used SCHRÖDER for sale

Table milling machine Schröder Table length 2480 mm Extendable table support Milling spindle in the machine diameter 30 mm incl. milling spindle diameter 40 mm with 4 rollers feed wood with mechanical spindle brake by foot lever Weight approx. 800 kg

Cutting width 2,500 mm Sheet thickness 2 mm Manual backgauge 750 mm

Working width 2,500 mm Max. sheet thickness - steel / stainless steel / aluminium 1.5 mm / 0.8 mm / 2.5 mm Bending angle preselection Foot switch

with pneumatic bending beam support (compressed air required) with manual Knoll roller shears, with Knoll profiling and pressing head Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 4020 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: grey/blue Dimensions: 4465 x 4320 x 1255 mm Machine weight: 2400 kg Upper bolster stroke: 110 mm with roller scissors Bending angle: 145 degrees Machine number: 15000057

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

Offer 24483 Specifications: - Max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment selectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - E. footswitch - Upper bolster drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg

sheet width: 3020 mm plate thickness: 2,00 mm distance between columns: mm thickness - aluminium: 4,00 mm thickness at Niro-steel: 1,50 mm rear stop: 1000 upper beam stroke: 200 mm bending angle: 145 ° total power requirement: kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,30 x 2,60 x 1,90 m - Manual bending beam adjustment - Foot pedal - Total power requirement 32 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 4 mm stroke: 250 mm total power requirement: 4 kVA weight of the machine ca.: 3720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 5 mm no. of strokes: 32 Hub/min table height: 820 mm total power requirement: 11 kW weight of the machine ca.: 4.440 kg dimensions of the machine ca.: 3360x1400x1440 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 8,00 mm Folding length: 1250 mm Depth rear gauge: 1000 mm CNC Brand: _Unknown / Other CNC Model: POS 900 Make Schroder 8 mm Type MAK 4 / 1500 x 8.0 Year 1998 POS 900 - 1000 mm Sheet thickness (mm) T = 8.0 mm Folding length (mm) L = 1.520 Depth rear gauge (mm)X = 1.000Hydr. upper & lower beam Hydraulic top tool clamping 1 set tooling  

Working width: 2500mm, bending capacity: 3mm, connected load: 5kVA, weight: 3.5t.

Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible.