used JOOS for sale

Veneer press Joos Hydraulic Hot Plate Press Type HP 65/1 Machine No. 2313 Pressing area 2200 x 1100 mm Opening height max. 300 mm 2 electrically heated plates 4 hydraulic cylinders Cylinder diameter 80 mm Rack and pinion guide Press pressure 2.7 kg/cm² at 100% design Pressing pressure 3.8 kg/cm² at 70% design Closing time approx. 16 sec. Power requirement 1.1 kW Dimensions 2600 mm x 1250 mm x H 1800 mm Weight approx. 2,500 kg

Veneer press - School press - Test press JOOS HP-45 YOC 1991 Pressing area: 180 x 90 cm New cover plates (anodised aluminium) Opening width: 39 cm 4 hydraulic cylinders each with a diameter of 65 mm Operating pressure: 325 bar Press pressure: 450 kN Spec. Pressure: 2.7 daN/cm² Ges. Connected load: 10.7 kW (rated current: 28.22 A) Power per heating plate: 4,700 W Circumferential safety step strip inside + outside (emergency stop) Swivel control unit All 4 hydraulic cylinders have been resealed (new seal kit) External dimensions: approx. 220 x 110 x 191 cm (LxWxH) Weight: approx. 1,980 kg

gebr veneer press – school press – test press JOOS HP45 (presumably type: HP 45) YOC 1978 Ges. Connected load: 7.6 kW Power per heating plate: 3,050 W Pressing area: 120 x 120 cm Gold-anodized aluminum electric heating plates ELKOM Opening width: 19 cm 4 hydraulic cylinders each with a diameter of 65 mm Pressing pressure: 45 t Spec. Pressure: 3 kg/cm² Circumferential safety step strip (emergency stop) new digital clock All 4 hydraulic cylinders have been resealed (new gasket kit). Weight: estimated approx. 1,800 kg External dimensions (LxWxH): 159 x 136 x 175 cm

PART NUMBER: 7553 Specifications: - dimensions of the hobs 2550x1100mm - number of batches 1 - electrically heated shelf - ground clearance 360mm - Number of cylinders 4 - cylinder diameter 80mm - emergency disconnection of the machine - total power 15.5kW - 1.5kW pump motor - dimensions length/width/height 2900x1300x2100mm - weight about 3000kg ADVANTAGES – made in Germany – electrically heated shelves – golden shelves – unpainted – very good condition – used press Net price: 27900 PLN Net price: 6488 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7552 Specifications: - dimensions of the hobs 2550x1350mm - number of batches 2 - electrically heated shelf - total ground clearance 400mm - Clearance between shelves 280mm and 100mm - Number of cylinders 4 - cylinder diameter 90mm - 1.1kW pump motor - total power 31.3kW - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – very good condition – used press Net price: 28900 PLN Net price: 6721 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

Panel dimensions 1800 x 900 mm Electric heating 2 x 4 kw Working height 300 mm Dimensions 210x107x180 cm

Panel dimensions 2200 x 1100 mm

A Joos veneer press is being sold. The press was completely overhauled by Joos in 1994 and is very well maintained. Plates are gold anodized. Plate dimensions approx. 255x135cm VAT not reclaimable

2500 x 1250 mm, gold anodised.

- Gold anodized heating plates 2.5 x 1.1 m - Safety ripcord Hints: According to the owner, the heating plates were recently replaced, but there is oil loss on 2 cylinders The sale is made on behalf of the owner from the current location

grinding wheel diameter: 400 mm no. of working stations: 1 Stück total power requirement: 1,7 kW weight of the machine ca.: 0.4 t With coolant system More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plate dimensions: 3.000 x 1.350 mm Daylight opening: 400 mm Number of daylights: 1 St. Heating: Elektrisch Specific pressure: 2,84 kg/cm² Total pressure: 115 to Motor output: 2,2 kW Dimensions (L/W/H): 3.500 x 1.630 x 2.200 mm weight of the machine ca.: 5.000 kg safety device: Notaus-Trittleiste The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Joos Model: HP-S 360 Condition: used Machine Hours : 15.321 h Type of Machine: Press Find more here - / Contact us at -

Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018

pressing area: 2500mm x 1250mm; opening: 400mm; heating: elektric; plate surface: ALU - anodized; pressure: 90t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

Plate dimensions: 3.000 x 1.250 mm Daylight opening: 400 mm Number of daylights: 1 St. Heating: elektrisch Specific pressure: 3,1 kg/cm² Total pressure: 115 to Motor output: 2,2 kW weight of the machine ca.: ca. 5 kg safety device: Notausleine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.