used DOOSAN for sale

Doosan PUMA 2600SY - 6-axis CNC turning center - Center width: 760 mm - Circumference Ø: 780 mm - Spindle bore: 86 mm - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 Bar Feeder - Year of construction 2011 Specifications Capacity: - Circumferential Ø over bed: 780 mm - Circumferential Ø over slide: 630 mm - Rec. Rotary Ø: 255 mm - Max. rotary Ø: 376 mm - Max. turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed belt type: 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing Ø: 140 mm - Spindle passage Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Sub-spindle speed (integrated): 6000 rpm - Sub-spindle nose: ASA A2-5 - Front counter-spindle bearing Ø: 90 mm - Sub-spindle passage Ø: 62 mm - Min. counter-spindle indexing angle (C-axis): 0.001° Tool turret: - Number of tool stations: 12 - Tool outer Ø:  ...

DOOSAN DNM 4500 CNC machining center was built in 2022 (purchased as new in 2023) in South Korea by DN SOLUTIONS. The machine, designed for precision machining of workpieces with a maximum weight of 600 kg, is equipped with a number of reliable components that ensure uninterrupted operation for many years of intensive production. The machining processes, i.e. drilling, threading and milling, are performed inside a large work area by means of cutting tools and a powerful spindle with direct drive. All this is complemented by the intelligent SIEMENS CNC controller, in which advanced machining programmes are created in just a few steps. Throughout its entire service life, the machine has worked for just 83 hours. The DOOSAN milling center weighs 5000 kg. Technical specifications of the DOOSAN DNM 4500 CNC milling machine - CNC controller: SIEMENS SINUMERIK 828D - feed in the X/Y/Z axis ...

Inv. Num. : 7971 Type: Lynx 2100 LYB Producer: Doosan Created: 2022 Parameters: Control system: Siemens Sinumerik 828D Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum length of travel in the X-axis: 205 mm Maximum length of travel in the Y-axis: 105 mm Maximum feed in the Z-axis: 560 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Length: 2880 mm Width: 1711 mm Height: 1921 mm Weight: 3900 kg

Inv. Num. : 8144 Type: LYNX 220 LSYA Producer: DOOSAN Created: 2014 Parameters: Control system: Fanuc iSeries Max. turning diameter: 525 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Maximum main spindle power: 15 kW Axis X: 205 mm Axis Z: 560 mm Axis Y: 105 mm Weight: 4150 kg Equipment: Sub-spindle

Inv. Num. : 8094 Type:- Producer: Doosan Created: 2023 Parameters: Maximum load capacity: 25 kg Inclination: 2700 mm Working Range: 360

DoosanPuma 3100LM serial number ML0117-000145 turning 600 mm number of tool changer stations 12 coolant pump yes chip conveyor yes CNC control, brand, type Siemens sinumerik 828D dimension L 5300 mm dimension W 2100 mm dimension H 3200 mm

Max Turning Diameter: 21.7 Max Turning Length: 38.5 Max Swing: 30.3 X Axis Travel: 14.3 Z Axis Travel: 43.5 Spindle Speed: 2,000 RPM Spindle Motor: 50 HP Bar Capacity: 4.5 Spindle Bore: 5.51 Milling Motor RPM: 3,000 RPM Milling Motor HP: 15 H.P. Turret Stations: 12 Stations (All Live) EQUIPPED WITH: Fanuc Oi-TD CNC Control Live Tooling Programmable Tailstock Tool Setter Steady Rest Bracket: NO STEADY REST 145 PSI Hi Pressure Coolant LNS Heavy Duty Chip Conveyor PCMCIA Interface Foot Pedal Actuator Chuck & Tailstock MICROIL® ™ Mist Collector 18 AUTOBLOK BB-N-400-140 BIG BORE AIR Dimensions: 215 x 99 x 90 Weight: 21,380 LBS Options: Fanuc 0i-T Chip Conveyor Tool Presetter Tailstock Live Tooling 18 Autoblok Model BB-N-400 Big Bore Air Chuck Microil™ Mist Collector 145 PSI High Pressure Coolant ONLY 3,700 SPINDLE HOURS

SPECIFICATIONS: Chuck Size... 6 Max Diameter Bar Capacity.. 2 Max Swing Over Bed / Carriage... 23.2 / 6.7 Max Turning Diameter (Max / Std)... 9.84 / 6.7 Max Machining Length. 20.1 Main Motor... 20 / 15 HP Tools 12 / 24 Spindle Speed. 60 - 6000 RPM Spindle Bore 2.4 Milling Motor 5 HP Milling Speed.. 6000 RPM Rapid Traverse Rates (X / Z).. 1181 / 1417 IPM X-Axis Travel 17.7 Z-Axis Travel ...13 C-Axis Index... .001 Degrees Turret Index (Single Step). 0.15 Seconds Tailstock Taper.. MT#4 Machine Dimensions (L x W x H) 144 x 63 x 65 Machine Weight 7275 lbs. FEATURES: FANUC i Series 10.4 Color LCD PC / MCIA Interface C-Axis Milling Capability 6 Samchully MH-206 Hydraulic Chuck Auto Parts Catcher Tool Presetter Tailstock with Programmable Quill Chip Conveyor

Less than 300 hours, It is equipped with 12″ Chuck, Tool Presetter, Tailstock ,Chip Conveyor. On Our Floor fully powered / tested & is in Great working condition.” Doosan Puma 300LC Equipped With: Fanuc i series CNC Control Box way construction Rigid Tapping 12″ 3 Jaw Hydraulic Chuck A2-11 Spindle Auto Tool Presetter Hydraulic Programmable Tailstock and Quill PCMCIA Card Slot Coolant System Barfeed Interface 12 Station Automatic Turret Foot Switch Turbo Chip Conveyor General: Power: 45 kva, 220v / 3-Phase Overall Dimensions: 150″ x 77″ x 80″ High Overall Dimensions: 168″ x 77″ x 80″ High with Chip Conveyor Weight: 15000 lbs Doosan Puma 300LC Specifications: Capacity: Max Turning Diameter: 15.7″ Max Turning Length: 50.4″ Max Bar Capacity: 4.05″ Swing Over Bed: 22.4″ Distance Between Centers: 52.8″ X Axis Travel: 11.1″ Z Axis Travel ...

SWING OVER BED.. 30.3 SWING OVER SADDLE... 23.2 MAXIMUM TURNING LENGTH.. 41 SPINDLE BORE / BAR WORKING DIAMETER. 5.2 / 4.6 SPINDLE SPEED... TO 2,000 RPM SPINDLE NOSE A2 #11 RAPID TRAVERSE (X/Z AXIS)... 630/790 IPM MAXIMUM CUTTING FEEDRATE 19.7 IPR TURRET.. 12 POSITIONS TAILSTOCK QUILL DIAMETER 4.7 QUILL TRAVEL 4.7 MAIN SPINDLE MOTOR.. 50 HP MACHINE DIMENSIONS... 166 X 86 X 89 TALL MACHINE WEIGHT... 21,600 LBS EQUIPPED WITH: FANUC 21ITB CNC CONTROL 2 SPEED GEARED HEAD PROGRAMMABLE TAILSTOCK 18 & 15 3-JAW HYDRAULIC CHUCK CHIP CONVEYOR

SWING OVER BED.. 30.3 SWING OVER SADDLE... 23.2 MAXIMUM TURNING LENGTH.. 41 SPINDLE BORE / BAR WORKING DIAMETER. 5.2 / 4.6 SPINDLE SPEED... TO 2,000 RPM SPINDLE NOSE A2 #11 RAPID TRAVERSE (X/Z AXIS)... 630/790 IPM MAXIMUM CUTTING FEEDRATE 19.7 IPR TURRET.. 12 POSITIONS TAILSTOCK QUILL DIAMETER 4.7 QUILL TRAVEL 4.7 MAIN SPINDLE MOTOR.. 50 HP MACHINE DIMENSIONS... 166 X 86 X 89 TALL MACHINE WEIGHT... 21,600 LBS EQUIPPED WITH: FANUC 21ITB CNC CONTROL 2 SPEED GEARED HEAD PROGRAMMABLE TAILSTOCK 18 & 15 3-JAW HYDRAULIC CHUCK CHIP CONVEYOR

Dimensions: - Length: 2311.4 mm - Width: 1600.0 mm - Height: 1655.0 mm - Weight: 2900.0 kg Turning Specifications: - Turning Length: 305.0 mm - Turning Diameter: 320.0 mm - Diameter Above the Bed: 510.0 mm - Diameter Above Transversing Slide: 290.0 mm - Length Between Centers: 23.0 mm Axis Movement: - X-axis Travel: 175.0 mm - Z-axis Travel: 330.0 mm Workpiece Capacity: - Maximum Workpiece Weight: 130.0 kg Spindle Details: - Spindle Bore: 53.3 mm - Spindle Motor Power: 15.0 kW - Turning Speed: 6000.0 rpm Tooling: - Number of Turrets: 12 - Number of Tools on Turret: 12 - Number of Rotating Tools: 12 Common Applications: The Lynx 220LC is widely used in precision machining industries for producing complex components with high accuracy. It is suitable for manufacturing parts in automotive, aerospace, and general engineering sectors. Turning length 305 mm Turni ...

2012 DOOSAN-PUMA 400MB S/N ML0130-004497 ML0130-004497 Swing: 24 Year of Manufacture: 2012 Manufacturer: Mazak Model: PUMA 400MB Condition: Used Specifications Maximum Swing: 24 Maximum Turning Diameter: 14.75 Maximum Turning Length: 21.7 Hole in Spindle: 2.5 Bar Capacity: 3 (3.15 Hole) Maximum Spindle Speed: 4,000 RPM Turret Positions: 12 X-Axis Travel: 9.05 Z-Axis Travel: 22.63

Control Fanuc 0i-TF Rotary diameter. [mm] 376 Turning length [mm] 1245 Main spindle: Belt spindle technology Speed (max.) 2,800 rpm Power (max.) 22 kW Torque (max.) 1,124 Nm Bar passage 102 mm Workpiece clamping 3-jaw chuck, Schunk ROTA THW plus 315-104 Tool carrier (X/Z): Technology Turret with 12 stations Tool holder BMT65 Tool drive 5,000 rpm, 7.5 kW, 95.5 Nm Travel in X/Z 260/1,350 mm Rapid traverse in X/Z 24/30 m/min Tailstock: Technology Trailed tailstock with hydraulic quill Stroke 100 mm Quill ø 100 mm Cone MK5 Equipment/accessories: Chip Management Chip Conveyor Coolant Management KSS Pump Tool Measurement Arm, Renishaw Prefabricated part collection tray with collection box Oil Mist Extraction Electrostatic Separator, Fabr. Elbaron Tool holders Div. rigid and driven tool holders Other equipment transformer, oil skimmer Other accessories Rins ...

Control Fanuc 21i-TB Rotary diameter. [mm] 900 Turning length [mm] 3000 Spindle: Technology Belt spindle with gearbox Speed (max.) 1,500 rpm Power (max.) 45 kW Torque (max.) 6,600 Nm Bar passage 164 mm Workpiece clamping 3-jaw chuck, Forkardt ø630 mm Tool carrier (X/Z): Technology Turret with 12 stations Tool holder BMT85 Tool drive 3,000 rpm, 11 kW, 140 Nm Travel in X/Z 470/3,235 mm Rapid traverse in X/Z 12/10 m/min Tailstock: Technology Trailed tailstock with hydraulic quill Travel (towed) 3,135 mm Stroke 150 mm Quill ø 160 mm Cone MK6 Equipment/accessories: Chip Management Chip Conveyor Coolant Management KSS Pump Tool Measurement Measuring Arm, Omron Oil Mist Extraction Electrostatic Separator, Fabr. Elbaron RON/A 4000 DH Shaft processing bezel (eccentric) Tool holders Div. rigid and driven holders

Max Turning diameter 480 mm Max Turning lenght 790 mm Main spindle speed 2800 rpm Sub spindle speed 4500 rpm Main spindle power 22 kw With 4 pieces life tool

Turning Diameter 830 mm Turning lenght 750 mm Spindle speed 2000 rpm Controller FANUC-i Chuck size 24

ON HAND STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-DSV4536 Primary power: 60 kVA / 48 kW Standby power: 60 kVA / 48 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Doosan Engine Model: D34 Displacement (L): 3.41 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2430 mm Width: 1056 mm Height: 1600 mm Weight Open: - kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and cables Elect ...

We currently offer: Number 47 Doosan generator set Type: G60 Engine John Deere Type: CD4045G Generator Leroy Somer Power 60.4 KVA / 48 KW Hz 50 RPM 1500 AVR control R438 Year of construction 2012 Hours: 17727 Diesel pump missing You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: Number 17 Doosan generator set Type: G100 Engine John Deere Generator LeRoy Somer Power: 100 KVA / 80 KW Hz 50 RPM 1500 Year of construction 2012 Hours: 5991 dB 96 Connection 32A, 63A AVR control R438 Metrics: L: 2.70m H: 1.90m B: 1.20m Weight: 2520 kg

Control Fanuc ... i Series Turning diameter ... 600mm Turning length ... 330mm Inclined bed Spindle bore ... 61mm Turret Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 400mm Axis X ... 205mm Axis Z ... 340mm Rapid traverse of the X axis ... 30m/min Rapid traverse of the Z axis ... 36m/min Spin speed... 0-6000 rpm. Max. spindle torque ... 127Nm Main engine power ... 11/15kW Doosan Robot Cell Assembly: 2x LYNX 2100A + ROBOTEC APC7 (Fanuc AM-100 iC6L) - The machines are supplied with chucks and pliers - High pressure cooling 20bar - Arm for picking up workpieces (Ø65 x L130 mm, weight 3 kg) - Automatic door opening - Spindle bladders for cleaning the clamping jaws - Oil separator - OIL SKIMMER - Tool Load Monitor (works with X-, Z-axis and S-spindle) - Workpiece conveyor The machine is in good condition, possible to test un ...

Distance between centers: 1520 mm Max turning length: 1520 mm Max swing over bed: 750 mm Max swing over slide: 600 mm Max turning diameter: 540 mm Bar working diameter: 76 mm X1-axis travel: 555 mm X2-axis travel: 185 mm Z1-axis travel: 1595 mm Z2-axis travel: 1640 mm Y-axis travel: 160 (+/- 80) mm A-axis travel: 1565 mm C1-C2 axis travel: 360º (0.001) B-axis travel: 240º (+/- 120) X1-X2 rapid traverse: 24 m/min Z1-Z2 rapid traverse: 24 m/min Y rapid traverse: 16 m/min A rapid traverse: 24 m/min C1-C2 rapid traverse: 200 rpm B rapid traverse: 27 rpm Left and right spindle speed: 3500 rpm Left and right spindle power: 26 Kw Spindle nose: ASA A2 # 8 Bore of draw tube: 77 mm Milling spindle taper: CAPTO C6 Max speed milling head: 10,000 rpm Year: 2007 Approx machine weight: 15.500 Kgs Machine dimensions: 5500x2565x2645 mm Equipped ...

CNC Model: Fanuc - CNC Version: 18i - TB - Main Spindle Nose: ASA 8 - Main Spindle Power: 26Kw Main spindle bar passage: 81mm - Turning diameter: 300mm - Turning length: 350mm - Main spindle speed: 3500 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 255mm Y-axis travel first turret: +- 60mm First turret Z-axis travel: 800mm Number of second turret tool positions: 12 Number of motorized second turret: 12 Second turret X-axis travel: 190mm Second turret Z-axis travel: 900mm Fast feeds for linear axes X Y Z: 24m/min Sub-spindle: yes Spindle nose: ASA 8 Number of counter-spindle speeds: 3500 Counter spindle power: 26Kw Bar Passage: 81mm Z stroke sub-spindle : 810mm Chip conveyor: belt Presetting: yes Machine equipment: Machine supplied wit ...

For sale: A Doosan vertical machining center type DNM-650 II in very good condition, equipped with the proven Heidenhain TNC 530i control system. This machining center has an X, Y and Z axis movement of 1,270 x 670 x 625 mm. Table size is 1,300 x 670 mm. In addition, the machine has cooling through the spindle, a complete fourth axis (TJR) equipped with a hand-operated chuck with a diameter of 250 mm with tailstock. In addition, the machine has 30-position arm tool changer, right-ejection hinged belt chip conveyor, etc. The machine is in very good condition. Still to be seen under power, subject to sale. For more information, email chrismachinematch.nl

For sale: Powerful Doosan vertical machining center type Mynx 7500/40, equipped with the well-known control system of the Fanuc i-series including Fanuc Manual Guide i dialog area. This model, with a net weight of 13,500 kilograms, has an X, Y and Z axis displacement of 1,525 x 762 x 625 mm each. The table size is 1,600 x 750 mm. The machine is fully equipped with block guides. The pivot shot is an ISO 40 shot. The machine has a so-called arm changer with 32 positions and is also equipped with cooling through the spindle. As an extra, the machine is equipped with an integrated fourth Nikken axle with counter center. The machine also has a right-hand discharge chip conveyor. On request, you can purchase additional tool holders for the machine. The machine is in excellent condition and for more information please send an email to chrismachinematch.nl

Machine incl. complete accessories 2 tool cabinets Workbench Various clamping jaws 2 powered tools (WTO) Various turning steels (inside, outside and solid drills) Inserts

DOOSAN Manufacturer PUMA 700 Model Year 2008 CNC FANUC 21i TB Capabilities Max Ø admitted on bed/carriage 1,030/ 800 mm. Maximum turnable Ø 900 mm. Maximum turnable length 1,600 mm. Chainring size 24 (600 mm) Ø bar pitch 160mm. Routes and advances Axis Travel: X 470 (450+20) mm. Z-axis travel 1,650 mm. Maximum Speed Axes X / Z 12 / 16 m/min. Main spindle Maximum head speed 1,500 rpm Number of automatic ranges 3 Head power 45/37 kW Head torque 6,605 Nm Nose head A1 – 15 Turret No. of turret positions 12 Turret tool size 32 x 32 mm Maximum boring bar size 80 mm. Tool change time 0.25 s. Counterpoint Tailstock travel 1,550 mm. Tailstock shank diameter 160 mm Tailstock rod travel 150 mm MT6 Tailstock Rod Cone Equipment 3-jaw hydraulic chuck Ø 600 mm INCLUDED Automatic Tool Sizer INCLUDED Other Total installed power 64.44 kVA Machine Weight 16, ...

:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18-T - Spindle Nose: ASA 6 - Spindle Power: 18.5Kw - Turning Diameter: 310mm Turning length: 200mm - Main spindle speed: 3500 - Sub spindle speed: 3500 Number of tool positions for the first turret: 12 Number of fixed tool positions for the first turret: 12 Number of second turret tool positions: 12 Number of fixed tool positions for the second turret: 12 :::D DIMENSIONS AND WEIGHT::: Length: 2800mm Width: 2240mm Weight: 7000Kg

Stock number: 3953 CNC LATHE Manufacturer: DOOSAN, Type: S390 LM Aircraft NO.: LNV-1019, Year of manufacture: 2001 Specifications: Max. circumferential diameter 330 mm dia. Turning length 730 mm Turning over planing slide 580 mm dia. Main motor power 22 kw Main spindle speed range 3500 rpm Hole through drawing tube 77 mm dia. X axis movement 245 mm Z ash movement 750 mm Tool turret with 12 stations Powered stations revolver 1 12 pieces. Total power consumption 40 kva Control Fanuc 18I Fabr. Spindle operating hours 9482 hours Accessories: Hydr. Chuck main spindle 300 mm dia Chip conveyance. Tailstock Length: 6550 mm, Height: 2200 mm, Width: 2200 mm, Weight: 5000 kg

Doosan Puma TT1800SY-GL Universal Turning Center Hersteller [manufacturer]: Doosan Infrcore Type [ type]: Puma TT1800SY-GL Control unit: Fanuc Series 31i-Model A Incl. handwheel Baujahr[construction year]: 08/2012 Incl. Handling – Line Portal – Robotics Powered tools Spindle Turret Guide in the X-axis is in need of repair, defective! Operating hours: approx. 29,500h Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 11.500kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Con ...

Catalog No. : 7622 Type: PUMA 2100 MS Producer: DOOSAN Made in: 2013 Characteristic: Control system: FANUC Total hours: 77836 h Hours on: 24037 h Maximum-turning length: 520 mm Max. turning diameter: 406 mm Maximum travel length in the X-axis: 259 mm Maximum feedrate in the Z axis: 589 mm Length: 3100 mm Width: 1861 mm Height: 1899 mm Weight: 5000 kg Equipment: Späneförderer Pump 15 bar 4 tool holders Live Tools (two radial and two axial)

Inv. Num. : 7621 Type: LYNX 2100 GA Produzent: DOOSAN Erzeugt: 2021 Parametern: Steuerungssystem: DOOSAN FANUC iSeries Einschaltstunden: 4017 h Betriebsstunden: 130 h Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 350 mm Maximale Länge Verfahrweg in der X-Achse: 205 mm Maximale Länge Verfahrweg in der Y-Achse: 105 mm Maximaler Vorschub in der Z-Achse: 560 mm Länge: 1595 mm Breite: 2570 mm Höhe: 1693 mm Gewicht: 3480 kg Ausstattung: Platzsparender Stangenlader 8 Stück Werkzeughalter

Inv. Num. : 6699 Type: LYNX 220 LSA Produzent: DOOSAN Erzeugt: 2012 Parametern: Steuerungssystem: FANUC iSeries Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 300 mm Maximaler Drehdurchmesser über Bett: 600 mm Maximaler Drehdurchmesser über Support: 400 mm Maximale Spindeldrehzahl: 6000 1/min Max. Stangendurchmesser: 51 mm Länge: 2763 mm Breite: 1627 mm Höhe: 1655 mm Gewicht: 3400 kg Ausstattung: Gegenspindel Stangenlader Hydrobar

Inv. Num. : 5837 Type: LYNX 220 LSYC Producer: DOOSAN Created: 2018 Parameters: Control system: DOOSAN FANUC-i Duty cycle: 8205 h Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X-axis: 205 mm Maximum feed rate in the Z-axis: 560 mm Axis Y: 105 mm C1/C2 axis: 360 Maximum main spindle power: 15 kW Spindle clearance: 76 mm Minimum main spindle speed: 45 1/min Maximum spindle speed: 4500 1/min Maximum workpiece weight: 300 kg Maximum travel length in the B-axis: 560 mm Max. passage of bar material: 65 mm Length: 2880 mm Width: 1710 mm Height: 1920 mm Weight: 4200 kg Equipment: Bar feeder SS 2500 Conveyor

Inv. Num. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC 31i-B Duty cycle: 8981 h Maximum turning length: 600 mm Maximum turning diameter over bed: 300 mm Maximum turning diameter over support: 230 mm Number of spindles: 2 pieces Maximum main spindle power: 22 kW Spindle clearance: 76 mm Maximum spindle speed: 5000 1/min Maximum workpiece weight: 120 kg Max. rod diameter: 65 mm Axis X1/X2: 165/190 mm Axle Z1/Z2: 700/720 mm Axis Y: 100 mm B-axis: 770 mm C1/C2 axis: 360 Weight: 7800 kg Equipment: Bar feeder SS 2500 Conveyor Feeder/Dispenser

Doosan NHP5000 Horizontal Machining Center Year: 2020 Highlights: Fanuc 31i-Model B CNC Control Coolant Thru Spindle (MP Coolant Systems) Doosan LPS 5000 - (12) Station Pallet Pool System Renishaw OMP60 Spindle Probe Broken Tool Detection MistFit MF550 Mist Collector RTS-AA Touch Tool Setter LIKE NEW, Only 257 Cutting Hours Control Type Fanuc 31i-Model B # Axis 4 Pallet Length 24.8 Pallet Width 24.8 Pallet Load Capacity 3,307 pounds Pallet Indexing (B-Axis) 0.001° X-Axis Travel 31.5 Y-Axis Travel 29.5 Z-Axis Travel 33.5 Rapid Traverse Rate (X/Y/Z) 2,382 ipm Spindle Taper CAT 40 Spindle Speed 15,000 rpm Spindle Motor (HP) 50 hp Tool Changer Capacity 275 Coolant Through Spindle yes Machine Dimensions 234 x 145 x 131 Machine Weight 38,000 pounds

Make Doosan Model: G40 Year of manufacturing: 2012 Serial nr: G0400320 Working hours (on servicemeter): 10196 Capacity (KvA) 40 Capacity (Kw) 32 Engine make Mitsubishi Engine model S4S-Z3DT61SD Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 57.7 Dimensions LxWxH (mm) 2500 x 1050 x 1900 Weight (Kg) ca 1760 Total quantity in stock 1 Country of origin United Kingdom Comments Running condition and gives power, fair used generatorset

equipped with Top Automazioni Fusion 350 barfeed new in 2021, Lns Turbo HB chip conveyor, well tooled, Doosan-Fanuc i-Plus iHMI Control, IMMEDIATELY AVAILABLE.

Doosan CHP in good condition. It has the following specifications: Manufacturer: Doosan Type: BGA220 Fuel: Gas Year of construction: 2008 Kva: 600 Mass: 3740 Other specifications: 10 cylinder, electrical panel included.

CNC lathe DOOSAN PUMA TT 1800 SY with: FANUC 18i-TB controller, synchronous spindle, powered tools, 2x C-axis, Y-axis 2x Revolver, Parts Conveyor Belt, Conveyor Bar loading magazine FMB TURBO 8-80

CNC turning/milling center DOOSAN PUMA MX2600ST Year of construction 08-2012 Fanuc 31i-A with Manual Guide i Max. turning diameter: 760 mm Max. swing diameter over bed: 1,000 mm Max. turning length: 1,540 mm Max. bar passage: 76 mm Travel: X1 axis: 630 mm Y1 axle: 230 mm Z1 axle: 1,585 mm B-axis: -120° + 120° X2 axis: 220 mm Z2 axis: 1,515 mm A-axis: 1,550 mm Spindle motor main spindle 22/26 kW Spindle nose A2-8 Max. spindle speed 4,000 rpm Spindle motor sub-spindle 22/26 kW Max. spindle speed 4,000 rpm Spindle nose A2-8 Spindle motor milling spindle 22/18.5 kW Capto C6 Max. spindle speed 12,000 rpm B-axis, 0.001° Tool magazine with 40 tool positions Lower turret, 12-speed BMT65P Max. speed driven tools: 4,000 rpm Cooling by the spindle, 1.5 kW, 2.0 MPA, 21.6 l/min Coolant pump for lower turret, 2.2 kW, 1.0 MPA, 30l/min Coolant for powered tools Co ...

DoosanPuma 3100LM serial number ML0117-000145 turning 600 mm number of tool changer stations 12 coolant pump yes chip conveyor yes CNC control, brand, type Siemens sinumerik 828D dimension L 5300 mm dimension W 2100 mm dimension H 3200 mm

SWING OVER THE BED.. 30.3 SWING OVER SADDLE... 23.2 DISTANCE BETWEEN CENTERS 44.7 MAXIMUM TURNING LENGTH.. 38.5 SPINDLE BORE / BAR WORKING DIAMETER. 5.2/ 4.6 SPINDLE SPEED... 20 TO 2,000 RPM SPINDLE NOSE A2 #11 C-AXIS INDEX ANGLE.. 0.001 DEGREES RAPID TRAVERSE (X/Z AXIS)... 630/790 IPM MAXIMUM CUTTING FEEDRATE 19.7 IPR TURRET.. 12 POSITIONS ROTARY TOOL MOTOR... 15 HP ROTARY TOOL SPEED... 3,000 RPM TAILSTOCK QUILL DIAMETER 4.7 QUILL TRAVEL 4.7 MAIN SPINDLE MOTOR.. 50 HP MACHINE DIMENSIONS... 166 X 94 X 89 TALL APPROXIMATE MACHINE WEIGHT.. 21,400 LBS EQUIPPED WITH DOOSAN FANUC i SERIES CNC CONTROL 2 SPEED GEARED HEAD PROGRAMMABLE TAILSTOCK 20 3-JAW SMW AUTO BLOK CHUCK TOOL SETTER LNS MODEL MF-2 CHIP CONVEYOR 4 LIVE HOLDER (2) RADIAL (2) ANGLE

control: FANUC 21i-TB Control x-axis: 390 mm z-axis: 780 mm spindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 550 mm Turning length: 513 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan PUMA Type 240 MB Year 2007 FANUC 21i TB Doosan Puma 240 MB Centre height (mm) Swing = 550 Center distance (mm) DBC = 513 Spindle bore Bore = 76 ATC 12 Position Speeds 4500 / 11 kW Live tooling 5.5 kW / 5000 Rpm Bar feeder IEMCA 65 mm Bar feeder interface Chip conveyor 7 Bar Coolant Tool eye Tool Gripper Tool managment  

Turning diameter: 500 mm Turning length: 450 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan S310NM Type S 310 NM Year 2007 / 3412 Hours ! Doosan s310 NM with Fanuc 21 iTB Centre height (mm) Swing = 500 Center distance (mm)DBC = 450 Spindle bore CNC Fanuc 21 iTB Live tooling ATC 12 positions Bar feeder LNS servo speed Chip conveyor + Tool eye Doosan S310 NM CNC Lathe  

Turning diameter: 850 mm Turning length: 2190 mm Turret positions: 12 CNC Brand: Fanuc CNC Lathe with y-axisDOOSAN - PUMA 3100 XLY MACH-ID 8951 Make: DOOSAN Type: PUMA 3100 XLY Control: FANUC i-Series Year: 2015  Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         2190mm Spindle bore:   105mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:5500Rpm Power live tools:5kW Length:         5700mm Width:          2280mm Height:         2280mm Weight:         12300kg

Turning diameter: 25 mm Turning length: 1 mm Turret positions: 1 CNC Brand: Siemens CNC Model: Siemens 828D CNC latheDOOSAN - PUMA 2100 MACH-ID 9040 Make: DOOSAN Type: PUMA 2100 Control: Siemens 828D Year: 2012 Show price Request quotation Tool eye LNS Chip coveyor Large tooling package with holders Tailstock machine with Mk4 Length:3450mm Width:1900mm Height:1900mm

Table length: 920 mm Table width: 435 mm Longitudinal X: 762 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 828 D Make Doosan DNM 4 Type DNM 400 II Year 2014 Siemens 828 D Table length (mm) L = 920 Table width (mm)W = 435 Longitudinal X (mm) X = 762 Cross Y (mm) Y = 435 Vertical Z (mm) Z = 510 Bt40/12.000/18.5 kW ATC 30 positions 20 Bar coolant- High pressure coolant 20 Bar - LNS chip conveyor - Siemens SINUMRIK 828 D - Taster Renishaw TS 27R - Robot interface for UR 10  

Table diameter: 0 mm Turning diameter: 580 mm Turning height: 450 mm Motor power: 0 HP/kW Positions ATC: 12   Positions APC: 0   CNC Brand: Fanuc CNC Model: I Series Make Doosan Type PUMA VT 450 Year 2008 FANUC i series Centre height (mm)Swing = 580 Center distance (mm)Height = 450 Spindle bore Speeds 2500 Rpm ATC 12 positions Chip conveyor High pressure coolant