CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Regulation: - 32 bit controller - LCD control panel - Digital display of target and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test object control Technical performance data Temperature checks: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K temporally Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat irradiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, a ...
CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water-cooled Type series: CTS T-30/920/S Test room volume: 920 liters Test room dimensions: D x W x H 820 x 850 x 1340 mm Overall dimensions: D x W x H 1870 x 1200 x 2400 mm Temperature working range: Temperature range -30(Tested to -35) to +180°C Heating speed: 2.5 K/min Cooling speed: 2.8 K/min Electrical connection 400 V 3/N, 50 Hz Rated power: approx. 7.3kW Rated current: approx. 12.5 A Refrigerant: R404A Weight: 770 Kg Type: T-30/920/S For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful verification, the chambers are subjected to a test run, which is monitored with cal ...
CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...
