used OTT for sale

Panel dimensions 3000 x 1300 mm 6 cylinders Electric heating

Ott veneer press Type JU 60 Built in 1979 Hydraulic Hot Plate Press electrically heated heating plates Pressing area 2200 mm x 1100 mm Maximum insertion height 280 mm With tap control Emergency stop ripcord all around Gold anodized plates 4 plungers diameter approx. 80 mm Connected load 12 kW Spec. Pressure at full occupancy 2.7 kg/cm² Total pressing pressure 65 tons Weight approx. 2800 kg

OTT Alpha 136 heavy-duty wide-belt calibration fine grinding machine Combined grinding unit Contact Roller - Calibration 90 SH pneum. Sanding shoe unit auto. Cleaning brush unit Working width 1360 mm Motor power grinding unit 11 kW semi-auto, workpiece dimension Grain size compensation for contact roller Total connected load approx. 15 kW Year of construction 1988 Machine is CLEANED, FUNCTIONAL in GOOD CONDITION From the carpentry site 

gebr. Veneer press OTT JUNIOR JU2511 Year 2000 Ges. Connected load: 18.5 kW (rated current: 27.9 A) Pressing area: 255 x 110 cm Electric heating plates aluminium with foil clamping system Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 90 mm Total pressing force: 70 t Spec. Pressure: 2.8 daN/cm² Hydraulic pressure max.: 275 bar Power per heating plate: 7,800 W Circumferential safety step strip inside + outside (emergency stop) Automatic opening (time-controlled) Stroke limitation / opening width limitation (adjustable limit switch) External dimensions: approx. 304 x 123 x 191 (WxDxH) Weight: 3.0 t From first ownership. Great condition! Paint touched up in places.

OTT shelf press shelf length 330cm width 160cm 3 dunks clearance between shelves 13cm, max clearance with one load 46cm Solid steel shelves Water heating piston diameter 90mm, 10 pistons Safety switch - breakaway 5.5KW Pump Motor total pressure 210 tons machine very solid weight +- 14.000kg machine in stock, can be checked, very good condition loading included in the price

Crimping area 3.6 x 1.35 m, electrically heated, 23 KW, n= 1400

Electro Hydraulic Heating Plate Press, Hot water, press area 2500 x 1350 mm.

Veneer Press OTT Pressing area 2500 x 1300 mm Electric Heating Plate L x W x H: 3000 x 1500 x 1700 cm Weight approx. 3 to The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Pressing area 2500 x 1300 mm 60 tons total pressing pressure 4 cylinders 80 mm Opening 400 mm Electrically open and close (no lever) Electric heating Heating plates gold anodised.

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...

Wide belt sanding machine Ott Type: RSKO 1100 Grinding width 1100 mm 1 combi unit sanding belt Connected load 14.5 kW

Motor 11 kW380 V/50 Hz, feed rate 10-20 m/min., glue basin, pressing unit, cross-cut saw, flush milling cutter, radius milling cutter, extraction connection D=120 mm

OTT Megatronic 11 + paint Wide-belt calibration fine grinding machine 1. Grinding Unit Calibration Roll Unit 2. Grinding unit electronically controlled link sanding shoe unit Working width 1100 mm Feed speed 5 + 10 m/min Rigid sanding shoe for solid and frame grinding Lacquer finish: Vacuum carpet Vacuum generator 3 kW 2. Belt speed Tape radiation Total connection approx. 24.5 kW CE version Machine in EXTREMELY NEAT CONDITION from carpentry dissolution - craft business ex location

OTT JU8 Veneer press Heating plate size approx. 2.25m x 1.35m 4 lifting cylinders Weight approx. 4,000 to 4,500 kg incl. heating plates hydraulic Mod. 14kW 400V 50Hz Please make an appointment for a viewing in advance. G&-5103-o0691

Working width: 1100 mm Number of sanding units: 1 st. Workpiece thickness max.: 150 mm sanding belt measurements: mm Motor roller: 11 kW Motor pad: kW Feed motor: 1,5 kW Feed speed: m/min. Overall size: mm Weight: 2250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05