43 MOEHRINGER used machine for sale

Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display

Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)

Clamping carriage SWVH1K - Used, factory refurbished Bearing No.: asw875 Make: Möhringer Year of construction: 1994 Machine number: 9401 Part Number: 96900008 Specifications: Gauge: 980 (mm) Support height: 430 (mm) Clamp opening: 800 (mm) Plier rotation: 360° hydraulic Travel drive: hydraulic Travel speed: forward and backward 100 (m/min.) Drive power: 4 (kW) Overall length: 3,200 (mm) Weight approx.: 1,350 (mm) Type of control: remote controlled

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty

Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty

achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.

Complete gate system Sagegatter mohringer oss71 with bv built in 1989 read through 710mm hub 500mm hydraulic sagespanner remote-gesteurchipwagen spe's round wood on givee rolengang with mechanicization

Tension and help wagon Möhringer Gate OSS 71 BJ.: 1982 with j voltage 45kW Hub 500 Riving knife with compound miter saw

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW

Frame width: 710 x 750 mm. stroke. 500 mm. speed: 300 RPM. Feed hydraulic stepless from 0-12 m / min. Hydraulic roller lift with adjustable roller pressure. Automatic overhang adjustment. Electric Zentralschnmierung. Hydr. Double yoke saw clamp with Hydr. Pump. Cutting unit with Bay fishing. Motor direct drive 90 KW - 740 RPM. Hydr. Quick clamping cars full hydraulic with electro hydraulic. Help car. 92 Gates was overtaken in 1997.; Good

Technical data: 6 kW Type: 233 407 00

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller  for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end

Axle distance: 9.0 m Strands: 5 stk (80/80/1,20/1,80), horizontal Used for: Boards/Schwarten Model Logs Design: horizontal Upgrade plated out 5 sprockets with special gear motor 5.5 hp

Track gauge: 980 mm Support height: 430 mm Drive: 0.37 kW - reinforced design - with tipping stool and circeaching roller chain for model - with a hydr. tilting and movable trough smelter provided with chains

Technical data: total length: 9.7 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Technical data: intended purpose: Planks Achsabstand: 2 m rope number: 4 pieces impulse achievement: 4 kW chain division: 125 mms lax strength: 40 x 10 mms

Spurt width: 980 mms edition height: 430 mms impulse: 0.37 kW auxiliary carriages in reinforced execution with Kippschaemel and running around role chain for model, with a hydraulic tiltable and adjustable Muldenschaemel for round timber, including cables and cable balance.

Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.

- 1.2 m wide - approx. 2.75 m long - from 0.5 to 1.1 m upward

technical data: Make: Möhringer Type: Drive set Types No.: 124000-1 Track gauge: 980 mm Total length: 1430 mm Power: 2.2 kW

technical data: Make: Möhringer Type: Drive set Types No.: 124000 Track gauge: 980 mm Total length: 1430 mm

technical data: Make: Möhringer Type: for block pull kW: 5 kW Rpm: 34 rpm, 40% ED Shaft diameter motor: 50 mm

technical data: Type: KW 1 vek Types No.: 126 200 Track gauge: 800 mm Support height: 410 mm Wheel diameter: 180 mm With electric side adjustment