Power chuck Condition good 3 Baking No. 1539359 Nmax 4000 rpm Ø 250 mm Chuck width 95 mm Centering diameter 220 mm Thread M30 Guide pin Ø 100 mm
Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€
used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)
Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€
As good as new three-jaw chuck FORKARDT F+250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners Three-jaw chuck incl. flange ♦ 4 x Fastening bolts, spindle mounting flange - bayonet lock ♦ Tension wrench available. Pictures: Three-jaw chuck No. 1628855 ♦ incl: flange mount DIN 55027 - J8 ø 139 mm. ♦ Without base jaws and top jaws: (option 170,00€) ♦ Without feed key not included: (option if available) Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.
Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.
Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.
3-jaw wedge rods lathe chuck FORKARDT TYPE F+160No. 1659 181Identical to Forkardt, SMW or RöhmDiameter: 160 mmInner diameter: 45 mmChuck flange: Short taper DIN 55022 Size 61 Set of chuck jaws consisting of basic jaws and hard top step jaws for turning1 set of chuck jaws consisting of basic jaws and soft top step jaws for turning- central adjustmentWeight: 11 kggood condition; used
3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 Identical to Forkardt F315 or SMW Diameter: 160 mm Inner diameter: 45 mm Chuck flange: Short taper DIN 55022 Size 6 1 set of chuck jaws consisting of base jaws and hard top step jaws for turning 1 set of chuck jaws consisting of basic jaws and soft top step jaws for turning central adjustment Weight: 11 kg Good condition; used
diameter: 315 mm bore: 89 mm dimensions of the machine ca.: m Wedge bar chuck with short taper DIN 55027 / Gr. 8, for 4 studs, 1 set Baking, studs not available. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100
used
Outer 400 mm, mounting cone 196 mm, DIN 55027 size 11 Fmax 9000 daN, nmax 3000 min-¹, bayonenette lock 6 bolts
diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 identical Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short cone DIN 55022 Size 6 1 set of feed jaws consisting of basic jaws and hard attachment step jaws for turning 1 set of feed jaws consisting of basic jaws and soft attachment step jaws for turning - central adjustment Weight: 11 kg good condition; used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Diameter: 350 mm Machine´s weight about: 120 kg
diameter: 250 - 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 315 mm weight of the machine ca.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
