Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 x 2,000 mm (width x depth x height) Weight: appr ...
Kannegiesser GF600/5000 belt conveyor 5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor is equipped with a motor with a frequency converter to regulate the conveying speed. This belt conveyor is specially designed for applications that require a strong drive Belt Conveyor GF600/5000 Belt width: 600 mm Total width: 680 mm Belt length: 5000 mm Belt length with bend: 5500 mm Connection voltage: 400 V Interroll Drum Motor Emerson Frequency Drives Year of construction: 01/2013 Conveying speed (v m/s): can be adjusted up and down with frequency converter More items new and used - can be found in our shop! International shipping costs on request!
Kannegiesser 75 cm Belt conveyor 5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter for regulating the conveying speed. The supports shown can also be used as support feet for standing use. This belt conveyor is specially designed for applications that require a strong drive Belt width: 750 mm Belt length: 5000 mm incl. support feet Connection voltage: 400V Engine Conveying speed (v m/s): adjustable up and down with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!
Kannegiesser Diagonal conveyor belt 75 cm Belt conveyor 4 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter to regulate the conveying speed. The supports shown can also be used as support legs for standing use. This belt conveyor is specially designed for applications that require a strong drive Strap width: 750 mm Belt length: 4000 mm incl. support legs Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!
Kannegiesser Diagonal conveyor belt 75 cm Belt conveyor 5 m The Kannegiesser belt conveyor is in very good condition. The belt conveyor has a motor, with frequency converter to regulate the conveying speed. The supports shown can also be used as support legs for standing use. This belt conveyor is specially designed for applications that require a strong drive Strap width: 750 mm Belt length: 5000 mm incl. support legs Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!
Kannegiesser roller curve conveyor 90° roller conveyor 60 cm The Kannegiesser roller curve conveyor is in very good condition. The roller conveyor has a motor, with frequency converter to regulate the conveying speed. The supported supports shown can also be used as support feet for standing use. Roller curve conveyor 90° Roll width: 600 mm Total width: 680 mm incl. support feet H = 635 mm +/- 50 mm adjustable Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!
Kannegiesser temple press collar and lapel press XKK-B DPF Kannegiesser Ironing press Collar and lapel press model XKK-B DPF Machining collars & cuffs in a single operation Dimensions: depth 130 cm x width 114cm x height 145cm Year of construction 11/1998 Weight 390 Kg Operating pressure 8 bar Air consumption approx. 100 Kg Vapour pressure 16 bar with control Kannegiesser IBT-Net Device runs flawlessly
