The INDUSTRY 2.0 series CNC milling plotter with a working surface of
1200x1200mm and a clearance in the Z axis equal to 300mm is equipped
with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic
bearing. The working table of the machine is made in hybrid technology
- it has vacuum sections and subsections for automatic, non-invasive
clamping of the processed material, as well as T-Groove slots for
manual clamping.
Standard equipment
Hybrid table, i.e. vacuum, enabling non-invasive
fastening of the element, leaving the possibility of fastening
Manual irregular shapes
The frame of the machine is fully welded, stress relieved and then
milled,
which ensures the machining accuracy and stability of the operation
Machine control with the NK-105 G2 DSP controller
Tool height sensor included
Central oil lubrication system for carriages and guides
Optional as standard
The power transmission is carried out via a reducer
The machine in all axes (X, Y, Z) moves at a high
Linear guide rails and PMI 25mm
LEADSHINE Easyservo dual servo drive on Y-axis
Wiring the machine with high-end fire wires.
The electrical wires used in the construction of the milling machine
are adapted to
bending and are protected against deformation
Specifications:
Manufacturer: TechnologieCNC
Model: 1212 INDUSTRY 2.0
Electrospindle: 6kW, 24000rpm on a full ceramic bearing
Max. speed in slow travel: up to 33m/min
Max. working speed in material: up to 25m/min
Software resolution: 0.01mm
Mechanical resolution: 0.04mm
Working surface X/Y/Z: 1200x1200x300mm - Hybrid table
(vacuum+T-Groove)
Control: NK-105 G2 controller
Achieving high working speeds and machining stability is guaranteed by
the Leadshine EASY-SERVO servo drives with encoder used in the machine
and the transmission of the drive through the SHIMPO planetary
reducer
Software: CAD/CAM standard: Artcam Open 2016
Power supply: 3PH, 400V, 50-60Hz
Control: NK-105 G2 controller
The NK-105 G2 is one of the easiest to use controls for beginners and
advanced users.
control of the working speed, adjustment of the spindle speed
connected to the inverter and many other functions.
Poland
66-40 Gorzów Wielkopolski 