We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Description Used Krämer 900 tablet deduster with LOCK metal detector, built in 2007, for dedusting, vertical conveying and metal inspection of tablets. The spiral conveyor line transports the tablets upwards and removes adhering tablet dust. The tablets then reach the outlet via a product chute through the connected metal detector. The transparent cover allows visual inspection of the conveyor line. Facilities Vertical, spiral dedusting and conveying line Transparent cover LOCK metal detector with separate control unit Excretion device with collection container Stainless steel construction Mobile undercarriage Allen-Bradley Control Panel Technical data Manufacturer: Krämer AG, Switzerland Type: Krämer 900 Year of Make: 2007 Input voltage: 100–240 V Frequency: 50/60 Hz Current consumption: 2.2 A Item number: 02-J040 Location and Sales The machine is fo ...
Offer 26308 Technical data: - Max. working width 3040 mm - max. material thickness at 40 kp / mm² strength 2 mm - Bending angle adjustment electronically 0 - 180 ° - Automatic follow-up control for a complete workflow - Highest working setting of the upper beam 250 mm - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 30 mm - the lower beam 90 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 4450 x H 1650 x D 2100 mm - Weight approx. 3900 kg - with: - pointed rail + lower beam rail - E - Footswitch
KRAMER UTS 4.1 TABLET TESTER Tablet testing system for checking the hardness, thickness, diameter and weight of tablets. Sold for parts. Built in 2000. CHARACTERISTICS - Precision balance: Sartorius WZ64S (with scale: 10 - 50 g; Unit: mg / 0,5 mg / 0,1 mg (adjustable) - Sampling can be triggered either in the production machine or via the TTS11 software PRODUCTION - Tablets shapes: round, oval, square and oblong tablets, special shapes (for delicate oblong tablets, the proven oblong centring system (OZB) can be integrated) ENERGY CONSUMPTION - Tension: 100/240 V, 50Hz/60 Hz, 4 A
Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg
Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm
Gr. Working width: 1530 mm for sheet metal up to: 2.5 mm opening width upper beam: 290 mm adjustable beam: 90 mm upper cheek drive: 1,1 kW under cheek drive: 3 kW Backgauge: Yes Weight: 2200 kg space requirement: 800 x 3000 x 1380 mm
Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-
Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used
Height=1.78 m, Overall length= 2.3 m, Overall width= 1.4 m, Net weight= 1610 kg,
Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023.
Conveying height 518 mm Inlet height approx. 500 mm Outlet height approx. 500-630 mm Tablet diam. 3-25 mm Deduster path total length 7 m Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h Inlet adapter with nozzle diam. 50 mm Programme control C810 Metal check Ceia THS/PH21N with its own HMI Bad ejection into glass container Drive 100-240V/50/60Hz Spigot for dust extraction Mobile
plate thickness: 3 mm Bending Angle: 165 ° : dreiphasig total power requirement: 380 V - 10,5 A 50 HZ weight of the machine ca.: ca. 3.900 kg dimensions of the machine ca.: B 2400 x L 4300 x H 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 2 mm : 90 mm adjustable bending rolls: 90 mm : 2 kw : 5 mm weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Folding machine KRAMER type A-toll. II 1000 Fabr. No. 48 287 Year of construction 1990 Useful length 1060 mm Max. sheet thickness 3.75 mm Stroke of the upper beam 180 mm Adjustability of the bending beam 60 mm Back gauge 480 mm Drive power of bending beam drive 4 kW Drive power of upper beam drive 1.5 kW Power supply 400 volts, 50 Hz - manual and semi-automatic control - angle adjustment via angle selector- one-piece pointed rail 135 - Back gauge with hand crank adjustment and simple measurement scale - continuous stop rail - electric foot switch, 3-fold space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 ton. good condition; used
Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper beam opening approx. 60 mm Bending beam adjustment approx. 0-25 mm Bending angle 0-180 - Upper beam adjustment via hand crank - Pre-screw rail for the bending beam - One-piece sharper rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used
Beading machine KRAMER type SBMM 56 Fabr. No. 20417 Year of construction approx. 1980 Material thickness 1.25 mm Roller center distance 58 mm Roller diameter 60 mm Shaft journal 24 mm Shaft diameter 39 mm Projection 130 mm Motor power 0.75 kW Mains connection 400 volts, 50 Hz - electric foot switch for clockwise and counterclockwise rotation - adjustable stop with wear plates - various rollers Dimensions L x W x H 700 x 350 x 1200 mm Weight 170 kg Good condition; used
Conveying height 518 mm Inlet height approx. 500 mm Outlet height approx. 500-630 mm Tablet diam. 3-25 mm Deduster path total length 7 m Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h Inlet adapter with nozzle diam. 50 mm Programme control C810 Metal check Ceia THS/PH21N with its own HMI Bad ejection into glass container Drive 100-240V/50/60Hz Spigot for dust extraction Mobile
Height=1.2 m, Overall length= 0.8 m, Overall width= 0.6 m, Net weight= 1390 kg,
sheet width: 3050 mm plate thickness: 2,5 mm arm length: 100 mm table width: 300 mm total power requirement: 7,5 kW machine weight ab.: 2500 kg dimensions: 3800 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate thickness: 2,5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Swing bending machine KRAMER type A toll. II 1000 Fabr. No. 48 287 Year of construction 1990 Usable length 1060 mm sheet thickness 3.75 mm Stroke of the upper cheek 180 mm Adjustability of the bending cheek 60 mm Backgauge 480 mm Drive power Bending cheek drive 4 kW Drive power Upper cheek drive 1.5 kW Mains connection 400 Volt, 50 Hz - manual and semi-automatic control - Angle adjustment via angle dial - one-piece pointed rail 135 - Backgauge with hand crank adjustment and simple dimension scale - continuous stop rail - electric foot switch, 3-fold space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 ton. good condition; used
Beading machine KRAMER type SBMM 56 Fabr. No. 20417 Year of construction approx. 1980 Material thickness 1.25 mm Roller center distance 58 mm Roller diameter 60 mm Shaft journal 24 mm Shaft diameter 39 mm Outreach 130 mm Motor power 0.75 kW Mains connection 400 Volt, 50 Hz - electric foot switch for clockwise and counterclockwise rotation - adjustable stop with wear plate - various rollers Space requirement L x W x H 700 x 350 x 1200 mm Weight 170 kg good condition; used
Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used