used SEW EURODRIVE for sale

The engine is new and unused. Technical data see pictures

A new SEX engine will be sold. The engine is new and unused. Original price 5.859,29€ from August 2024

SEW-EURODRIVE Slip-on Gear Motors 18.5 kW (4 pcs.) TECHNICAL SPECIFICATIONS Manufacturer: SEW-EURODRIVE Description: Slip-on gear motors Type: KA97 DRE180L4/RS Available units: 4 pcs. Rated power: 18.5 kW Rated speed: 1470/66 r/min Rated current: 35.50/20.5 A Rated Voltage (Volts): 380-420 Δ /660-725Y Nominal frequency: 50 Hz Power factor: Cos φ 0.85 Degree of protection: IP 55 Thermal Class: 130 (B) Efficiency: eff. % 91.7 1E2 SPECIFIC COMMENT - Motors were used in pairs to operate a conveyor belt - Year of construction 2010 - Engines were used for about 1 year - Dismantled and ready for loading

TECHNICAL SPECIFICATIONS Manufacturer: SEW-EURODRIVE Description: Slip-on gear motors Available units: 4 pcs. Rated power: 18.5 kW Rated speed: 1470/66 r/min Rated current: 35.50/20.5 A Rated Voltage (Volts): 380-420 Δ /660-725Y Nominal frequency: 50 Hz Power factor: Cos φ 0.85 Degree of protection: IP 55 Thermal Class: 130 (B) Efficiency: eff. % 91.7 1E2 SPECIFIC COMMENT - Motors were used in pairs to operate a conveyor belt - Year of construction approx. 2010 - Engines were used for about 1 year - Dismantled and ready for loading

power capacity: - kW volt: max 400 V ampere: max 13,2 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SEW Eurodrive EMV-Modul EF030-503

SEW Eurodrive Movitrac 31C008-503-4-00

Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible.

Gear motor variable / adjustable SEW S60- D22 B ( S60-D22B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 15 - 115 rpm manually adjustable 380 V IP55 shaft diameter: Ø 35 mm New ! Dimensions: 710 x 350 x 280 mm

Control Panel, Control Panel, Control Panel SEW MOVITRAC FBG31C-08 822997X New ! Dimensions: 120 x 85 x 30 mm

Control Panel, Control Panel, Control Panel SEW FBG31C-01 8222932.15 New ! Dimensions: 120 x 85 x 30 mm

Gear motor variable SEW transmission: S42-VUO 17-81 rpm manually adjustable via V-belt motor: eDFT71D-4 0,0,0,0 37 KW 1370 rpm 220/ 380 V 3AC IP54 Shaft diameter: Ø 25 mm Motor base: 130 / 135 x 124 mm Hole spacing ( parallel to shaft ): 100 mm hole spacing ( transverse to shaft ): 80 mm hole diameter: Ø 10.5 mm New ! Dimensions: 430 x 220 x 360 mm

Gear Motor with Brake SEW R37DT71D4/BMG/HF/Z/AMB1 0.37 kW 71 rpm 400 V IP54 Shaft diameter: 25 mm New! Dimensions: 500 x 220 x 160 mm

Gear Motor with Brake SEW R43DT71C4BM 0.25 kW 41 rpm 220 / 380 V IP54 shaft diameter: 25 mm used, tested ! Dimensions: 470 x 220 x 150 mm

Geared motor with brake SEW R43DT80K4BM 0.55 kW 41 rpm 220 / 380 V IP54 shaft diameter: 25 mm used, tested ! Dimensions: 520 x 220 x 150 mm

Servo motor with gearbox and brake, permanent magnet motor SEW PSKF522 CM71S/BR/TF/RH1L/SB50 ( PSKF522CM71S / BR / TF / RH1L / SB50 ) < br /> -120 rpm IP65 400 V shaft: Ø 32 mm flange: 105 x 105 mm New ! Dimensions: 580 x 190 x 140 mm

Geared motor with brake and sine wave - speedometer SEW FH37/G DT904S4/BMG/HR/TF/ES1S/IS3 1.1 kW 98 rpm 220 / 380 V IP54 shaft diameter: 30 mm New !' Dimensions: 550 x 290 x 280 mm

Geared motor with brake SEW KA77R37DT71D4/BMG 0.37 kW 2.8 rpm 220 / 380 V IP54 shaft diameter: 50 mm New ! Dimensions: 760 x 290 x 220 mm

Gear motor variable / adjustable SEW S79 D26B ( S79D26B ) 2,2,000 2 kW 24.4 - 121 rpm 380 / 660 V IP54 239 - 150 Nm shaft diameter: Ø 45 mm used, tested ! Dimensions: 810 x 320 x 360 mm

Frequency Inverter, Inverter SEW MOVIDRIVE MDV60A0110-5A3-4-0T 08273421 MDX60A0110-5A3-4-00 08226857 Control head: MDV60A-0T 08240728 16,16,00 8 kVA Input: 380 - 500 V 3AC Output: 0 - U-Input used, tested !' Dimensions: 370 x 130 x 325 mm

Frequency Inverter, Inverter SEW MOVIDRIVE MDF60A0110-5A3-4-00 08264724 MDX60A0110-503-4-00 08226857 Control head: MDF60A-00 08227012 16,05,00 8 kVA Input: 380 - 500 V 3AC Output: 0 - Uinput used, tested ! Dimensions: 370 x 130 x 325 mm

Variable Frequency Drive, Inverter SEW MOVIDRIVE MDS60A0075-5A3-4-0T 08273553 MDX60A0075-5A3-4-00 08226849 Control Head: MDS60A-0T 08240736 11,000 2 kVA Input: 380 - 500 V 3AC Output: 0 - U-Input Used, Tested ! Dimensions: 335 x 130 x 325 mm

Frequency Inverter, Inverter SEW MOVIDRIVE MDF60A0030-5A3-4-00 0826466X MDX60A0030-5A3-4-00 08227195 Control head: MDV60A-00 08227012 4,00 8 kVA Input: 380 - 500 V 3AC Output: 0 - Input used, tested !' Dimensions: 340 x 105 x 280 mm

Frequency Inverter, Inverter SEW MOVIDRIVE MDV60A0030-5A3-4-0T 08273383 MDX60A0030-5A3-4-00 08227195 Control head: MDV60A-0T 08240728 4,8 kVA Input: 380 - 500 V 3AC Output: 0 - Input used. tested ! Dimensions: 340 x 105 x 275 mm

Gear Motor with Brake SEW FHF37DT80K4/BMG/TH/ISU4 0.55 kW 58 rpm 400 V IP54 shaft diameter: 30 mm flange diameter: 160 mm New ! Dimensions: 460 x 340 x 180 mm

Gear Motor with Brake SEW R17DT80N4/BMG 0.75 kW 306 rpm 220 / 380 V IP54 shaft diameter: 20 mm New ! Dimensions: 490 x 200 x 150 mm

Mains recovery, regenerative unit SEW MOVIDRIVE MDR60A0750-503-00 8265569 91 kVA Input: 380 - 500 V 3AC Output: 560 - 780 V DC used, tested ! Dimensions: 540 x 280 x 210 mm

Gear Motor SEW W30DT71D4/TH/ISU4 0.37 kW 35 rpm 230 / 400 V IP54 Shaft diameter: Ø 20 mm New ! Dimensions: 340 x 210 x 160 mm

Gear motor SEW W30DT71D4/TH/ISU4 0.37 kW 56 rpm 230 / 400 V IP54 Shaft diameter: Ø 20 mm New ! Dimensions: 340 x 210 x 160 mm

Gear Motor with Brake SEW R43 1LC5063 - 2EC19Z / 2LM1002 / 1NW / K31 ( R431LC5063-2EC19Z/2LM1002/1NW/K31 ) 0,0,0,000 25 KW 29 rpm Gearbox: SEW R43 Gear ratio: 1 : 95,22 Shaft diameter: Ø 25 mm Shaft length: 50 mm Groove width: 8 mm Gear foot: 160 x 145 mm hole spacing ( parallel to shaft ): 130 mm hole spacing ( transverse to shaft ): 110 mm hole diameter: Ø 9,9,000 0 mm motor: SIEMENS 1LC5063-2EC99-Z 0.25 kW 2720 rpm 230 / 400 V 3AC 50 Hz IP 54 Sprocket: diameter. Ø 111 mm, Width: 19 mm, Teeth: 17 used, tested ! Dimensions: 410 x 190 x 165 mm

Geared motor SEW AFF40DT63L - 4 ( AFF40DT63L-4 ) 0.25 kW 52 rpm 230 / 400 V shaft diameter: Ø 30 mm Flange diameter: Ø 200 mm New ! Dimensions: 370 x 290 x 200 mm

Geared motor with brake SEW RF40D80K4BS 0.55 kW 180 rpm 220 / 380 V shaft diameter: Ø 25 mm Flange diameter: Ø 160 mm New ! Dimensions: 530 x 175 x 220 mm

Gear motor SEW S42DT90L6 0.48 / 0.75 kW 119 / 183 rpm 380 V Shaft diameter: Ø 25 mm New ! 2 speeds ! Dimensions: 445 x 270 x 200 mm

Geared motor with brake SEW RF60DT80N2BMG/Z 1.1 kW 45 rpm 230 / 400 V IP54 Shaft diameter: Ø 30 mm Flange diameter: Ø 160 mm New ! Dimensions: 600 x 200 x 180 mm

Gear Motor SEW eDFT100L8TF 0.66 kW 0.9 rpm 220 / 400 V IP55 Ex protected !' Shaft diameter: Ø 100 mm used, tested ! Dimensions: 1130 x 450 x 680 mm

Gear Motor with Brake and Tachogenerator SEW K157 CV180M4/BM/HR/TF/AV1H ( K157CV180M4/BM/HR/TF/AV1H ) 33 rpm 340 V 101 Hz ! IP54 shaft diameter: Ø 120 mm used, tested ! Dimensions: 1550 x 700 x 700 mm

Motor control, drive converter, frequency converter, inverter SEW MoviMot MM05C-503-00 8241163 up to 0.0.00 55 kW 380 - 500 V with field distributor MFP21D/MM03c-503-00/Z27F 1 and connection unit MFZ27F 1 8244286 Dimensions: 330 x 175 x 125 mm

Gear Motor SEW FA47 DT100L4/TF ( FA47DT100L4/TF ) 2.2 kW 81 rpm 230 / 400 V IP65 New !' shaft diameter: Ø 35 mm Dimensions: 470 x 330 x 260 mm

Geared motor SEW- EURODRIVE type: R167 DRE225M4/TF ( R167DRE225M4/TF ) 45 kW 37 rpm 400 / 690 V shaft diameter: Ø 120 mm with FLENDER coupling used, tested ! Dimensions: 1600 x 700 x 950 mm

Gear Motor with Brake SEW SF37DR63L4/BR/TF/C/IS 0,0,0,0 37 kW 35 rpm 220 / 380 V IP65 shaft diameter: Ø 20 mm Flange diameter: Ø 120 mm New !' Dimensions: 430 x 240 x 160 mm

Geared motor variable / adjustable SEW S60- 21 B ( S60-21B ) 0,0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 23 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm used, tested ! Dimensions: 720 x 340 x 280 mm

Electric motor with external fan SEW MFT71D8VS 0.4 kW 750 rpm 220 / 380 V IP54 Shaft diameter: 14 mm Flange diameter: 160 mm with external fan A2E170-AA11-65 46 W New !' Dimensions: 350 x 230 x 160 mm

Gear motor variable / adjustable SEW S60-D21 B ( S60-D21B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 23 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm used, tested ! Dimensions: 720 x 340 x 280 mm

SEW-EURODRIVE Type: KF67 LP100 ( KF67LP100 ) 1.8 kW 132 rpm 380 V 50 Hz IP 54 Dimensions: 87x27x26 cm Shaft diameter: 40 mm

Gear Motor with Brake SEW-EURODRIVE 0.3 / 1.3 kW 11 / 47 rpm Gearbox: R803 LP90 ( R803LP90 ) i: 1 : 57,, 44 motor: SDFT90L8/2BMG/HR 0.3 / 1.3 kW 630 / 2680 rpm 400 V 3AC IP 55 Shaft diameter: Ø 50 mm Wavelength: 100 mm Groove width: 14 mm Motor base: 310 x 290 mm Hole spacing ( parallel to shaft ): 260 mm Hole spacing ( transverse to shaft ): 215 mm Hole diameter: Ø 17.5 mm used, tested ! Dimensions: 850 x 310 x 365 mm

SEW-EURODRIVE Type: KA47 T DT80 N4 /BMG ( KA47TDT80N4/BMG ) Power: 0.75 kW Speed: 159 rpm Voltage: 220/380 V Frequency: 50 Hz Dimensions: 55x20x20 Shaft diameter: 35 mm

Geared motor SEW R37 DT71D4/TF/MSW ( R37DT71D4 / TF / MSW ) 0.37 kW 35 rpm 380 V IP55 Shaft diameter: Ø 25 mm As good as new, tested ! Dimensions: 410 x 230 x 170 mm