Alexander von Westernhagen Column slewing crane, Abus, 125kg, radius 5m – used - : Price from location: 3.250.-€ (net), dismantled and loaded! Manufacturer: Abus Type: LSX 36 Year of Make: 2017 Load capacity: 125kg Throat: 5,000mm Crane classification: H2/B2 Boom lower edge height: 2,770m Total height: approx. 3.06m Corridor operation via push-button button Control: electric Voltage: 400 Swivelling: by hand Weight column: approx. 212kg Boom weight: approx. 106kg Weight trolley: approx. 26kg Original price approx. 5.000.-€ Condition: good – very good Available: immediately Location: 96126 Maroldsweisach
Mieth Maschinenhandel Offer 17223 Specifications: - E. Chain hoist ABUS GM 2 Bj.18 , operation via corridor remote switch - Load capacity 500 kg - 2 lifting speeds approx. 4 + 1.0 m/min - Projection 3000 mm - Hook height approx. 2550 mm - Lower edge of boom approx. 2950 mm - Total height approx. 3500 mm - Column dimensions approx. 300 x 300 mm - Footplate dimensions approx. 450 x 450 mm - Swivel radius 270 ° - Drive 400 V - Total weight approx. 550 kg
Hermann Träxler GmbH 5t load capacity, track width 14,200 mm. Well preserved. Without warranty. Crane can be loaded on open truck freely.
FORMEX SK s.r.o. New chain hoist with warranty Year 2013 Stroke 1/4 m/min complete with underlays, landing gear, etc.
arm length: 2500 mm total column height: 3100 mmm weight max. in kg: 125 kg swivelling range: 180 Grad Electric 380 Volt: Hnad control: We have no documentation of this crane so we sell with a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: ca. 1988 arm length: 2000 mm weight max. in kg: max. 1000 kg height of hook: max. 2000 mm WITHOUT LIFTING DEVICE: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mach4metal Lifting capacity: 48000 kg Hoist height: 10000 mm Span length: 19600 mm Type: ZLK Overhead travelling craneABUS - ZLK Remote control Very little used Span: 19600mm Lift height: 10000mm Capacity Kg: 48000 Lifting speed:0,7 / 4,0 M/Min
Mach4metal Lifting capacity: 6300 kg Hoist height: 6000 mm Span length: 17252 mm Type: Overhead Crane Make Abus 6.3 ton Type ELV Year 2003enkelligger bovenlloop kraan length (mm)Span = 17.252 Height = 6.000 Cap = 6.300 kg Weight 5.015 Kg Lift = 0.8 - 5 M/min Hoist = 5/20M/min Number APC.Drive = 10/40 M/min Free in Okt 2015
Mach4metal Lifting capacity: 1000 kg Hoist height: 5000 mm Span length: 4500 mm Type: vs Overhead travelling craneABUS - VS MACH-ID 8789 Make: ABUS Type: VS Year: 2019 Span: 4500mm Lift height: 5000mm Capacity Kg: 1000 Lifting speed:5 Hoist trolley:5 Length: 5000mm Width: 1000mm Height: 5000mm Weight: 2500kg
Innovac GmbH Three identical Abus overhead traveling cranes are available. Load capacity: 2000kg. Documentation available. On-site inspection is possible.
lifting capacity :0,25 t lift:2500 mm span width:3000 mm total power requirement:3 kW weight of the machine ca.:1,0 t - motorized sviwable arm - floor control panel - test book available.
lifting capacity :1 t lift:4500 mm span width:4500 mm total power requirement:3 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:5,5 x 1,2 x 5,0 m - motorized swivel - floor control panel - test book available
Crane remote control, control switch, hand control, with connection cable ABUS HT 211-S ( HT211-S ) 2x selector button, two-stage 1x emergency stop plastic housing max. 500 V IP65 Connection cable: Length: approx. 1.8 m New ! Dimensions ( without cable ): 340 x 80 x 110 mm Dimensions ( Package ): 350 x 150 x 120 mm
Rope guide for crane, wire rope hoist ABUS Type 175 - 800.5 compact Item No. 45237 (AN7345) Spare part for the repair of the rope guide on an ABUS wire rope hoist suitable for Abus hoist GM 800.6 Technical data Outer diameter: approx. 175 mm Inner diameter: approx. 210 mm Width: approx. 50 mm Net weight: 0.60 kg New - unused from stock liquidation; used