 50% EDWorking range: throat depth 550Electrode force 56-516 kpConnected load 149 kVASpace requirement approx. 2 x 1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding machines / Spot Welding Machines
27.08.2025
approved
dealer
item-No.: 162738857
New in: 1971

used

check
Location: Land-de
Price: 2.500 €

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: ARO Type: M 302 Year of Make: 1971 No. 1063655 380 V ~ 50/60 Hz E 100 100 All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

welding machines / Spot Welding Machines
05.10.2026
approved
dealer
item-No.: 162738810

used

check
Location: Land-de

Rated power at 50%ED: 25kVA Short-circuit current: 12kA Electrode force: 120daN / single stroke Projection: 150mm --- Welding Control: AR.01 (5 times, 2 program) --- Incl. additional options: -Foot switch -Main switch - Mounted on aluminium plate --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

welding machines / Spot Welding Machines
13.05.2025
item-No.: 162729886
New in: 1999

used

Location: Land-de

For sale is a used spot welding gun, from the manufacturer ARO. That Spot welding machine is functional and ready for use. In addition, there is an ARO cooling unit. Spot Welding Machine Manufacturer: ARO Year of Make: 1999 Type: RXA9114C30705M Connection voltage: 500V Control voltage: 24DC Weight: 85 KG Dimensions (L x W x H): 1200 x 800 1450 cm Refrigeration unit: Manufacturer: ARO Type: VWK 50/1-S Year of Make: 1999 Cooling capacity: 5820 W Ambient temperature max.: +32 °C Permissible operating overpressure: 25.0 bar Refrigerant: R 22 Voltage: 3/PE - 400 V Frequency: 50 Hz Connected load: 3.8 kW Weight: 152 kg Weight with water filling: 242 kg Dimensions (L x W x H): 800 x 700 x 1450 cm

welding machines / Spot Welding Machines
05.10.2026
approved
dealer
item-No.: 162738811

used

check
Location: Land-de

Spot welding gun --- Rated power at 50%ED: 22kVA Short circuit current: 17kA Electrode force: 360daN / single stroke Projection: 95mm --- - Electrode arm AE/2/96g + C34/2/63g --- Welding control: on request --- Spring balancer on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

welding machines / Spot Welding Machines
27.02.2025
item-No.: 162719830
New in: 1999

used

Location: Land-de

Offer 19013 Specifications: - Rated power at 50% ED 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Weld values sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm spacing 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water volume approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Hanging bracket with gimbal

welding machines / Spot Welding Machines
30.10.2026
approved
dealer
item-No.: 162754901
New in: 1989

used

check
Location: Land-de

Offer 24014 Technical data: - Rated power at 50% ED 40 kVA - Max welding power 118 kVA - Adjustable projection 225 - 550 mm - Welding values - sheet steel 4 + 4 mm - Brass sheet 2 + 2 mm - Aluminium sheet 1 + 1 mm - Electrode force adjustable 65 - 390 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Control for: Retention time; Current time; - Holding + holding time, and - Pulse + pause time - Drive 380 V - Space requirement approx. W 600 x H 1350 x D 1550 mm - Weight approx. 330 kg - with: - complete electrical + pneumatic equipment - 6-time synchronous control MPS 1036 - Foot switch

welding machines / Spot Welding Machines
05.10.2026
approved
dealer
item-No.: 162738809

used

check
Location: Land-de

Rated power at 50%ED: 63kVA Short-circuit current: 26.3kA Electrode force: 65-390daN / single stroke Throat: 450-750mm --- Welding control: MPS 15036 (5 times, 1 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

welding machines / Spot Welding Machines
14.09.2026
approved
dealer
item-No.: 162751994

used

check
Location: Land-de
Price: 4.115 €

DALEX PMS 10-4 & COHLINE Water Chiller DALEX, type PMS 10-4 powerful and robust industrial spot welding machine in a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition: Extremely low mileage: The built-in DALEX MPS 100 digital control system shows an original odometer reading of only 13,282 cycles! For an industrial machine of this caliber, this is as good as new and guarantees minimal wear and tear. High electrode force: This model offers a powerful contact pressure of up to 690 daN for perfect spot welds even on thicker sheets. Including cooling: Thanks to the powerful COHLINE cooling unit (5.8 kW), the machine is immediately ready for permanent industrial shift operation without overheating. Flexibility & Safety: Equipped with a key switch for easy choice between control by footswitch or the two-hand safety console. Technical  ...

welding machines / Spot Welding Machines
05.10.2026
approved
dealer
item-No.: 162746170

used

check
Location: Land-de

Rated power at 50%ED: 16kVA Short-circuit current: 20.7kA Electrode force: 65-390daN / single stroke Throat: 200mm --- Welding control: MPS 10beta (5 times, 8 program) --- Incl. additional options: - Footswitch - Transformer tap changer 8-way + main switch - Machine table --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

welding machines / Spot Welding Machines
08.07.2026
approved
dealer
item-No.: 162737321
New in: 1995

used

check
Location: Land-de

Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW

welding machines / Spot Welding Machines
23.06.2025
item-No.: 162728983
New in: 1992

used


current capacity: kVAthroat: mmcontact pressure capacity: kpvolume capacity: Punching capacity: kNpunching cross-cut in cmm: stroke: mmweight of the machine ca.: 170 kgdimensions: 1200 x 900 x 1350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding machines / Spot Welding Machines
23.06.2025
item-No.: 162706834
New in: 1990

used


current capacity: - kVAthroat: - mmcontact pressure capacity: - kptotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mNo. 1244CNC portal spot welding machine PEI PROG-2515Working area: 2500 x 1500Siemens controlWelding capacity of the butt spot welder 3+3 mmWelding capacity of the gun 2+2 mmFeed rates: X+Y 800 mm/sec, Z: 400 mm/sec, A 120°/sec.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding machines / Spot Welding Machines
23.05.2025
item-No.: 162712060

used

Location: Land-fr

Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

welding machines / Spot Welding Machines
28.07.2026
item-No.: 162749706

used

Location: Land-de
Price: 750 €

Zinser P10F Spot Welder / Resistance Welding Machine For sale is a robust spot welder of the Zinser brand, type P10F. The machine comes from industrial use and convinces with its solid construction and proven, durable technology. Ideally suited for workshops, metal construction, sheet metal processing, repair work and use in production. Technical data: • Manufacturer: ZINSER • Type: P10F • Type: Spot welding machine / resistance welding machine • Design: stationary industrial construction • Power supply: [please add nameplate] • Power: [please add nameplate] • Year of manufacture: [add if known] Equipment: • Robust mechanical design • Adjustable welding performance • Suitable for various sheet metal and steel joints • Durable industrial technology • Solid construction for daily workshop use Condition: The machine is in a used cond ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE since 1996