used FERROMATIK MILACRON for sale

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Metrics: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offered  ...

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

Technical details Clamping unit Clamping force: 1100 kN Stand spacing (h x v): 470 x 470 mm Passage: 550 mm Min. mould height: 250-450 mm (variable) Maximum distance: 800-1000 mm (variable) Hydraulic ejector travel: 150 mm Injection unit Screw diameter: 40 mm Spray pressure: 2240 bar Spray volume: 201 cc Electrical and hydraulic data Pump motor: 22 kW Heating: 12.7 kW Heating zones: 4+1 Oil Fill(l): 290 Sizes and Weight Sizes (LxWxH): 5.0 m x 1.6 m x 2.0 m Weight (without oil): 5600 kg Accessories - Complete manual with hydraulic and electrical diagrams, parts list - Machine feet with anti-vibration insert - 1x core pull - 1x pneumatic valve - 12x mold heating control - 8 x water distributor for the tool -Robot

Screw diameter: 90 mm Stroke volume: 2,545 cm³ Injection weight in polystyrene: 2,188 g/hp Injection pressure: 1,917bar Clamping force: 800 t Lights Tiebar spacing H x V: 1,400 x 1,080 mm Tool installation height min./max: 400/1200 mm Opening distance: 2,250 mm CONTROL: Mosaic Screen text: german / english Instruction manual: german FHK interface for robots: Yes Core pull: 6 Pump drive power: 130 kW installed heating capacity: 55 kW Total weight: 40,000 kg Dimensions L x W x H: 9.9 x 3.1 x 2.9 m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 22 mm Stroke volume: 29 cm³ Injection weight in polystyrene: 26 g/hp Injection pressure: 1,939 bar Clamping force: 30 t Lights Handlebar spacing H x V: 300 x 300 mm Tool installation height min./max: 150/ 350 mm Opening distance: 250 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: EM67 Core pull: - Pump drive power: no installed heating capacity: 4.9 kW Total weight: 2,700 kg Dimensions L x W x H: 3.5 x 1.3 x 1.9 m Payment terms: 100 % before taking over the machine, net only

Ferromatics Milacron Type: K-TEC 85-S Vtryskarka (85 tonowa) Numer seryjny: 522500 Rok produkcji: 2008 Masa maszyny: 5500 kg Średnica ślimaka: 25 mm Siła zamykania: 850 kN Godziny pracy: 24.386h.

Ferromatics Milacron Type: K-TEC 110D-S Hydrauliczna maszyna do formowania wtryskowego tworzyw sztucznych (110 tonowa). Numer seryjny: 525304 Rok produkcji: 1999r. Siła zamknięcia: 110 T Średnica ślimaka: 40 mm Prześwit między kolumnami X: 470 mm Prześwit między kolumnami Y: 470 mm Objętość wtrysku: 201 cm³ Gramatura wtrysku: 171 g Specyficzne ciśnienie wtrysku: 1568 bar Godziny pracy: 78.763h.

Screw diameter: 35 mm Stroke volume: 173 cm³ Injection weight in polystyrene: 158 g/hp Injection pressure: 2,445 bar Clamping force: 155 t Lights Tie bar spacing H x V: 520 x 520 mm Tool installation height min./max: 200 / 590 mm Opening distance: 440 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: Yes Core pull: 0 Pump drive power: no installed heating power: 13.1 kW Total weight: 7,800 kg Dimensions L x W x H: 5.5 x 1.6 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 140 g/hp Injection pressure: 1,943 bar Clamping force: 110 t Lights Tiebar spacing H x V: 420 x 420 mm Tool installation height min./max: 150/ 480 mm Opening distance: 350 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: no installed heating power: 11.2 kW Total weight: 5,500 kg Dimensions L x W x H: 4.6 x 1.6 x 2.0 m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 22 mm Stroke volume: 29 cm³ Injection weight in polystyrene: 26 g/hp Injection pressure: 1,939 bar Clamping force: 50 t Lights Tie bar spacing H x V: 320 x 320 mm Tool installation height min./max: 150/ 410 mm Opening distance: 260 mm CONTROL: Mosaic Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 1 Pump drive power: no installed heating power: 4.8 kW Total weight: 3,200 kg Dimensions L x W x H: 4.0 x 1.6 x 1.9 m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 60 mm Stroke volume: 905 cm³ Injection weight in polystyrene: 824g/hp Injection pressure: 2:300 bar Clamping force: 350 t Lights Tiebar spacing H x V: 710 x 710 mm Tool installation height min./max: 300 / 900 mm Opening distance: 1:000 mm CONTROL: Mosaic Screen text: german / english Instruction manual: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 75 Kw Total connected load: 106.0 kW Total weight: 16000 kg Dimensions L x W x H: 6.8 x 2.2 x 2.6 m Payment terms: 100 % before taking over the machine, net only

Machine in good condition, ready for production, IQT33 control, English, German, Hungarian display, 60 T clamping force, 355x355 mm column spacing, smallest and largest sheet metal spacing (tool height) adjustable by changing the push pins. The 265 injection molding unit is equipped with a 35 mm screw and can deform 135 cm3 of material. The highest injection pressure is 1964 bar. Tested, production-ready machine with brand-new hydraulic pump. Other machines from the plastics industry are also for sale.