used LIEBHERR for sale

3 x Liebherr G9512 Natural Gas Generating Sets Hours: 0 Scope of Supply: Engine, Alternator, Base Frame, Control Panel (MOTORTECH), Gas Line, Radiator, Exhaust. These sets are electricity only but can be adapted to work as CHP units. Please check our full range of equipment at gasengineexchange.com.

2G Agenitor 412 Biogas Generating Set Model: 2G Agenitor 412 Capacity: 569kW Fuel: Biogas Year: 2017 V: 400 HZ: 50 Hours: 9,000 Scope: Engine, Alternator, Base Frame, Control Panel, Gas Line.

1 used concrete mixing plant Manufacturer: Liebherr Type: Betomix 1.0 Year of construction: 2006 Capacity/h : 60 m³/h compacted concrete Aggrgate inline silo: 120m3 (4 x 30 m³) Mixer: Liebherr ring pan mixer 1.0 Dosing: Aggregates: by weighing belt Cement: cement scale Water: water dosing hopper, Admixtures: Chemical scale / chemical dosing device Control container: include control system: SIMMA silos: 3 X 100to (Transport dimension D=3m, feet can be unscrewed) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale IT IS FORBIDDEN TO COPY OR PUBLICATE THIS OFFER BY ANY THIRD PARTIE OR THIRD PERSON

Liebherr slide-in gearbox from stock as good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

1 piece used MOBILE CONCRETE BATCHING PLANT In TOP condition Liebherr - Compactmix 1.0 Year of construction 2021 Power (at mixing time 30 seconds): for fresh concrete (compacted): 60m3/h Fresh concrete: (at compaction factor v = 1.25) 75m3/h Mixer: Liebherr –1.0 R/RIM Ring plate mixer with agitator system Additive scale Cement Scale water dosing hopper Row silo as compartment batcher 4 X 10m3 Cement silos 2 x approx. 50 tons Control fully automatic Dorner batch / Eletrosigma Installed in a container Additive storage Installed in a container Heating system Liebherr The concrete batching plant is in a technically maintained and fully functional condition. Location: Austria Available: IMMEDIATELY Price: on request Offer and prices are purely net from location Subject to prior sale, errors and/or misrepresentations excepted, without warra ...

ID3542 6 piece Liebherr Overhead crane / Hallenlaufkran year/Year of construction 1976 overhead travelling cranes, load capacity 20,000 kg, span 20.2 m, lifting height 10.0 m, wheelbase 4.0 m Overhead crane, load capacity 20,000 kg, span 20.2 m, lifting height 10.0 m, wheelbase 4.0 m

ID3517 Liebherr PR731 C-L year/Year of construction 1990 15.8 t Bulldozer with blade and rear ripper, undercarriage good Bulldozer with blade and rear ripper, drive good

Liebherr WK 4677 Grand Cru Wine Cabinet The Liebherr wine cabinet GrandCru WK 4677 ( body in Tinto ) is intended for the long-term storage of larger quantities of wine. This is done on stable wooden shelves. The interior can be set to a temperature between +5ºC and +20ºC by means of the electronic control with digital display and then reliably maintains it. The cooling system is dynamic and has visual and audible warnings in the event of a malfunction or an open door. Liebherr Wine Cabinet Grandeur WK 4677 Noise-to-sound power 41 dBA Activated carbon filter Door hinge can be changed Visual and audible alerts Dynamic cooling system Temperature between +5ºC and +20ºC Digital readouts Electronic control Wooden shelves Case in ink Gross capacity: 462 l Dimensions: HxWxD 1855 x 660 x 671 mm More items - new and used - can be found ...

For sale: a reliable 2006 Liebherr A924B Litronic material handler. The machine has 25,000 operating hours and is powered by a 127 kW, 4-cylinder Liebherr diesel engine. The engine underwent a full service in September 2023 and received a new cylinder head gasket. Equipped with an air-conditioned cab, a 12-meter boom reach, and a 550-liter, 5-tine Minelli polyp grab. Key features: Year of manufacture: 2006 Operating hours: 25,000 Engine: 127 kW Liebherr diesel (serviced in 2023) Boom reach: 12 meters Equipment: Air-conditioned cab, 550-liter Minelli polyp grab

This Liebherr A924B Litronic material handler is a robust and reliable machine, perfect for a variety of heavy-duty applications. Equipped with a powerful 4-cylinder Liebherr diesel engine, it delivers 127 kW of power, ensuring efficient operation. The 12-meter boom provides excellent reach, while the Minelli MPV 550/5 5-finger grapple allows for versatile material handling. Ready for immediate transport. With 25,000 operating hours, it has proven its durability and performance. Ideal for scrap yards, recycling facilities, and other industrial applications.

For sale is a LIEBHERR - Hydraulic wheeled excavator type A916 Litronic - BJ 2020 in good condition. The new price at that time was € 234,430.00. The excavator is currently still at our customer's site near Magdeburg, is currently still in use and is being sold due to restructuring. Specifications: Manufacturer: Liebherr Type: A916 Litronic Series: 1183 Year of Make: 2020 Engine: 4 cylinder diesel engine, 115kw/156 hp, displacement 4.5 i Ab. Total weight: 18000 kg Ab. Front axle load: 8000 kg Ab. Axle load rear: 11500 kg Only the offered machine and described accessories are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty. The offers are subj ...

Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including control cabinet.

Was intended as a replacement engine for CHP but was not needed. Subject to prior sale - errors possible! Internal reference number: E-1186

max. module: 12 mm max. workpiece diameter: 1200 mm workpiece width - max.: 540 mm min. number of teeth: 12 Work piece table diameter: 1075 mm Workpiece table bore: 200 mm speeds: 29-174 U/min total power requirement: 23 kW weight of the machine ca.: 17,2 t dimensions of the machine ca.: 5050 x 2940 x 2770 m Accessories/ equipment: - change gears - Milling arbors - operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 100 mm max. module: 8 table diameter: 400 mm workpiece diameter: 600 mm strokes per minute: 80-1200 Hübe/min Feed radial axis from - to: 1 - 3750 mm/min angle adjustable from - to: - 0,5 / + 0,5 Grad Accessories: - Various tool holders - Various clamping devices - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 weight of the machine ca.: 10.000 kg dimensions of the machine ca.: 6500x 2700x 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Module size: 5mm, max. workpiece diameter: 180mm, axial travel: 400mm, shank travel: 200mm, milling cutter diameter: 150mm, tool speed: 2250rpm, table speed: 250rpm, max. tool clamping length for bore milling cutter/end milling cutter: 236mm/360mm, control: Liebherr PC-NC. Documentation available. On-site inspection is possible.

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

The 2020 Liebherr L 538 is a versatile mid-range wheel loader designed for various applications in construction, agriculture, and material handling. It offers a balance of performance, efficiency, and operator comfort. Find more here - / Contact us at -

fire: Liebherr, model: A924 B Litronic, Speed at max. torque: 2000 rpm, Operating hours: 16500 hours, Year of construction: 2006

fire: Liebherr, model: A312 Litronic, Operating hours: 11500 hours, Year of construction: 2001

in 40 silenced container, 7500 hours since overhaul, KWe: 240, Working hours: 7500

Year of manufacture 1992, with radio remote control and accessories, see appendix for data sheet, radius: 36 m at 800 kg, load capacity 4000 kg, hook height: max. 26 m

max. wheel diameter:200 mm max. module:7 weight of the machine ca.:15 t table turning speeds:100 U/min table diameter:180 mm hob turning speeds:750 U/min max. hob diameter:160 cutter length max.:230 mm Available from end of 2025

max. wheel diameter:280 mm max. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/min tool length:210 mm CBN

max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing

max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:80 mm max. module:3 total power requirement:25-35 kW weight of the machine ca.:10 t workpiece weight:15 kg workpiece length - max.:-50+450 mm table diameter:145 mm diameter of hob:90 mm cutter length max.:220 mm hob turning speeds:1.000 U/min

max. wheel diameter:180 mm max. module:5 min. module:1 weight of the machine ca.:14 t dimensions of the machine ca.:4,5 x 2,84 x 2,8 m min. number of teeth:7 toolpiece turning speed range:4000-10000 U/min tool length:210 mm With tail stock No dressing device Only CBN

max. ram stroke: 100 mm table diameter: 400 mm workpiece dia.: 600 mm Shockable standard module max.: 8 mm angle adjustable from - to: -0,5 / +0,5 Grad stroke range: 80-1200 Hübe/min Feed radial axis from - to: 1 - 3750 mm/min Accessories: - Various stop blade holders - Various clamping devices The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 27 t max. wheel diameter: 2200 mm : 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: . mm gear width: . mm max. module: . min. module: total power requirement: kW weight of the machine ca.: 7000 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.