used SCHEER for sale

Panel Saw Scheer – Automatic Panel and Veneer Saw Type: FM 9-4200 Cutting length 4200 mm Cutting height 70 mm Saw motor 5.5 kW Saw feed rate 1 – 30 m/min. Cutting width with extra stop up to 2.42 m Good condition, ready for immediate use Test run possible Weight approx. 930 kg

Dowel drill Scheer Dowel Hole Drill Type DB 5 Machine No. 508310 Year of manufacture 1983 Drilling of carcasses, frame joints, drawers, Door coverings, rows of holes or groups of holes Drill beam length 640 mm Spindle spacing min. 32 mm, max. 640 mm 21 pieces of spindles Drilling depth 80 mm With drills Drill beams can be swivelled pneumatically Motor power 2.2 kW Portal passage maximum width with one side stop 915 mm, with 2 side stops 770 mm 2 pneumatic hold-down devices on machine table Weight 460 kg with pallet Dimensions 1350 mm x 820 mm x H 1400 mm

max. cutting length : 3000 mm max. cutting height : 45 mm Saw blade diameter : 160 mm Tension beam movement : by handwheel Movement of the saw carriage : manual Machine type : mobile Motor power : 1.8 kW

Veneer joining machine Scheer Cutting length 2500 L x W x H: 3.0 x 1.2 x 1.5 m Weight 300 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Panel Saw Scheer Type: PA 7004 Year of Make: 1999 Cutting length 4200 mm with automatic lift table loading with cutting optimization software Full formats 2800 x 4200 mm and half formats 2800 x 2070 mm were processed

Cutting length 3100 mm

3000 mm

- 21-spindle drilling unit - Complete stop system - Drill Assortment

Joining saw and fine-cutting saw with joining unit and veneer stop table A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy-to-guide sawing unit, runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear side table with penetrating finger stop, adjustable from 2 - 50cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Fuernier pad made of low-wear hard plastic Drive motor 2.2kW HM-tipped fine-cut blade Joining sheet PCD-tipped Practical front veneer support Angle stop left Suction connection 80mm with adapter to 100mm Emergency stop switch CE mark O ...

Cutting length: 3100mm, cutting height: 45mm, saw blade diameter: 180mm, motor power: approx. 2kW, machine dimensions X/Y/Z: approx. 3900mm/1100mm/1500mm, weight: approx. 500kg. Including pneumatic pressure beam and rear support table. On-site inspection is possible.

Scheer Type DB 5 dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction as well as for precise joints in interior design. Includes a comprehensive range of dowel drill bits., drilling spindles: 21, division: 32 mm, passage width: max. 1.000 mm, Pivot: pneumatic

Veneer saw Scheer FM 2-3000 for sawing or cutting veneer or thin wood., cutting length: 3.000 mm, Saw blade diameter: 180 mm, engine: 2.5 hp

Foot operation., Engine: 1.1 kW // 2,700 rpm.

Manufacturer: Scheer, Type: DB 10, Control: Hand, Drilling beam swivel-mounted: yes, Number of drill spindles: 3, Working length mm: 2200, Lochraster: 22,5, Drilling engine kW: 0,75, Working range max mm: 65, Work piece clamping: pneumatisch, Work stations: 2, Wight approx. kg: 400,

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

Manufacturer: Scheer Funiersäge, Cutting lenght mm: 2800, Working hight mm: ca.30, Main engine kW: ca.1,5, Pressure beam: yes,

Manufacturer: Scheer, Year: 2003, Program: yes, Type: PA 6000, Plattenformat max mm: 4200 x 3200, Working hight mm: 80, Length to slide in mm: 4200, Saw Blade Diameter mm: 350, Number of clamping tools: 7, Main engine kW: 9, Feeding speed max m/min: 70, Feeding speed continous adjustable: yes, Scoring Aggregate : yes, Compressed air bar: 6, Year :2003

cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;