used MAKINO for sale

CNC controller: FANUC FS31iA5 Axes X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Rapid traverse m/min: 50 B-axis degrees: 360° (0.001°) Worktable Number of pallets: 2 Table dimensions mm: 630 x 630 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 35/25 kW (15 min/cont.) Spindle torque Nm: 488 Tool system Tool holder: HSK - A100 Tool magazine slots: 97 Max. Tool Diameter: 300 With occupied neighboring places mm: 100 Max. Tool Length mm: 690 mm Max tool weight kg: 30 Cooling Cooling through the Spindle Center bar: 30 Tank capacity: 955 L Equipment Chip conveyor Signal lamp Tool breakage probe Workarea light Air filter unit, for drying and oil separation of the supplied compressed air Internal coolant supply Machine running times Under power: 60.802 Spindle Wor ...

-n°1 horizontal milling machine and carousel, brand Makino, mod. A55E, year 2000, matr. 80.4306.0009. Refrigerant circuit board defective, to be replaced

CNC controller: Fanuc CNC Professional 3 Axes X-axis travel mm: 730 Y-axis travel mm: 650 Z-axis travel mm: 730 B-axis degrees: 360 (1º index) Rapid traverse m/min: 60 (X, Y, Z) Distance spindle nose - table surface mm: 70-800 Worktable Number of pallets: 2 Table dimensions mm: 500 x 500 Max. workpiece weight kg: 700 Spindle Spindle speed rpm: 20-12.000 Tool system Tool holder: HSK-A63 Tool magazine slots: 60 Max. Tool Diameter: 70 Max. Tool Length mm: 360 Max tool weight kg: 12 Equipment Floor grids Machine running times Under power: 78.407 Spindle Working: 26.825 Basic machine dimensions / weight Length mm: 4.800 Width mm: 2.800 Height mm: 3.000 Weight kg: 9.900

Control (Fanuc) MGF 2 Travel x/y/z 300 mm / 250 mm / 250 mm Table length / table width 500 mm / 350 mm Tool changer with 16 positions (Erowa clamping system) Max. workpiece weight 500 kg Dimensions of the machine L/W/H approx. 2.8 m / 2.2 m / 2.3 m Machine weight 4.1 t Accessories: Handheld control unit FPB-ED

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travels: 1200mm/700mm/650mm, table dimensions X/Y: 1550mm/650mm, torque: 410Nm, control: Heidenhain 426. On-site inspection is possible.

Manufacturer: Makino Model: A92 Year of Manufacture: 2007 Electrical Specifications - Operating Voltage: 400 V / 50 Hz (3-phase) - Maximum Current: 115 A - Cable Cross-Section: 70 mm² Cu - Main Supply Fuse: 160 A Coolant: Through spindle Table Size: 800 x 1000 mm Travel Dimensions: - X-axis: 1520 mm - Y-axis: 1250 mm - Z-axis: 1350 mm Tool Magazine Capacity: 99 tools Spindle Speed: 10,000 RPM Spindle Type: HSK-100A Chip Handling: Chip conveyor and filtering Automation: Crane storage interface (Fastems) Machine Weight: 33,000 kg Find more here - / Contact us at -

This MAKINO EU64 Erosion machines machine was manufactured in 1999 in Japan. It is operated through a MAKINO MGW-N control unit. This 5 axis machine can work with a workpiece weight 1500 kg.

This 4-axis Makino A61-5XR was manufactured in 2005. This horizontal machining centre is equipped with a Fanuc / Pro5 control, has a table size of 500 x 500 mm, and a stroke of 730 x 650 x 730 mm. It features table indexing at 1° and an ATC with 134 positions, handling a maximum workpiece weight of 700 kg. Contact us for further details regarding this machine.

This 4-axis Makino A99-A132 horizontal machining centre was manufactured in 2000. It features a robust HSK 100 spindle, capable of 12,000 rpm and a maximum torque of 380 N/m. The machine offers extensive travels with 1000 mm on both X and Y axes, and 950 mm on the Z-axis. It supports a hefty 1800 kg on its 800x800 mm table. Ideal for complex, heavy-duty machining, the Makino A99-A132 machine we have for sale. Contact us for further details.

This 3-axis Makino V55-A15 vertical machining center was manufactured in 1998. It features a CNC FANUC PROFESSIONAL 3 control system, a table size of 1000 x 500 mm, and a spindle speed of up to 15000 rpm. X, Y, Z travels are 900, 500, and 450 mm respectively. Includes a conveyor. If you are looking to get high-quality milling capabilities consider the Makino V55-A15 machine we have for sale. Contact us for more information.

This 3-axis Makino S56 vertical machining center was manufactured in 2009. If you are looking to get high-quality milling capabilities, consider the Makino S56 machine we have for sale. Contact us for more information.

This 4-axis Makino A61nx horizontal machining center was manufactured in 2015. It features a robust spindle with speeds up to 14,000 min-¹, a torque of 240 Nm, and a power of 30 kW. The machine includes a high-capacity tool magazine with storage for 60 tools and rapid tool change times. Ideal for heavy-duty machining with a pallet size of 500 × 500 mm and maximum workpiece weight of 700 kg. For more information about this horizontal machining center, please reach out to us.

This Makino F5 Vertical Machining center was manufactured in the year 2013 in Singapore. It is equipped with a Fanuc Series FS31i control unit. The machine has a spindle speed of 200-20000 rpm.

This Makino D500 Vertical Machining Center was built in Japan in the year 2008. This 5 axis machine works with a CNC controller Professional 5 control unit and a spindle speed of 14000 rpm. It also has a pallet changer with 4 pallets of dimensions 300 x 300 mm, cooling through the spindle and Renishaw for tools and parts.

This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information.

This 4-axis Makino A99-A188 was manufactured in 2001. A robust horizontal machining centre featuring a Fanuc 16iM controller, 800x800mm pallet size, and a comprehensive tool magazine with 188 positions. It supports a maximum workpiece size of dia 1100 x 1200mm and offers rapid traverse rates up to 50,000 mm/min. If you are looking to get high-quality milling capabilities consider the Makino A99-A188 machine we have for sale. Contact us for further details regarding this machine.

This MAKINO a120nx Horizontal Machining center was manufactured in the year 2017. It is equipped with a Makino CNC Professional 6 control unit and has 3 axis. The machine has a spindle speed of 20-8000 rpm.

This 5-axis Makino U6 HEAT wire EDM machine was manufactured in 2020. It features a standard 4-sided hardened worktable, a high-efficiency wire guide system, and dual high flow rate pumps. With a maximum workpiece size of 1000 x 800 x 400 mm and a weight capacity of 1500 kg, its ideal for high-speed machining of low-flush applications. If you are looking to get high-quality EDM capabilities, consider the Makino U6 HEAT machine we have for sale. Contact us for more information.

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

EDAF-3 precise machining machine, ATC 32EA , XYZ Scale, Erowa chuck, micro machining circuit - Dimensions (long x wide x high): 2.314 x 3020 x 2660 mm - Working area (X x Y x Z): 850 x 650 x 400 mm - Max. electrode weight: 60 kg - Weight: 4.800 kg - Max. workpiece weight: 800 kg - Work table size (width x length): 700 x 500 mm - Control: Control CNC

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 30 - Control: CNC - Max. workpiece weight: 17.600 kg - Max. tool weight: 66 kg - Axes: 4 - Weight: 77.175 - Dimensions (long x wide x high): 1.501 x 1.300 x 1.000 mm