Jrion & Denz longitudinal saw Type HMS 15 Cutting length 3000 mm Cutting width 500 mm Cutting height approx. 100 mm Width stop can be adjusted motorically at the touch of a button Saw motor 12 kW was mainly used to cut 80 mm thick planks Saw is activated via footswitch Good, ready-to-use condition Dimensions: L 5.80 m x W 1.55 m
Useful cutting length: 4000 mm Width at the parallel fence: 500 mm Selectable working cutting height: 170 mm Blade diameter: 400 mm (max 550 mm) Hydraulic feed of the sawing unit: 80 m/min 5.5 kW motor Power supply and connection: Voltage: 380 V Connection: Three phase Engine: 10 HP
Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...
