used MORI SEIKI for sale

Inv. Num. : 7790 Type: SL-4T Producer: MORI SEIKI Created: 1984 Parameters: Control system: FANUC 6T Maximum turning diameter over bed: 490 mm Maximum turning diameter over support: 320 mm Maximum spindle speed: 3000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 5500 kg Equipment: Conveyor

Mori Seiki NL1500SY/500 CNC Lathe w/ Y-Axis and Subspindle Mori Seiki NL-1500SY/500 CNC Turning Center New: 2007 Specifications (To Be Verified By Buyer): Max Cutting Diameter: 14 Max Cutting Length: 20.2 X-Axis Travel: 10.2 Z-Axis Travel: 23.2 Y-Axis Travel: 3.9 C-Axis Indexing: Full C-Axis Spindle Speed: 6,000 RPM (Main/Sub) Spindle Motor: 15 HP (Main/Sub) Spindle Nose: A2-5 Spindle Bore: 2.4 Bar Capacity: 2 Live Tooling Speed: 6,000 RPM Tool Capacity: 12 Station Equipped With: MSX-850III Control Y-Axis Live Milling, Full C-Axis Sub Spindle 3J Collet Chucks Main/Sub Probing Tool Presetter Parts Catcher Chip Conveyor Coolant System

Drehdurchmesser max. 320 mm Drehlänge max. 810 mm Steuerung MSX 701 IV / MAPPS IV Umlaufdurchmesser über Bett 800 mm Umlaufdurchmesser über Planschlitten 800 mm Abstand zwischen den Spitzen 1.130 mm Standard-Drehdurchmesser 200 mm Hauptspindel: Antriebsleistung - Hauptspindel 25 / 22 kW Gegenspindel: Drehzahl max. 5.000 min/-1 Antriebsleistung - Gegenspindel 25 / 22 kW Max. Drehmoment 358 Nm Spindeldurchmesser im vord. Lager 120 mm Spindelbohrung 73 mm Stangendurchgang 65 mm Spindelnase JIS A2-6 Futterdurchmesser 210 mm Revolver 1: Revolver 2: Revolver 3: Anzahl der Werkzeugplätze 16 pos. Anzahl der angetriebenen Werkzeugstationen 16 pos. Drehzahlbereich - angetr. Werkzeugstationen max. 6.000 min -1 Antriebsleistung - angetr. Werkzeugstationen 7,5 / 5,5 kW Y - Achse 110 (+65 / -45) mm Schaftdurchmesser 20 x 20 mm Schaftdurchmesser der Bohrer 32 mm Rev ...

Specifications: Capacity: Swing over bed Swing over bed with interference from front cover Swing over cross slide Maximum bar capacity Standard turning diameter Maximum turning diameter (main spindle) Maximum turning length Main Spindle: Maximum speed Spindle nose Spindle bearing diameter Spindle through hole diameter Minimum spindle indexing angle (C-axis) Travels: X-axis travel Y-axis travel Z-axis travel Feed Rate: X & Z-axes rapid traverse rate Y-axis rapid traverse rate Tailstock advance/retract traverse rates Maximum jog feedrate of tailstock Turret: Number of turret tool stations Shank height for angled tool Shank diameter for boring bar (main spindle) Rotary tool machining capacity Maximum rotary tool speed Tailstock: Travel Spindle diameter Spindle taper Cutting time Operation time Power On hours 36.22 23.58 29.21 3.15 10 ...

TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 43 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 734 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 41 [kVA] WEIGHT & DIMENSIONS : 1730 - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [ ...

MORI SEIKI 5-axis CNC turning and milling center type NTX1000 SZ TECHNICAL FEATURES: Year: 2011 CNC Type: FANUC MSX-711 IV Number of continuous axes: 5 Maximum diameter Turning Capacity: 370 [mm] Maximum length Machinable: 424 [mm] Y-axis travel: 105 Z1 axle stroke: 460 [mm] X1 axle stroke: 380 [mm] Z2 axle stroke: 610 [mm] X2 axle stroke: 155 [mm] B-axis angular travel: 120 [°] B-axis indexing accuracy: 0.0001 [°] Maximum rotational speed Milling spindle: 12000 [rpm] Milling spindle tool attachment: Capto C5 Maximum power Milling spindle: 9 [kW] Tool Magazine Capacity: 76 Maximum length Tool Size: 250 [mm] Maximum diameter Tool Size: 130 [mm] Maximum weight per tool: 5 [Kg] X1 axis fast feed speed: 40000 [mm/min] X2 axis fast feed speed: 20000 [mm/min] Z-axis fast feed speed: 50000 [mm/min] Z2 Axis Fast Feed Speed: 36000 [mm/min] Y-axis fast feed speed: 40 ...

CNC controller: FS-31IA5 (MAPPS 4) Capacity Turning length mm: 1.542 Max. turning diameter mm: ø: ø660 Swing over bed mm: ø: ø730 Turning diameter f. lower turret mm: ø350 Distance between spindle centers mm: 1.862 Bar work capacity mm: 91 Turn-mill spindle Full indexing specifications: Yes X-axis travel mm: 750 Z-axis travel mm: 1.550+100 (for ATC) B-axis degree: ±180º (0.0001°) Speed spindle rpm: 12.000 Y-axis travel mm: ±210 Drive power kW: 18,5/11 Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0.28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Manufacturer: KITAGAWA Maximun torque Nm: 60kN Counter spindle Speed sp ...

CNC controller: FS-31IA5 (MAPPS 4) Capacity Turning length mm: 1.542 Max. turning diameter mm: ø: ø660 Swing over bed mm: ø: ø730 Bar work capacity mm: 91 Distance between spindle centers mm: 1.862 Turning diameter f. lower turret mm: ø350 Turn-mill spindle Full indexing specifications: Yes X-axis travel mm: 750 Z-axis travel mm: 1.550+100 (for ATC) B-axis degree: ±180º (0.0001°) Speed spindle rpm: 12.000 Drive power kW: 18,5/11 Y-axis travel mm: ±210 Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0.28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Manufacturer: KITAGAWA Maximun torque Nm: 60kN Counter spindle Speed s ...

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

- n°1 horizontal milling machine brand mori Seiki, mod. MH500, year of construction 1997, reconditioning 2005, matr. 923, with cones with attached spindle

Manufacturer MORI SEIKI Model NLX2500SY/700 Month / Year 12/2011 CNC MORI SEIKI M730 BM Capabilities Turning on bed/carriage 590/360 mm. Maximum turnable diameter 460 mm. Maximum turnable length 795 mm. Bar pitch 80 mm. Y-Axis INCLUDED Routes and advances X/Z axis travel 260/795 mm. Y-axis range ±50 mm. B-axis sub-head travel 734 mm. Fast feed X, Z, B axes 30.0000 mm/min Y-axis fast feed 10.0000 mm/min Work progress axes X, Y, Z, B 0-5,000 mm/min Head C-axis in head INCLUDED C-axis indexing head 0.001º Head speed 4,000 rpm Number of head speed ranges 2 Nose type head JIS A2-8 Head passage diameter 91 mm. Main motor power 18.5 kW Sub-header C-axis in sub-head INCLUDED C-axis indexing sub-head 0.001º Sub-head speed 6,000 rpm Number of sub-head speed ranges 1 Nose type sub-head JIS A2-5 Sub-head passage diameter 43 mm. Sub-head motor power 11/7.5 kW M ...

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

Mori Seiki SL 250, Year of manufacture 1998, Control Mori Seiki MSP 501, Turning length approx. 1000 mm, NC Technik gantry loaders up to Ø approx. 100 mm, 1 revolver 12-speed, Spindle speed up to 3,500 rpm, Requested. Tools Sub-spindle, C axis, 2 x three-jaw chucks, 1 x collet chuck, Conveyor rigid holders, Requested. Tool holders,

Mori Seiki ZL 15 SMC, Year of manufacture 1995, Control MSC 516, Turning length 100 mm, Turning Ø over bed 160 mm, 2 turrets 10-speed, Requested. Tools C axis, Spindle speed up to 5,000 rpm, Conveyor

tock-No. 1105-04043 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type NL1500SY/500 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Price Technical details turning diameter 490 mm turning length 515 mm control MSX-850 max. bar capacity 52 mm Travel -X Axis 280 mm Travel -Z AXIS 490 mm max. speed main spindle 6000 min-1 spindle taper 1 A2-6 C - Axis 0.001 ° Spindle bearing diameter 110/75 mm No. of tools in turret 1 12 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm Turret Change Time 0.25 s max. spindle speed driven tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter over face slide 278 mm gre ...

Stock-No. 1105-04024 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type SL 2500 Y /650 Year of manufacture 2003 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Price Technical details turning diameter 490 mm turning length 650 mm control MSX-805 max. bar capacity 65 mm Travel -X Axis 305 mm Travel -Z AXIS 690 mm Travel -Y Axis +50, -50 mm Max. Speed Main Spindle 4000 min-1 spindle taper 1 A2-6 C - Axis 0.001 ° Spindle bearing diameter 120/85 mm No. of tools in turret 1 10 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm Turret Change Time 0.25 s max. spindle speed driven tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter ove ...

GENERAL Project No.: 905722 Quantity: 1 pcs. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year of Make: 2003 Condition: Used machine DESCRIPTION TURN Max. turning diameter 356 mm Max. turning length 655 mm Max. circumferential diameter over bed 520 mm Max. rotation diameter over face slide 250 mm Max. circumferential diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 18 kW Spindle passage main spindle 75 mm Spindle Flange Size Main Spindle A2-8 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Tailstock NC-controlled 1 turret on top Number of stations/powered by 12/12 Speed tool drive 6000 1/min Axles in the turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse speed in X/Y/Z 18/-/24 m/min OTHER EQUIPMENT Tool life monitoring Spla ...

CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Rapid traverse m/min: 60 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Tipo: SJ-2B4351TK Bearing Inner Diameter mm.: 80 Spindle torque Nm: 110 Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Rated power kVA: 38 Basic machine dimensions  ...

YOM: 2003 CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 Rapid traverse m/min: 50 B-axis degrees: 360º (0.001º index) Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1.000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High pressure pump Internal coolant supply

CNC controller: FS-31IA5(MAPPS 3) Capacity X-axis travel mm: 750 Y-axis travel mm: 210 Z-axis travel mm: 1.550 B-axis travel mm: 120 Turning length mm: 1.542 Max. turning diameter mm: ø: 660 Swing over bed mm: ø: 1500 Turning diameter f. lower turret mm: 350 Turn-mill spindle Full indexing specifications: FULL INDEXING SPECIFICATIONS B-axis degree: ±120 (0,001) Speed spindle rpm: 12.000 Drive power kW: 18.5 / 11 Tool magazine Magazine places: 40 Tool holder: CAPTO C6 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Speed driven tools RPM: 12.000 Milling function: Provided Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 26/22 Spindle bore mm: 91 Chuck type: HOLLOW CHUCK (12) Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 4.000 Drive power spindle kW: 26/22

CNC controller: FS-31IA (MSX-701 III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 División estandar Grados: 0.001º Maximum workpiece rotation diameter mm.: 800 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: HSK A63 Bearing Inner Diameter mm.: 40 Spindle torque Nm: 220 Tool system Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Tool Shanks : BT-40 NUMBER OF TOOL OFFSE ...

Brand: Mori Seiki Type: NH4000DCG Control: MSX-701III Year of production: 2007 X: 560 mm Y: 560mm Z: 620mm Pallet size: 400 x 400 mm – 2 pcs. Spindle taper : BT 40

Mori Seiki NHX 5000, Year of construction 2011 / Commissioning 2013, Mapps 2 control, Travel X/Y/Z 730/730/880 mm, Ww 60 speed, SK 40, Spindle speed up to 10,000 rpm, Pallet changer 2-fold, IKZ 50 bar, Conveyor Processing time 7300, max. workpiece Ø 800 mm, max. workpiece weight 700 kg,

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 Turning length mm: 510 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp Tool measuring arm High pressure pump Workarea light 4th axis Interface for Bar feeder Rated power kVA Working time hours Under power: 7456 Spnidle: 5423 Basic machine dimensions / weight Length mm: 3495 Width mm: 2050 Height mm: 2230 Weight kg: 5800

DMG Mori CTX 2500 - 700, Year of construction 2018, Control system Celos Siemens 840 D sl Operate, Center width 705 mm, Bar passage up to 65 mm, Y axis +/- 50 mm, Turret 12 speed - all stations driven, Mounting VDI 40, C axis main spindle, Spindle speed up to 4,000 rpm, Conveyor Package bar machining, Oil mist separators, Accessories Machine A 14200 hours, Spindle A 3200 hours,

CNC-Steuerung: FANUC FS-31iA5 (MAPPS 4) Fähigkeiten Drehlänge mm: 424 Max. Drehdurchmesser mm: ø: 370 (270 with turret 2) Stangenarbeitskapazität mm: 52 DREH-FRÄSSPINDEL Indexierungsspezifikationen: yes Verfahrweg X-Achse mm: 380 Verfahrweg Y-Achse mm: ± 105 Verfahrweg Y-Achse mm: 460 + 155 (ATC) B-Achse Indizierung Gra.: ± 120º Max. Spindeldrehzahl U/min: 12.000 Spindelantriebssleistung kW: 9/5.5 Werkzeugmagazine Werkzeugeplätzen: 38 Werkzeugaufnahme: Capto C5 Max. Werkzeuglänge mm: 250 (210 for tools below Ø70mm) Max. Werkzeugdurchmesser mm: Ø70/Ø130 (with/without adjacent tools) Max. Werkzeuggewicht kg: 5 Untere Revolverturm Verfahrweg X-Achse mm: 155 Verfahrweg Y-Achse mm: 610 Anzahl Werkzeugplätze: 10 Drehzahl max. angetriebene Werkzeuge U/min: 6.000 Angetriebene Werkzeuge Leistung kW: 1,5/1,2 Hauptspindel Max. Spindeldrehzahl U/min: 6.000 Sp ...

Mori seiki MT 2000 multitasking lathe :::TECHNICAL SPECIFICATIONS::: CNC model: Mori Seiki - CNC version: MSC 501 - Spindle nose: ASA 6 - Spindle power: 22Kw Number of main spindle speeds: 6000 - Turning diameter: 540mm - Bar passage: 65mm - Turning length: 1020mm Number of tools: 60 Tool holder: CAPTO C6 Spindle power: 18Kw Number of spindle speeds: 8000 X-axis travel: 565mm Y-axis travel: +-80mm Z-axis travel: 1077mm Swivel B-axis travel: + - 120 ° degrees Fast feeds for linear axes X Y Z: 24m/min High refrigerant pressure: yes Pressure value: 80bar External tank system with filter: yes Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 155mm First turret Z-axis travel: 1067mm Sub-spindle: yes Spindle nose: ASA 5 Number of counter ...

CNC controller: FANUC - MSX-701III Axes X-axis travel mm: 1.400 Y-axis travel mm: 1.200 Z-axis travel mm: 1.350 B-axis degrees: 360º (0.0001º) Distance spindle nose - table surface mm: 100 - 1.300 Feed rates m/min: 50 Rapid traverse m/min: 50 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: 800 x 800 Maximum workpiece size (D x H) mm: 1450 x 1450 Max. workpiece weight kg: 2.200 Drive power kW: 10.8/23.3 (cont./max) Spindle Spindle speed rpm: 8.000 Spindle drive power kW: 37 Spindle torque Nm: 525 Cooling Cooling through the Spindle Center bar: yes Tool system Tool holder: HSK-A100 Tool magazine slots: 60 Max. Tool Diameter 320 With free neighboring places mm: 320 With occupied neighboring places mm: 110 Max. Tool Length mm: 800 Max tool weight kg: 30 Equipment Chip conveyor High pressure pump Spindle active cooling unit (it doesn't come  ...

Turning diameter: 600 mm Turning length: 1075 mm Turret positions: 40 Positions ATC: 12   Number controlled axis: 5   CNC Brand: _Unknown / Other CNC Model: NT3200/1000SZ Multi-tasking lathe MORI SEIKI - NT3200/1000SZ  - 5 Axis simultaneous machining - Swivable Milling-Head (B-Axis) - Subspindle - Lower turret Specifications Metric US Standard Max. turning Ø600 mm X-Axis685 mm Y-Axis125 mm Z-Axis1075 + 130 mm B Axis360.000 ° Spindle bore73 mm Speedrange5000 Rpm Spindle power25 kW Subspindle speeds5000 Rpm ATC / revolver40 B-Axis ToolsystemCapto C5 B-Axis Speedranges12000 Rpm B-Axis power6 kW Positions lower revolver12

Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 800mm/410mm/510mm, table dimensions X/Y: 1100mm/450mm, max. table load: 700kg. Speed: 8000rpm, power: 7.5kW, tool holder: BT40, tool positions: 30, column height: 220mm, rapid traverse X/Y/Z: 20m/min/20m/min/15m/min. Machine dimensions X/Y/Z: approx. 2500mm/2250mm/2800mm, weight: approx. 7500kg, control: MF-M4. Documentation available. On-site inspection is possible.

This 3-axis MORI SEIKI ZT1000Y was manufactured in 2004. It features a spindle hollow of 42 mm and a Y-axis travel of 60 mm. Live tools and an LNS Quick Load Servo 63 are included. Consider the opportunity to buy this MORI SEIKI ZT1000Y horizontal turning machine. Contact us for more information about this machine.

Horizontal machining center Mori Seiki NH8000DCG - 2008

This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2007. A robust horizontal machining centre, it offers advanced capabilities for efficient and precise operations. Ideal for those seeking high-quality machining, this unit represents a significant asset for any production environment. Contact us for more information about this machine.

This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information.

This 4-axis MORI SEIKI NL 2000 SY /500 turn-mill centre was manufactured in 2008. Ideal for precision machining, it features a robust design and advanced control system. Consider the opportunity to buy this MORI SEIKI NL 2000 SY /500 turn-mill centre. Contact us for more information.

This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information.

This 4-axis MORI SEIKI NL2000Y/500 was manufactured in 2004. It features a CNC control MSX 850, with X-axis travel of 260 mm, Z-axis travel of 590 mm, and Y-axis travel of 100 mm. The machine offers a max turning diameter of 356 mm and a max turning length of 510 mm. It includes a chip conveyor, 3-color status lamp, fixed tool holders, and a parts extractor. If you are looking to get high-quality turning capabilities consider the MORI SEIKI NL2000Y/500 machine we have for sale. Contact us for more information.

This 3-axis MORI SEIKI MV 40B/40 vertical machining centre was manufactured in 1995. Consider the opportunity to buy this MORI SEIKI MV 40B/40 vertical machining centre. Contact us for more information.

This 4-axis MORI SEIKI NHX 5000 was manufactured in 2012. Ideal for precision machining, this horizontal machining centre ensures reliable performance. Consider the opportunity to buy this MORI SEIKI NHX 5000 horizontal machining centre. Contact us for more information.

This 4-axis MORI SEIKI NL 2000 SY was manufactured in 2007, ideal for precision horizontal turning. It offers robust construction and reliable performance, suitable for a variety of turning applications. Consider the opportunity to buy this MORI SEIKI NL 2000 SY horizontal turning machine. Contact us for more information.

This 4-axis MORI SEIKI SH-50 was manufactured in 1997. A reliable horizontal machining centre, it offers robust construction and precision engineering. Ideal for complex machining tasks, this unit has maintained consistent performance over the years. Consider the opportunity to buy this MORI SEIKI SH-50 horizontal machining centre. Contact us for more information.

This 3-axis MORI SEIKI NV 5000 a1 B/40 was manufactured in 2007. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this MORI SEIKI NV 5000 a1 B/40 vertical machining centre. Contact us for more information about this machine.

This MORI SEIKI SL-204 MC was manufactured in 2001. A lathe equipped with an MSG-805 control system, featuring X-axis travel of 235 mm and Z-axis travel of 520 mm. It includes a spindle speed range of 45 - 4500 rpm and a spindle motor power of 11 kW. Ideal for precise and efficient turning operations. Contact us for further details regarding this lathe.

This MORI SEIKI SL-15MC was manufactured in 1995. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information.

This 4-axis MORI SEIKI NHX 5000 was manufactured in 2011, offering advanced capabilities for precision machining. Ideal for complex geometries, this horizontal machining centre ensures robust performance and reliability. Consider the opportunity to buy this MORI SEIKI NHX 5000 horizontal machining centre. Contact us for more information.

This MORI SEIKI CL2000B was manufactured in 2008. A robust horizontal turning machine featuring a max turning diameter of 440 mm and length of 363 mm. It includes a 10-station turret and an 8-inch chuck. The control system is the Mori Seiki MSX-805II. Consider the opportunity to buy this MORI SEIKI CL2000B horizontal turning machine. Contact us for more information.

This 4-axis MORI SEIKI NL2000Y/500 horizontal turning machine was manufactured in 2009. It features a CNC Control MSX 850II, with X-axis travel of 260mm, Z-axis travel of 590mm, and a maximum turning diameter of 356mm. The spindle speed reaches up to 6,000 rpm, supported by a spindle power of 11 kW. Includes a chip conveyor, 3-color status lamp, and fixed tool holders. If you are looking to get high-quality turning capabilities consider the MORI SEIKI NL2000Y/500 machine we have for sale. Contact us for more information.

This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine.

This 4-axis MORI SEIKI NL2500MC was manufactured in 2006, offering robust capabilities for horizontal turning. Ideal for precision machining, this unit ensures reliable performance with its advanced design. If you are looking to get high-quality turning capabilities consider the MORI SEIKI NL2500MC machine we have for sale. Contact us for more information.