CNC Wood Milling Machine 6KW 1300x2500
CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500
◼Invest in the quality of the INDUSTRY 2.0 Series
The INDUSTRY 2.0 series differs from the standard series by using the
best and most precise motors in its class and the power transmission,
which significantly increase the machining capabilities of the
machine, making it the most industrialized series in this price
range.
◼The INDUSTRY 2.0 series CNC milling plotter with a working surface
of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with
an electrospindle with a power of 6kW and 24000 rpm. on a ceramic
bearing. The working table of the machine is made in hybrid technology
- it has vacuum sections and subsections for automatic, non-invasive
clamping of the processed material, as well as T-Groove slots for
manual clamping.
◾Hybrid table, i.e. vacuum, enabling non-invasive fixation of the
element, leaving the possibility of manual clamping of irregular
shapes
◾The frame of the machine is fully welded, annealed and milled,
which ensures the accuracy of machining and stability of work
◾Machine control with NK-105 DSP controller
◾Tool height sensor included
◾Central oil lubrication system for carriages and slides as
standard
◾The power transmission is carried out via a reducer
◾The machine in all axes (X, Y, Z) moves on high-quality guides and
PMI 25mm linear bearings
◾LEADSHINE Easyservo dual servo drive on Y-axis
◾Wiring the machine with high-end fire wires.
◾The electrical wires used in the construction of the milling
machine are adapted to bending and are protected against
deformation
◼ Specifications:
◾Manufacturer: TechnologieCNC
◾Model: 1325 INDUSTRY 2.0
◾Electrospindle: 6kW, 24000rpm on a full ceramic bearing
◾Max. speed in slow travel: up to 33m/min
◾Max. working speed in the material: up to 25m/min
◾Software resolution: 0.01mm
◾Mechanical resolution: 0.04mm
◾Working surface X/Y/Z: 1300x2500x300mm - Hybrid table
(vacuum+T-Groove ◾)
◾Control: NK-105 controller
Czvax2mw2a
◾Achieving high working speeds and machining stability is guaranteed
by the Leadshine EASY-SERVO servo drives ◾with encoder used in the
machine and the transmission of the drive through the SHIMPO planetary
reducer
◾Software: CAD/CAM standard: Artcam Open 2016
◾Power supply: 3PH, 400V, 50-60Hz
◾Maximum security
◾As standard, the machine is equipped with professional protective
light barriers of protection class 4.
◾Light sensors mark the safe zone and prevent intrusion into the
machine's work zone.
◾A set of barriers as standard with the machine provides protection
for the operator's station on one side.
◾The number of pages necessary for protection depends on the
location of the machine.
◼ Control: NK-105 controller
The NK105 G3 is one of the easiest to use controls for beginners and
advanced users.
control of the working speed, adjustment of the spindle speed
connected to the inverter and many other functions.
Poland
66-40 Gorzów Wielkopolski 