used DAEWOO for sale

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 32i- Model A Main spindle nose: ASA 11 Main spindle power: 30Kw Main spindle self-centering diameter: 380mm Main spindle bar passage: 117mm Turning diameter: 560mm Turning length: 2155mm Main spindle speed: 2000 Mechanical range change: yes Number of ranges : 2 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret tool attachment type: BMT 75 First turret X-axis travel: 357mm First turret Z-axis travel: 2155mm Fast feeds linear axes X Y Z: 20m/min Tailstock: yes Chip conveyor: belt Presetting: yes Self-centering bezel: yes Brand and model self-centering bezel: morari MG 1400 Min diameter - Max diameter: 50 - 450mm Machine equipment: the machine is equipped with two additional chucks t ...

DAEWOO LYNX 200B LATHE with FANUC control system

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 18-T Main spindle nose: ASA 11 Main spindle power: 37Kw Main spindle self-centering diameter: 450mm Main spindle bar passage: 117.5mm Turning diameter: 650mm Turning length: 1575mm Number of tool turrets: 1 Number of fixed tool positions for the first turret: 12 First turret X-axis travel: 370mm First turret Z-axis travel: 1575mm Tailstock: yes Steerer stroke: 150mm Chip conveyor: belt :::D DIMENSIONS AND WEIGHT::: Length: 4930mm Width: 2460mm Height: 2587mm Weight: 13690Kg

HORIZONTAL LATHE DAEWOO PUMA TT1800SY :::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iTB - Main Spindle Nose: ASA 6 - Main Spindle Power: 22.4Kw Main spindle bar passage: 65mm - Turning diameter: 230mm - Turning length: 980mm - Main spindle speed: 5000 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 165mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 700mm Second turret X-axis travel: 190mm Second turret Z-axis travel: 720mm Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 5000 Counter spindle power: 22Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Machine equipment: device for unloading long pieces Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIG ...

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

Rated Power: 7.5kVA Maximum power: 8.1kVA Voltage: 400 / 230 V Frequency: 50 Hz Tank capacity: 15 l Engine power: 11 / 15 KW / hp Machine weight approx.: 165 kg Approx. dimension: 0.88 x 0.56 x 0.76 m Diesel generator with: - electric start. - Equipped with automatic voltage regulator. -Air-cooled -Mobile. - Low oil level alarm with autostop function.

Power: 7,5 KW Receiver: 500 L feed pressure: 14 bar liter capacity: 995 l connected load frequency: 400 V weight of the machine ca.: 200 kg dimensions of the machine ca.: 2,0 x 0,7 x ,125 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 580 mm Turning length: 100 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc CNC Model: O T Make Daewoo 315 L Type 315 L ECOTURN Year1995 Fanuc OT CNC turning lathe daewoo ecoturn 315 L Centre height (mm)Swing = 580 Center distance (mm)DBC = 1.000 Spindle bore Turret = 10 Pos Chip conveyor Kitagawa 315 mm  

Table length: 7000 mm Table width: 1200 mm Longitudinal X: 7000 mm Cross Y: 2000 mm Vertical Z: 600 mm CNC Brand: Fanuc CNC Model: 16 iMB Make HNK Daewoo Type HKDB 130 P Year 2000 Fanuc 16 iMB Spindle diameter (mm) 130/26/2500 Table length (mm)  L = 7.000 Table width (mm) W = 1.200 Longitudinal X (mm) X = 7.000 Cross Y (mm) Y = 2.000 Pos ATC Z = 600 Number APC. Duplex borer 2 x Chain ATC 60 Pos. 2 x pallet 7000 x 1200 2 x chip conveyor  

Center height: 0 mm Center distance: 770 mm Spindle bore: 77 mm Make Puma 10 S CNC Type DAEWOO PUMA 10 S Year 90 er FANUC O - T daewoo puma cnc lathe draaibank Centre height (mm) Swing = 580 Center distance (mm) DBC = 770 Spindle boreBore = 77 Turret 10 Positions Speeds 2500 Rpm Rapid 10.000 mm/Min  

Daewoo X: 1250 - Y: 1000 - Z: 1000 mm CNC X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Control: Fanuc OM Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency : 20 -> 4500 rpm Number of pallets : 2x Power principal motor: 70 kva Length: 4100 mm Depth: 6850 mm Height: 3240 mm Weight: 18 ton ACCESSORIES: yes Cooling-system: yes

This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle speeds up to 5000 rpm and includes a tool turret with 12 stations. Consider the opportunity to buy this DAEWOO PUMA TT 2000 SY horizontal turning machine. Contact us for more information about this machine.

This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, its ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine.

This 4-Axis Daewoo ACE-HP 4000 horizontal machining centre was manufactured in 2006, controlled by a FANUC Series 18i-MB system. It features comprehensive travel dimensions: 600mm in X, 560mm in Y, and 565mm in Z, along with table rotation capability. The machine is equipped with spindle cooling, a chip conveyor, and external workpiece cooling, ensuring optimal operation. A robust choice for precision machining, it combines extensive operating hours with dependable performance. Reach out for further details regarding this horizontal machining centre.

This DAEWOO Lynx 210B was manufactured in 2004. A robust horizontal turning machine featuring a spindle speed of up to 5000 rpm and motor power of 11 Kw. It supports a maximum turning diameter of 280 mm and a length of 305 mm. Equipped with a 12-position turret and useful accessories like a chip conveyor and tool presetting. If you are looking to get high quality turning capabilities consider the DAEWOO Lynx 210B machine we have for sale. Contact us for more information.

This DAEWOO PUMA 250 M was manufactured in 1998. A lathe equipped with a FANUC 18-TB CNC, featuring a turning diameter of 355 mm and a length of 655 mm. It includes a 12-position automatic turret with driven tools, tailstock, and a bar loader LNS QUICK LOAD. Suitable for efficient and precise turning operations. Reach out for more information about this lathe.

This DAEWOO PUMA 400 LA was manufactured in 2002. A lathe equipped with a FANUC Series 18i-T CNC, featuring a bar capacity of 90 mm and a Z-axis travel of 2200 mm. It includes a 12-position automatic turret, tailstock, and a conveyor. Suitable for diverse turning applications. Reach out for more information about this lathe.