- 1070 x 130 OMR-S(1)
- 1070 x 150 SMR-S(1)
- 2070 x 210(2)
- 4R OHS 1570 x 200(1)
- 4R OHS 2070 X 220(2)
- KM 0,8(1)
- KM 1,2(2)
- KMRH 2,5(2)
- KMRH 2,5 Hydr.(1)
- KMRH 4,0(1)
- KMRH 4,0 Hydr.(1)
- KMRH-4.0(2)
- KMRP 1,2(3)
- KMRP 1,8(1)
- KMRP 2,5(2)
- KMRP 2,5 hydr.(2)
- KMRP 2,5 man.(2)
- KMRP 4,0(1)
- KMRP-1,2(2)
- OCM 2060-2(1)
- OGM 1050 x 1,5(1)
- OHP 10(1)
- OPK 45 Premium(1)
- OPK 65(1)
- OPK 85(1)
- ORGM 1050 x 3(1)
- ORGM 1050 x 6(1)
- ORGM 2050 x 3(2)
- ORGM 3050 x 4(1)
- ORM 1070 x 110(1)
- ORM 1070 x 130(4)
- ORM 1070 x 4(1)
- ORM 1070 x 5(1)
- ORM 1270 x 130(1)
- ORM 1270 x 4(1)
- ORM 1270 x 6(1)
- ORM 1570 x 140(1)
- ORM 1570 x 3(1)
- ORM 1570 x 4(1)
- ORM 2070 x 140(2)
- ORM 2070 x 2/3(1)
- ORM 2070 x 3,5(1)
- ORM 2070 x 4(2)
- ORM 2570 x 140(1)
- ORM 2570 x 2,5(1)
- RGM 1050 x 3(1)
- RGM 2050 x 3(1)
- S 1050 x 46(1)
- S 1070 x 66(1)
- S 1070 x 76(2)
- SB 1070 x 95(1)
- SBM 1070 x 90(1)
- SBM 1070 x 95(7)
- SBM 1270 x 90(1)
- SBM 1270 x 95(3)
- SBM 1570 x 2,2(1)
- SBM 1570 x 2,5(1)
- SBM 1570 x 95(1)
- SBM 2070 x 1,5(1)
- SBM 2070 x 95(2)
- SBM 700 x 95(2)
- SBR 1070 x 96(1)
- SM 1050 x 46(1)
- SM 1070 x 76(2)
- SMR 1070 x 96(2)
- SMR-S 1070 x 150(1)
- SMR-S 2070 x 170(1)
- SMR-S 2070x170 Premium(1)
New in: 2024
new
DutchMach - 4 rollers - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter over roller 220 mm - Diameter under the roller 220 mm - Side roller diameter 180 mm -Hydraulic - Digital display for the left roll movement - Digital display for the movement of the middle lower roller - Digital display for the movement of the right roller - The upper roller can be folded out hydraulically - Steel structure ST-52 - Hydraulic drop-end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system -Overload protection -Documentation - 400V
new
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
sheet width: 2000 mm plate thickness: 8 mm pre-bending: total power requirement: 7,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3600x1250x1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
plate thickness: 2,5 mm roll diameter: 98 mm throat: 160 mm total power requirement: 1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 550x1400x1500 m Delivered with: • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
WMT GmbH & Co. KG plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With 4 roller sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
