used MARTIN for sale

Martin T60C Sliding Table Saw Brand Martin Type T60C M-No.: V482223 Year of Make: 2008 Control panel: touchscreen integrated at eye level in the extraction support 2-axis control (saw height, inclination, cutting width with handwheel adjustment but with digital readout of the cutting length in the screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivel: 0° - 45° Speed control: 4,000/4,800/6,000/tpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 850 mm, handwheel adjustment with readout in the screen and +/- 0.05 mm accuracy Table: galvanized steel with fixed-angle stops 0º, 22,5º, 30ºen 45º. Dimensions: 1,340650mm Length stop: 2,200 - 3,300 mm with analogue readout, folding latch with magnifying glass Suction: Top: ø100 mm, Bottom: ø120 mm Weight: 1,400 KG

MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: ProLock quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic: mi ...

MARTIN T90 Four-sided crane with NC control and 6 spindles and swing axle (Left3) Specifications: Brand: MARTIN Type: T90 with 6 spindles incl. pendulum axle (left 3) Year of Make: 2023 A1 - Refurbished and Repainted M-No.: V239722 Operating hours: 5,962 hours Feed table: 2000 mm Table height adjustment: Max. Spahn name 10 mm Stop bar: Manual adjustment 10 mm Planing width: 22 - 260 mm (profiling width top 4 is 260 mm, spindle 5 & 6 is tool dependent) Planing thickness: 5 - 160 mm (profiling width right/left is 160 mm, spindle 5 & 6 is tool dependent) Planing shaft: 1st spindle, with max. 10 mm decrease, 260 mm, flight circle min. ø100 mm - max ø125 mm Calibration planing and contour shafts: 2 & 3 spindles (vertical spindles) max. 10 mm, clamping length 160 mm, flight circle min. ø100 mm - max ø125 mm Thickness shaft/upper shaft: 4th top spindle  ...

Martin T43 Thickness Planer Brand Martin Type T43 M-No.: V144097 Year of manufacture: 1986 Main motor 7.5 KW (10 PK) - 400 V Speed 5,000 tpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 630mm Planing thickness 2 - 250 mm Spahn removal max. 8 mm Thickness table length 1,100 mm Feed rate 6-18 m/min. Weight 1050 KG

MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm

Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...

Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change  ...

Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table  ...

Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...

Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...

gebr. Thickness planing machine MARTIN T43 Built in 1987 Motor power: 5.5 kW (rated current: 14.0 A) 2-Knife Shaft Strip Planer Knife Max. planing width: 630 mm max. planing width:250 mm 4 feed speeds: 6 / 9 / 12 / 19 m/min electr. Height Height display via counter Rubber Feed and Pull Out Roller (Pull Out Roller New) Engine brake Extraction connection: 160 mm incl. adjustment gauge All V-belts renewed Weight: approx. 1,050 kg

Equipment/Technical data: - Motor power: 7.5 kW - Speeds: 3,000, 4,000, 5,000, 6000, 8000, 10,000 rpm, speed change by belt reversal / pole shift - Milling spindle: DornFix quick-change system, steep taper SK 40 (Ø 30 x 140 mm) - Spindle stroke: 125 mm - Milling stop: adjustable by handwheel with digital display, with swivel device - Stop ruler (right): adjustable by handwheel with digital display - Tool diameter: max. 250 mm in the milling fence / max. 350 mm in slotted hood (speed limited to 4800 rpm) - Table extension on both sides (length approx. 2,405 mm), with extendable workpiece support (length approx. 3000 mm), 700 mm extendable - Stop for insertion milling - Centrex Guard - Maintenance equipment: Oil central lubrication (oil flow regulator) with manually operated pump - Extraction nozzle: at the milling fence and under the table each Ø120 mm, minimum extraction  ...

Equipment/technical data: - Control panel at eye level, swivelling - electr. Adjustment of spindle height and angle (digitally displayed) - Solid table extension with extendable support on the right side - 3-roller feeder - Stop with digital indicator - Swivel device for stop - Max. tool Ø Milling cutters / slitting tools 250 / 350 mm - Motor power 7.5/9.5 kW - Speed 3000/4500/6000/9000 rpm - Voltage 400V, 50Hz, 3~ - Rated current 25 A

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

gebr. Swivel spindle milling machine MARTIN T26 Year 1999 Motor power 5 / 6 kW (rated current 19A) Swivel range: - 45° to + 45° Max. tool diameter: 250 mm Max. slitting tool diameter: 350 mm Speeds: 3 / 4.5 / 6 / 9,000 rpm electr. Heights and swivel adjustment Top control panel Swivelling control panel Displays and control buttons at eye level 30 mm Dornfix Spindle Quick Change System with Torque Wrench (SK40) Milling fence with digital position display Swivel device Centrex Guard Aigner integral stop (each 650 mm long) Support for feed pickup: Electric height adjustment of the feed Altitude display (scale) Integrated swivel device for feed Switching the feed on and off on the control panel Table widening left + right Pull-out workpiece support with integrated emergency stop switch Electro-pneumatic spindle locking electr. Switching the direction  ...

Robust T 26 swivel milling machine swivel from -45 to +45 degrees with 2-axis positioning control Duocontrol Swivel milling machine in very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench Electrically adjustable stop, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of the height and stop Stop with lifting device can be swi ...

Martin T60 sliding table saw 3-axis scorer Stroller 330cm Tilt and up-down motorized Motorically adjustable culaga, max 125cm saw max 400mm, min 250mm 3 rotation speeds

5.7-inch touchscreen control Electric lift-up and take-off Save settings Stepless adjustment of the stop Spindle 30 mm, and second spindle 32 mm Spindle stroke 150 mm Speed control from 3000 – 10000 rpm Spindle motor 7.5 KW Extendable entry and exit tables Extendable front support +/-86 cm, length 290 cm Total length of tables 220 cm, 2x extension 56 cm 4-roller tilt conveyor with base frame Infinitely variable regulation of the feed speed

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

Sliding table saw Martin T 60 Heavy precision sliding table saw Axis Positioning Control 5.7 Touch Screen Car. Scoring unit Motor 5.5 kW Saw blade tiltable 0 - 46° Saw blade diameter up to 400 mm Trimming length 3000 mm Cutting width with rip fence 1250 mm Width stop adjustment automatically via NC control Reading width stop via touch screen Swivelling control panel above table CE version Machine is WORKSHOP OVERHAULED in TOP CONDITION from stock Lieboch

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Integral stop (Aigner) 650 + 650 mm (new unused Aigner stop) Swivel device for mil ...

Table milling machine Martin T26 heavy table milling machine Swivelling control panel above table 4-roller feeder Milling fence with digital display Electr. Adjustment of milling height and milling angle/LED displays Electro-pneumatic spindle lock Sliding table can be swivelled on both sides -45°, can also be used as a table extension Motor approx. 5.5 kW swivelling milling spindle +/- 45.5° CE version Machine in EXTREMELY NEAT CONDITION from carpentry dissolution - craft business ex location

Surfacer planer, Martin T 54 dressing machine with Tersa shaft and motorized adjustment of the chip removal Planing width max. 510mm max. chip removal 8mm Motorized adjustment of the planing strength Drive motor 5.5kW with automatic motor brake 2-knife shaft Tersa with new knives Planed casting tables slit table lips Low-noise design Swivelling stop with fold-down auxiliary stop Suvamatic planing shaft cover, built in 1997 Suction nozzle 160mm Emergency stop Paintwork touched up in places V-belt renewed New knives CE mark Machine is from a vocational school Dimensions approx. 2850 x 850 x 1100mm (LxWxH). Weight approx. 1100kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see other offers of this supplier.

Aigner, 4 R feed

Martin T 60 Classic sliding table saw Heavy precision sliding table saw Axis Positioning Control 5.7 Touch Screen Car. Scoring unit Motor 5.5 kW Saw blade tiltable 0 - 46° Saw blade diameter up to 400 mm Trimming length 3000 mm Cutting width with rip fence 1250 mm Width stop adjustment from the front by means of a handwheel on precision guides Reading width stop via touch screen Swivelling control panel above table CE version Machine is WORKSHOP OVERHAULED in TOP CONDITION from stock Lieboch

Equipment: - Trimming length 3300 mm - Cutting width 1050 mm - Cutting height above hydr. Foot pedal adjustable - Saw blade Ø 200-450 mm - Scoring saw unit - Parallelogram protective cover - Speed 2800 / 4000 / 5000 rpm, manually adjustable via belt flip - Motor power 7.5 kW - Electrics: 380 V, 50 Hz, 3~, 18.0 A

Table dimensions: 1.700 x 750 mm mm Motor output: 7,5 kW Spindle diameter: 30 / 40 mm reus: 1500/3000/4500/6000/9000 U/min Weight: 680 kg : -45° bis +45° height adjustment: 100 mm : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Dimensions (L/W/H): 115x110x120 mm turning speeds: 5000 U/min connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 500 mm internal diameter: 150 mm : 3 adjustable: ja mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: bed bridge: ja : 579 mm centre distance: 2200 mm weight: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickened MARTIN T 42 -used-new rubber feed roller, rubber pull-out roller, link pressure bar, stepless feed---------- Technical data ----------planing width: 630 mm, number of knives: 4 pieces, passage height: 250 mm, feed speed: 8-20 m/min., suction nozzle Ã: 160 mm, weight: 870 kg

Table milling machine MARTIN - used-finely adjustable milling fence, clockwise/counterclockwise rotation ---------- Technical data ---------- table size: 1,000x930 mm, work table height: 860 mm, spindle diameter: 40 mm, useful length milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, speeds: 3,000/4,500/6,000/9,000 rpm, motor: 4.7/5.7 kW, extraction nozzle Ã: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

This Martin T72 table saw was manufactured in 1989. Ideal for woodworking, it offers reliable performance for precision cutting. Consider the opportunity to buy this Martin T72 table saw. Contact us for more information.

Martin 924 Midline, Year 1998 -, Prefeeder Martin, Year 1998, Max.Size: 2400x900 mm, Vacuum Feeder, 3 Flexo Print Units bottom print – Year 1998, Automatic Slotter, Rotary Diecutting unit, Folder gluer with Multi T System, Glue system - Valco, Counter Ejector, Mosca strapping machine, year 2016, Paletizer: ALLIANCE – ALFMAX, Panuc Robot

working width: 630 mm; working height: 220 mm; cutter head: strip knife; number of blades: 4; height adjustment: manual; read out workpiece thickness: Scala; feed speed: variabel ; infeed roller: rubber; outfeed roller: rubber; table roller: no; motor power: 5,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1000kg;

spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine

Carriage length: 2700 mm; Cutting width at the width stop: 1250 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 170 mm; Spraying device for aluminum and plastic processing: Yes; Scorer: no; Height adjustment saw blade: electric / position control; Swivel adjustment saw blade: electric / position control; Adjustment width stop: electric / position control; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display Width Stroke: Digital Display; Display cutting ruler: Scala; Saw blade diameter: 500

Table dimensions: 800 x 1.780 mm Motor output: 5/6 kW Spindle diameter: 30/40 mm reus: 3/4,5//9 U/min Weight: ca. 1.100 kg : Ja : Ja : Elektrisch swivellable: -5° bis +45° ° : Elektrisch tool taper: MK 5 height adjustment: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 500 mm internal diameter: 150 mm : 3 adjustable: ja mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swivelling, boom table, front table, hydraulic height adjustment, hydraulic swivel adjustment, digital display of the swivel angle, speed display, angle mitre stop, upper protective cover narrow and wide, automatic brake ---------- Technical data ---------- swivel range: 0-45.3 , carriage length: 2,700 mm, cutting length: 2,800 mm, cutting width: 830 mm, cutting height: 140 mm, max. saw blade: 450 mm, Cut-to-length stop extendable up to: 3,330 mm, speeds: 2,800/4,000/5,500 rpm, motor power: 5.5 kW, work table height: 880 mm, extraction nozzle: 120/80 mm, dimensions (LxWxH): 3,000x1,600x1,500 mm Sale in actual condition, without technical inspection