used ENGEL for sale

TECHNICAL SPECIFICATIONS: Clamping Force: 650 ton Shot Weight (Max): 2375 g Distance Between Tie-Bars (H): 1100 mm Distance Between Tie-Bars (V): 960 mm Platen Size (H): 1510 mm Platen Size (V): 1440 mm Screw Diameter: 90 mm Mould Height (Max): 950 mm Mould Height (Min): 450 mm Daylight Between Platens (Max): 1850 mm Opening Stroke (Max): 1400 mm Ejector Force: 9,50 ton Ejector Stroke: 250 mm Screw L/D Ratio: 25 Screw Speed: 190 rpm Screw Torque: 5000 N·m Injection Volume: 2610 cm³ Injection Pressure: 1583 bar Injection Rate: 751 cm³/s Nozzle Force (Max): 15 ton Nozzle Stroke (Max): 700 mm Plasticising Capacity: 123.50 g/s Heating Zones: 9 Heating Capacity: 46.40 kW

Engel E-DUO 740H/740L/700 combi BJ./YEAR 2017 approx. 3871 hrs/h Machine overview: Clamping force: 7000 kN Screw diameter: 40 mm Screw speed: 300 rpm Dosing stroke: 200 mm Control: Engel CC300 Weight: 22 tons Hours: 3871 hours Features: Electric 6-Station Turntable Electrical quick adjustment for the machine plate stroke Two injection units, each with 3-zone screw (D45 mm) 32 zones for hot runner control Electric plasticizing units Full documentation included Status: Ready for use (used) Hours: 3871 Condition of the machine: Already disassembled Defects or missing parts: No known defects, regularly serviced Technical documentation: Complete and available (can be consulted on site)

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

Engel ES200/45 HLS Year of construction 1998 Clamping force: 45 t Screw diameter 30 mm Installation height min. 180 mm Plate spacing max. 530 mm Without robot/handling

Year of Make: 2009 Clamping force: 400 tons Screw diameter: 90 mm Shot Volume: 2481 cm³ Injection pressure increased: 1599 bar incl. removal robot Engel ERC 34 Good condition

Built in 1999 Clamping force: 250 tons. Screw diameter: 70 mm incl. removal robot Engel ERC Machine is in good condition

ENGEL VC 500/130 TECH injection moulding machine was built in 2002 in Austria by ENGEL AUSTRIA GmbH. This highly efficient machine is used for the economic production of plastic parts of various colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 130 tonnes, guarantee high repeatability and quality of the manufactured parts. The offer also includes a robot for collecting finished products from the workspace. The VICTORY 500/130 TECH injection moulding machine weighs 9100 kg. Technical specifications of the ENGEL VC 500/130 TECH injection moulding machine - CNC control: ENGEL CC100 - maximum mould clamping force: 130 t ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel Victory VC500/120 injection moulding machine. This is a tiebarless machine so offers great versatility in the mould shop. With direct lock, this machine is able to accommodate a large range of mould sizes making it an ideal choice for trade moulding or those with a large suite of tools. Engel offers very good support for this model, with spares and technological know how easily available. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign  ...

Engel Victory 330/80 Tech with the Engel ER/USP sprue picker Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: approx. 188 g Spray pressure: 1665 bar Dosing volume: 201 cc Clamping unit : Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized service Engel Metrics: Weight: 5300 kg Length/Width/Height: 3.90x1.38x2.13 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical ...

Engel Victory 330/90 / Machine in very good technical condition Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: approx. 190 g Spray pressure: 1665 bar Dosing volume: 201 cc Clamping unit: Clamping force: 90 t Spar spacing: 0x0 mm Size of the clamping plates: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control:CC 200 - Touch Screen Additional equipment: Machine in very good technical condition The machine worked in the so-called clean production for the food industry Tie-bar-less machine Control with hot runners x 6 Hardened injection unit - Bimetal Machine has been regularly serviced by the authorized service Engel Metrics: Weight: 7300 kg Length/Width/Height: 4.35x1.48x2.05 m Drive: Pumps/motor: 15 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a ...

Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Metrics: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started by o ...

Engel Victory 500/110 Tech Ecodrive with the Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 40 mm Injection weight: approx. 225 g Spray pressure: 2029 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Sepro S5.15 robot Year of Make: 2016 5-axis robot: ...

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 kW  ...

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 5 Control with hot run ...

Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimeta ...

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal M ...

Engel Victory 200H/60W/180 combi / Production line with the Engel Viper 20 robot Year of Make: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Spar spacing: 0x0 mm Size of the clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced Injection Units - Bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter  ...

Engel ES 330/70H Clamping force: 70t Year of Make: 2000 Injection weight in hp: 103g Injection Unit .../330 Screw diameter: 30 mm Spec. Spray pressure: 2180 bar Injection volume: 113 cc Injection weight in hp: 103 g L/D Screw Ratio: 23.6 Clamping force 70 t Size of the clamping plates: 690 x 680 mm Clearance spar spacing: 450 x 450 mm Weight: 5200 kg Control Type: EC100 tools: -Funnel -2 x hydraulic core -EUROMAP 12

Engel ES 330/70H Clamping force: 70t Year of Make: 2000 Injection weight in hp: 103g Injection Unit .../330 Screw diameter: 30 mm Spec. Spray pressure: 2180 bar Injection volume: 113 cc Injection weight in hp: 103 g L/D Screw Ratio: 23.6 Clamping force 70 t Size of the clamping plates: 690 x 680 mm Clearance spar spacing: 450 x 450 mm Weight: 5200 kg Control Type: EC100 tools: -Funnel -2 x hydraulic core -EUROMAP 12

Engel ES 330/70H Clamping force: 70t Year of construction: 2000 Shot capacity: 103g Injection unit .../330 Screw diameter: 30 mm Injection pressure: 2180 bar Injection volume: 113 ccm Shot capacity: 103 g L/D ratio: 23,6 Clamping unit 70/... Clamping force: 70 t Plate size: 690 x 680 mm Distance between tie bars: 450 x 450 mm Weight: 5200 kg Control: EC100 Werkzeuge: -Trichter -2 x Hydraulikkern -EUROMAP 12

160 t clamping force, 35 mm master cylinder with 150 cc shot volume, 15 mm secondary cylinder with 15 cc shot volume, 16 hot runner zones, 4+4 shut-off valves, servo-controlled swivel unit on the movable mold half Working hours machine 1: 2109 Machine 2 working hours: 538 Working hours robot 1: 1083 Working hours robot 2: 99

ENGEL victory 2050H/650V/350 Combi Year of Make: 2015 Control type: Engel CC 300 Operating hours: 31000 h 1.Injection unit Screw diameter: 70 mm Max. displacement: 1155 ccm Spec. Spray pressure: 1480 bar 2. Injection unit Screw diameter: 50 mm Max. displacement: 392 cc Spec. Spray pressure: 1280 bar Clamping unit Clamping force: 3500 kN Opening travel: 1640 mm Min. tool installation height : 550 mm Max. plate spacing: 1650 mm Mounting plates: 1200 x 1100 mm Accessories: Robot Viper 40 RC 300 Core Pull Ejector Side 2 x Core pull nozzle side 2 x Air core pull 2 x Tool heater 24 x Cascade control 8-way Robot Engel Viper 40 RC 300 Z – axis : 3320 mm X axis : 1200 mm Y axis : 1500 mm B – Axis : Servo + 90° - 180 ° C - Axis : Air 0 - 90°

ENGEL ES 16050-800 DUO Stock No.: 503583 Manufacturer: ENGEL Type: ES 16050-800 DUO Control: CC 100 Year of Make: 2007 Technical data closing page Clamping force: 8000 kN Wooden dimensions h x v: 1170 x 1000 mm Plate size h x v: 1550 x 1470 mm Min. installation height: 500 mm Max. installation height: 1100 mm Plate spacing max.: 2100 mm Opening distance: 1600 mm Ejector stroke: 300 mm Ejector force: 180 kN Centering of movable plate D: 200 mm Centering of fixed plate D: 200 mm Tool weight: 21600 kg Technical Data Spray Side Screw diameter: 135 mm Displacement: 8870 cc Spray pressure: 1640 bar Screw length: 22 l/d Screw stroke: 620 mm Screw speed: 100 min Number of heating zones: 7 Nozzle travel: 950 mm Dimensions & Weight Machine dimensions LxWxH: 11.81m x 3.2m x 2.9m Total Weight: 51000KG Equipment Screenshot Czech CEE socket 32A Cascade cont ...

Used to manufacture very sophisticated ABS products, is continuously maintained by Engel Service, machine in top condition. Wear parts replaced regularly, technically and aesthetically demanding machine. Equipped with many extras, she worked in a production cell. Can also be viewed during production. Please see our other advertisements.

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Engel Victory 330/110 Tech Closing force: 110t Year of production: 2004 Injection unit 330/... Screw diameter: 30 mm Specific injection pressure: 2178 bar Injection volume: 113 ccm Injection weight: 103 g Tool clamping system 110/... Closing force; 110 t Tool plate dimensions: 680 x 740 mm Column clearance: without columns mm Ejector force: 40 kN Opening Path: 500mm Ejector Stroke: 130 mm Weight: 7400 kg Dimensions (m) L x W x H: 5.2 x 1.6 x 2.2 m Control: CC200

Angebot/Offer: ENGEL E-Victory 170/60 Year of manufacture 2018 Nur/Only:18500h Viper Robot 20

Injection moulding machines ENGEL Victory 1050-220 TECH Stock No.: 503559 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of Make: 2006 Hours: 62149 h Technical data closing page Clamping force: 2200 kN Plate size h x v: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Opening travel: 755 mm Ejector stroke: 180 mm Ejector force: 80 kN Centering of movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 230 min Plasticizing current: 55 g/s PS Outdoor injection flow: 255 g/s hp Number of heating zones: 5 Nozzle travel: 350 mm Dimensions & Weight Machine dimensions LxWxH: 6.8m x 1.8m x 2.4m Total Weight: 12900KG Equipment Screen text German Machine includin ...

Injection moulding machine ENGEL Victory 330-120 Tech Stock No.: 503558 Manufacturer: ENGEL Type: Victory 330-120 Tech Control: CC100 Year of Make: 2007 Operating hours: 68000 h Technical data closing page Clamping force: 1200 kN Panel size h x v: 740 x 470 mm Min. installation height: 300 mm Plate spacing max.: 800 mm Opening travel: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 825 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw stroke: 160 mm Screw speed: 400 min Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 5.1m x 1.5m x 2.1m Total Weight: 7300KG Equipment Screen text German Levelling elements  ...

Injection moulding machine ENGEL Victory 200-28 Tech Stock No.: 503562 Manufacturer: ENGEL Type: Victory 200-28 Tech Hours: 31150 Control: CC200 Year of Make: 2011 Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 135 cc Spray pressure: 1065 bar Screw length: 17 l/d Screw stroke: 140 mm Screw speed: 480 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Equipment Screen text German Levelling elements Technic ...

Injection moulding machine ENGEL Victory 200-80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control: CC 100 Year of Make: 2005 Hours: 76679 h Technical data closing page Clamping force: 800 kN Panel size h x v: 670 x 420 mm Min. installation height: 250 mm Plate spacing max.: 700 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Screw length: 20 l/d Screw stroke: 140 mm Plasticizing current: 17 g/s PS Injection flow to the outside: 150 g/s hp Number of heating zones: 4 Nozzle travel: 200 mm Dimensions & Weight Machine dimensions LxWxH: 4.05m x 1.93m x 2.1m Total Weight: 5200KG Equipment Screen text German Levelling eleme ...

Stock No.: 503570 Manufacturer: ENGEL Type: SPEED 380-55 Control: CC200 Year of Make: 2009 Hours: 49679 h Technical data closing page Clamping force: 3800 kN Lifting dimension h x v: 780 x 780 mm Panel size h x v: 1100 x 1100 mm Min. installation height: 300 mm Max. installation height: 750 mm Plate spacing max.: 1450 mm Opening travel: 712 mm Ejector stroke: 220 mm Ejector force: 96 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 5200 kg Technical Data Spray Side Screw diameter: 55 mm Displacement: 404 cc Spray pressure: 1390 bar Screw length: 24 l/d Screw speed: 340 min Outdoor injection flow: 1901 g/s hp Number of heating zones: 6 Nozzle travel: 465 mm Dimensions & Weight Machine dimensions LxWxH: 7.75m x 2.3m x 2.5m Total weight: 19000KG Equipment Core pull hydraulic 1x Air valve 4x Machine including pro ...

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Screw diameter: 30 mm Stroke volume: 99 cm³ Injection weight in polystyrene: 90 g/hp Injection pressure: 2,210 bar Clamping force: 80 t tie-barless Tool installation height min.: 250 mm Opening distance: 450 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german EM67 for robots: Yes Pump drive power: 15kW Total connected load: 21.8 kW Total weight: 5,200 kg Dimensions L x W x H: 4.0 x 1.4 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Machine in production !1

Angebot/Offer: Engel e-mac 310/75 >>>> Manufacturer: Engel >>>> >>>> Type: E-MAC 310/75 >>>> >>>> Serial No. 189970 >>>> >>>> Year: 2013 >>>> >>>> Controll Version: CC200 >>>> >>>> Clamping force: 75 ton >>>> >>>> Screw diameter: 35 mm >>>> >>>> Max volume: 154 cm3 >>>> >>>> Size of mould platens: 650x600 mm >>>> >>>> Mould opening stroke: 350 mm

ENGEL victory 2050H/650V/350 Combi Year of Make: 2015 Control type: Engel CC 300 Operating hours: 31000 h 1.Injection unit Screw diameter: 70 mm Max. displacement: 1155 ccm Spec. Spray pressure: 1480 bar 2. Injection unit Screw diameter: 50 mm Max. displacement: 392 cc Spec. Spray pressure: 1280 bar Clamping unit Clamping force: 3500 kN Opening travel: 1640 mm Min. tool installation height : 550 mm Max. plate spacing: 1650 mm Mounting plates: 1200 x 1100 mm Accessories: Robot Viper 40 RC 300 Core Pull Ejector Side 2 x Core pull nozzle side 2 x Air core pull 2 x Tool heater 24 x Cascade control 8-way Robot Engel Viper 40 RC 300 Z – axis : 3320 mm X axis : 1200 mm Y axis : 1500 mm B – Axis : Servo + 90° - 180 ° C - Axis : Air 0 - 90°

ENGEL victory 1050/180 tech Year of Make: 2014 Engel CC 200 Control Operating hours: 34000 h Injection unit Screw diameter: 45 mm Injection weight in hp: 310 g Max. displacement: 341 cc Spec. Spray pressure: 2400 bar Clamping unit Clamping force: 1800 kN Opening travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Hydr. Cascade 4 x Core Slide 3 x Tool heater 20-fold

Injection molding machines in very good condition for sale Engel 200/40 TECH Year of production: 2007 Control system - CC 200 1. Capping unit: - Closing force: 400 kN - Plate dimensions: 550 x 430 mm - Minimum mold height: 180 mm - Maximum opening width: 530 mm 2. Injection Unit: - Screw diameter: 30 mm - Injection volume: 99 cm³. - Injection size: 91 г - Injection pressure: 1451 bar 3. Electro-hydraulic equipment: - Pump motor power: 15 kW 4. Dimensions and Weight: - Net weight with control cabinet: 2.7 т - Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m

Currently undergoing the refurbishment process by our expert in-house team of engineers is this 2011, tie-bar-less Engel Victory 1050/220 Spex injection moulding machine, complete with full cell including Viper Robot and integrated Conveyor. Fitted with a 55mm plasticising unit. A very versatile machine with proven technology and good support from the people at Engel UK. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault fre ...

used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English  ...

Stock No.: 503475 Manufacturer: ENGEL Type: Victory 200-50 Tech Control: CC200 Year of Make: 2010 Hours: 41678 h Technical data closing page Clamping force: 500 kN Panel size h x v: 500 x 450 mm Min. installation height: 200 mm Plate spacing max.: 600 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 600 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 135 cc Spray pressure: 1065 bar Screw stroke: 100 mm Screw speed: 480 min Outdoor injection flow: 204 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.35m x 1.3m x 1.8m Total Weight: 2900KG Equipment Screen text German Screentext English CEE socket 16A Core pull hydraulic 1x Machine with water battery Machine without materi ...

Injection moulding machines ENGEL VICTORY 200-50 Tech Stock No.: 503479 Manufacturer: ENGEL Type: VICTORY 200-50 Tech Control: CC300 Year of Make: 2021 Hours: 8286 h Technical data closing page Clamping force: 500 kN Panel size h x v: 500 x 450 mm Min. installation height: 200 mm Plate spacing max.: 600 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 600 kg Technical Data Spray Side Screw diameter: 25 mm Displacement: 69 cc Spray pressure: 2090 bar Screw length: 25 l/d Screw stroke: 140 mm Screw speed: 480 min Worm torque: 240 N Injection flow to the outside: 104 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.4m x 1.3m x 2.17m Total Weight: 2900KG Equipment Sprue removal device include ...

Stock No.: 503477 Manufacturer: ENGEL Type: Victory 80-28 Tech Control: CC200 Year of Make: 2010 Hours: 39533 h Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 22 mm Displacement: 38 cc Spray pressure: 1590 bar Screw length: 19 l/d Screw stroke: 100 mm Screw speed: 360 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Sprue removal device included Screen text German Screentext English CEE socket 16A Levelling elements Interfa ...

Stock No.: 503476 Manufacturer: ENGEL Type: Victory 80-28 Tech Control: Year of Make: 2010 Hours: 35056 h Technical data closing page Clamping force: 280 kN Panel size h x v: 500 x 450 mm Min. installation height: 150 mm Plate spacing max.: 550 mm Opening travel: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 450 kg Technical Data Spray Side Screw diameter: 22 mm Displacement: 38 cc Spray pressure: 1590 bar Screw length: 19 l/d Screw stroke: 100 mm Screw speed: 360 min Injection flow to the outside: 78 g/s hp Number of heating zones: 4 Nozzle travel: 230 mm Dimensions & Weight Machine dimensions LxWxH: 3.2m x 1.35m x 1.85m Total Weight: 2900KG Sprue removal device included Screen text German Screentext English CEE socket 16A Levelling elements Interface EU ...