used HUNDEGGER for sale

HUNDEGGER K2 450 – 5 axes TOP 1 a maintained Year of manufacture 2004 • Type: 450 • Colour: RAL 5012 (blue) • Length of wood: 8 m / 7 m shelf • Catchment 5.37 m • Feed cross conveyor 5-strand 2.2 m horizontal • Pull-out wooden shelf • Under-table swivel cross-cut saw • Block disposal by box • Universal milling machine 5-axis o Roller milling cutter o Finger cutter o Dovetail cutter • Combined support for vertical tools o Finger milling machine 1 o Finger milling machine 2 • Combined support for horizontally working tools o Drilling rig swivel 2.2 kW • Marking and labeling device • Pneumatic beam turning station • 6-arm side table plant available at the end of 2025. Sale of the entire used joinery system as inspected ex site without warranty and guarantee. Payment of 100% of the gross purchase price immediately upon receipt of t ...

HUNDEGGER K2i 650 TOP 1 a maintained Year of construction 2017 • Machining cross-sections 300 x 650 mm • Frame length 13.56 m • Fully automatic timber feeding • Feed roller conveyor • Feed and feed cross conveyors • Under-table swivel cross-cut saw 11 kW • Universal milling unit 5-axis (UF5) o Roller milling cutter o Finger cutter o Dovetail cutter • Combined support for vertical tools o 2x vertical finger tiller 5.5 kW o 2x Drilling rig 2.2 kW o 1x Drilling rig 3 kW • Combined support for horizontally working tools o 1x Drilling rig 2.2 kW - drilling direction horizontal o 1x drilling rig swivelling 45° (3.0 kW) o 1x Slitting device 7.5 kW • Turret milling unit - vertical from above • Longitudinal and transverse groove milling machine • Rear marking device (stop side) • Front marking device (operator-side) • Marking and labeling de ...

Carpentry machine Hundegger k2 625 5 axis year 2003

1 used K1 carpentry machine overhauled by Hundegger in 2020 with full equipment 4-axis system, machine in one piece 18 m long and weighing approx. 15 t. Max. wood cross-section that can be processed: 300 mm x 450 mm With dovetail cutter and much more. IMMEDIATELY available, system set up and ready for demonstration. With all used tools to the system Sale as seen from location Germany without warranty. Payment immediately upon receipt of the invoice without deduction. The price is without disassembly, loading, packing, customs fees, transportation, etc. Machine is fully functional. More details will be available on your request.

A used PICK and FEED system from Hundegger, built in mid-2019, very good maintained condition. Available summer 2026, sale as viewed from the FRG location. The system can be demonstrated by appointment. Sale without dismantling by Hundegger.

A used HUNDEGGER K2 Industrie Type. 1250 with full equipment – CAMBIUM production program Year of construction: end of 2019 Incl. the entire used Pick & Feed System from Hundegger Year of construction 2019 Equipment Hundegger K2 Industrie Fully automatic feeding through the Pick & Feed system Saw unit 13 KW 5 Axis Unifräse 15 KW Servo drive in the positioning carriages Suspended dust extraction Feed cross conveyor and feed roller conveyor for 16 m Zero stop for pre-elongated components Log holder in front of the universal saw Multi-length machining Lifting and lowering safety baffle plate on inlet and outlet Horizontal saw 900 mm 11 KW Turret milling unit installed vertically from above Universal Blade Milling Machine UBF 280 3 drilling rigs vertical hydraulic 2 vertical finger cutters at the bottom with 5.5 KW each 1 Drilling rig horizontal, 2.2 KW 1 drill ...

HUNDEGGER K2 COMPLETE UNDUNDANCY SYSTEM BUILT IN 2000

HUNDEGGER K2 COMPLETE UNDUNDANCY SYSTEM BUILT IN 2000

• 1 used HUNDEGGER Speedcut SC3-200 Year of construction 2012 Fully automatic cutting system • 5-axis sawing station with angular and tilt drive • Automatic feeding system • Feed cross conveyor 6 strands for timber length up to 13 m • Combined support for vertical tools o Drilling rig 1 – 2.2 kW o Vertical finger tiller 5.5 kW o Turret milling unit 7.5 kW • Combined support for horizontally working tools o Drilling rig 2 - 2.2 kW o Drilling rig 3 - 2.2 kW • Marking device at the bottom • Rear marking device / stop side • Marking device front / operator side • Ink marking system Inkjet 4 rear / stop side • Component support for small cross-sections • Control unit for disposal • Conveyor belt for waste disposal integrated in the SC3 • 6-arm side table • Incl. discharge conveyor belt Conveyor length 6.00m Regular service verifiable, onl ...

HUNDEGGER Slab Cutting Machine SPM 2 Description 1 used HUNDEGGER panel cutting machine, machine type SPM2-1300x3200 • Panel format 1.3 m x 3.2 m • Colour RAL3000 (red) incl. control cabinets and control panel • Circular saw unit 4-axis, 9.2 kW • Finger tiller 6.0 kW; max. 17,400 rpm - 4 units • InkJet-HP ink marking system, rotatable, moving along • Table with extension ruler • Grab wagon complete -narrow • Portal complete • Carriage LWY (1300x3000) vormon. FF • Control panel complete • Enclosure of the machine zone • Suction FF base • Joining fence 3200 • Edging ruler complete • Extended access control for the conveyor area • Automatic feeding • Lift table (special version) Package Task 1300x3200 • Automatic plate feeding with electric motor •Remote maintenance • Software license for nesting (1 license) • Floating dus ...

This 4-axis HUNDEGGER Speed-Cut SC1, manufactured in 2003, is a universal machine center that offers advanced wood processing capabilities. It features computerized cutting, drilling, and milling with a maximum cutting height of 160 mm and width of 450 mm. The machine is equipped with a programmable controller for saw blade adjustments and a pneumatic clamping system, ensuring efficient material handling. The robust 4-axis CNC control enhances precision in operations. For more information about this machine center, please reach out to us.