We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Bürkle glue application machine Type DAK 1300 Built in 1993 4 Roller Glue Dispensing Machine Machine for single and double-sided glue application Effective working width 1300 mm Roller length 1400 mm Frequency-controlled drive 6-30 m/min Motorized height adjustment via push button Passage height up to 80 mm 2 fluted application rollers diameter 240 mm 2 dosing rollers diameter 190 mm Rubber coating of the rollers in good condition With flushing device Nominal power 2.1 kW Dimensions approx. 2600 mm x 1900 mm Weight 1700 kg
L. 2500 x B. 1300 Bürkle Veneer press 6 Column Cylinder 98 tons of pressure Heating plates Safety line Immediately available
1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm
- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images
I am selling a heating air drying tunnel BURKLE Model: Easy Dry JET 1300 Filter: TRDUE / 700 m3/h Fan 7,5kW / 6800m3/h / 35 m/s Working width 1400mm Overall length 6.00m Electrical connection 36.5kW Heating air system 12 bladder units Heating medium water up to 80°C Max. heating capacity 45 kW Max. temperature of heating surfaces 120°C Siemens Simatic Touch Control Panel Year of construction 2014. System NEW, already not used ! Available soon.
Bürkle Multifoiler Model BTF 1628/60 Year 1997 Plant for coating smooth and formed MDV parts with thermoplastic films, of roll or as a cut, for film PVC,PP,high gloss PVC,ABS. Suitable for thermoforming or membrane process. Max part size 1250x 2550 mm/ Divide thickness 6-35 mm Hot plate dimensions 1600 x 2800 mm max heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw Weight 16,5 t
Two identical Bürkle veneer presses are available. Press area: 1200mm/2500mm. Stages: 1. piston: 6. piston stroke: 450mm. Total pressing force: 16t. Machine dimensions X/Y/Z: approx. 3250mm/1350mm/1950mm. Weight: approx. 2500kg. On-site inspection is possible.
Usefull width: 1300 mm Panel thickness: 3 - 80 mm Panel feed by carpet, variable feedspeed 6-30 m/min Coating roller 55° Shore with variable speed and scraper Chrome doctor roller with variable speed and scraper Machine length in the line: 1000 mm
Usefull width: 1300 mm Panel thickness: 3 - 80 mm Panel feed by carpet, variable feedspeed 6-30 m/min Coating roller 55° Shore with variable speed and scraper Chrome doctor roller with variable speed and scraper Machine length in the line: 1000 mm
Working width: 1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece width min./max.: 10mm/1300mm, max. workpiece length: 100mm, workpiece height min./max.: 3mm/120mm, roller application speed: 5m-30m/min, feed: 6m-30m/min. Documentation available. On-site inspection is possible.
Manufacturer: IST, Type: UV Trockner, Year: 11.97, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 3, kW power 1 lamp: 10, kW power all lamps: 30, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.97
Manufacturer: IST , Type: UV Trockner, Year: 11.1997, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 1, kW power 1 lamp: 10, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.1997
Manufacturer: Bürkle, Type: EFA 1300, Year: ca.1990, PVAC-Dispersions-Folienkleber: yes, Work piece length min-max mm: 500-3200, Work piece width min-max mm: 200-1300, Work piece thickness min-max mm: 3-60, Kaschiergeschwindigkeit: 25, Doppelseitig Folienauftrag: yes, Folienrollenmagazin: 1, Feeding speed continous adjustable: yes, Inlet conveyor: yes, Querreinigungsbürste: yes, Bürstmaschine längs: yes, Plattenvorwärmzone: no, Kleberauftragmaschine : yes, Abwickeleinheit: yes, Prägekalander: yes, Leimfilteranlage LFA: yes, Intermediate transport mm: 3000, Year :ca.1990
Manufacturer: Bürkle, Type: EFA 800, Year: 1984, Working width mm: 600, Veneer thickness min mm: 0,15, Veneer thickness max. min: 0,7, Feeding speed max m/min: 8 - 35, Feeding speed continous adjustable: yes, Year :1984
Manufacturer: Bürkle Ersatzlackwalze 30 shore 1300 mm 80 Gang gerillt Neu<CRLF>Type: Lack-Ersatzwalzen, Spare roller: DAL/SAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1420, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: 80 Gang/gerillt,
Manufacturer: Bürkle Lackauftragswalze 1416 mm ca 25 mm Gummi shore ca 25 Ersatzwalze Neu, Spare roller: SAL/SLC/DAL, Bürkle: yes, Roller rubber coating: 238, Rubber coating length cm: 1415, Shore Härte: ca.25, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: walze ist gelasert, Wedge follower: yes, Rubber coating defective: neu,
Manufacturer: Bürkle Lackwalze 1416 mm 30 shore 25 Gummi<CRLF>Gerillt , Roller rubber coating: gerillt, Rubber coating length cm: 1416, Shore Härte: 30,
Manufacturer: Bürkle UV Trockner, Type: UV Modul, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Number of lamps: 1, kW power 1 lamp: 80 W/cm, Lampen gerade eingebaut: yes, Adjustable: no, Position of lamps: gerade, Conveyor lenght mm: 5000, Chain pitch mm: 76, Drive power kW: 1,1, Working height in mm: 950 +/-, Through running hight mm: 3-80, Feedin speed m/min: 5-25, Rod transportation: yes, Year :2001
Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 35-40, Approx. thickness of rubber coating in mm: 15, Stahlkerndurchmesser ca. mm: 200, Diameter of neck: 40, Total lenght mm: 1970, Rubber coating defective: no,
Manufacturer: Bürkle Zentrierollengang, Year: 2002, Control: no, Working length mm: 4500, Working widht mm: 1400, Engine power kW: 0,75, Durchmesser Rolle mm: 75, Rollenmittenabstand: ca.200 mm, angetrieben über Flachriemen: yes, Stop straightedge: yes, Pneumatically controlled: yes, Anschlaglineal verstellbar: yes, Anschlagkante Höhenverstellbar: no, Freilaufrollen: no, Year :2002
Manufacturer: Bürkle Transportband ohne UV Einheit, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: 11, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2500, Lamps straight installation: yes, Conveyor: 6-30,
Manufacturer: Bürkle, Type: Bürste, Working widht max mm: 1300, Diameter of brushes: 150,
Manufacturer: Bürkle, Type: Wellenträge Ersatzbürste, Year: ca.1998, FREETEXT1: Träger für Beizvertreiber Maschine, FREETEXT2: mit Schnellspan möglichkeit, Year :ca.1998
Manufacturer: Bürkle Lackersatzwalze 1416 45 shore, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 194, Diameter of neck: 38,
Manufacturer: Bürkle, Type: UV Transportband, Year: 2001, Work piece width min-max mm: 1350, Lampen gerade eingebaut: 1, Conveyor lenght mm: 5000, Drive power kW: 1,1, Year :2001
Manufacturer: Wild, Type: Abstapelautomat, Year: 2001, Control: Bürkle, Work piece width min-max mm: 500-1250, Min.-max. workpiece length in mm: 500-3000, Min.-max. workpiece height in mm: 3-25, Vacuum feeding: yes, Longitudinal feeding: yes, Stacking pattern, double-row: mehrspurig, Stack height in mm: 1000, Cycles approx.: 6, Removal of protective boards: yes, Erection in a pit: no, Drain roller operation: yes, Year :2001
Manufacturer: Bürkle Gegendruckwalze 1300 mm 8 mm Gummi shore 80 muss geschliffen werden, Bürkle: JA, Roller rubber coating: yes, Rubber coating length cm: 1300, Shore Härte: ca.80, Stahlkerndurchmesser ca. mm: ca.170,
Manufacturer: Bürkle SLC Dosierwalze 1416 mm Neu 174 Durcmesser mm Beheizbar, Spare roller: Dosierwalze, Bürkle: Neu, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416 mm, : SLC, : 174, : Chrom,