used KÖLLE for sale

Table milling machine Kölle Milling machine and circular saw combined Type FK 5 Machine No. 462 With feed ELU With 30 mm and 40 mm milling spindle With sliding table Motor power tiller 3 kW Milling shaft speed 2800/4500/6000/10000 rpm. Spindle left and right rotation Table size 1400 mm x 920 mm Table opening minimum 70 mm – maximum 390 mm Milling spindle 30 mm with clamping length 130 mm Milling spindle 40 mm with clamping length 140 mm Feed ELU with 3 rollers Saw motor power 1.5 kW Saw blade spindle diameter 30 mm Speed 3300 rpm. Saw blade diameter maximum 350 mm Cutting height maximum 105 mm Sliding table support 1100 mm x 450 mm Extraction connection diameter 2 x 120 mm Weight 1050 kg with pallet Dimensions for shipping 1 pallet with sliding table 2700 mm x 800 mm x H 1000 mm 1 pallet with machine 1600 mm x 900 mm x H 1800 mm

Dresser Kölle Surface planing machine Type AH 50 Machine No. 137 Year of manufacture 1985 Planing width 500 mm Maximum cutting depth 8 mm Dressing tables 1450 mm + 1270 mm Dressing stop 1100 mm x 150 mm Swivelling dressing stop Motor power 5.5 kW Engine slightly slowed down 4 Knife Shaft Strip planer knife Serrated table lips for noise reduction With Kölle swing protection for planer blade shaft With spare blades With planer knife adjustment gauge Weight with pallet 650 kg Dimensions 2800 mm x 850 mm x H 1000 mm

Slotted Hole Drilling Machine Cologne With dowel grid Type L2 with 2 clamping cylinders for workpiece holding Dowel drilling device with pitch 16, 22, 25, 32 mm With frame stop system Motor power 1/1.1 kW Drilling depth 150 mm Drilling length 200 mm Maximum drilling height 120 mm Table size approx. 820 x 350 mm Drill chuck 3 – 20 mm

Current consumption 10.5A 50Hz, voltage 400V Motor knife shaft 5.5A Planing width 500 mm Largest chip depth 8 mm Total table length 2500 mm Knife shaft D=125 mm with TERSA knives Knife shaft speed 5000 rpm Special accessory: Knife shaft cover Suvamatic

M.-No. 912, year 1995, motor power 8.6 kW, voltage 400V 50Hz, spindle 30 + 40 mm, sliding table: yes, round milling: yes, brake and emergency stop, speeds: 3000, 4000, 6000, 8000, 5000, 10000 rpm, accessories: Aigner stop,

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Koelle Edge Planer Model FKF 51 Built in 1993 max material thickness 45 mm, Machine size L 304 x W 65 x H 87 cm, Joining head with carbide reversible knife mobile Weight approx. 360 kg The machine is in good condition, ready for use. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990

Motor movable, height adjustment by handwheel, dowel drilling device, center stop, adjustable angle stop, travel device ---------- Technical data ---------- work table dimensions: 820x340 mm, drilling width: 210 mm, drilling depth: 155 mm, height adjustment: 120 mm, speed: 1,500 and 3,000 rpm., drill chuck: 1-20 mm, motor: 0.9/1.4 kW, dimensions (LxWxH): 830x1,200x1,350 mm, weight: 220 kg Sale in as-is condition, without technical inspection