used STANKO for sale

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

table diam 1400,max turning diameter 1600 sinumeric 802 d

HBM STANKO 2A622 CNC

Processed bore diameter, mm -100-400 Work piece diameter, mm - 800 Work piece length, mm - 320 P motor ,kW - 7,5 Machine dimensions , mm - 4165x1780x2000 Machine weight, kg - 8600 Price 9500 EUR

Weight: 268 tons Overall dimensions of the machine: Height: 10960 mm Width: 14200 mm Length: 8415 mm Max. diameter of a work-piece:: 6300 mm Maximum height of the installed product: 5000 mm Max. weight of a work-piece: 125 ton Electric motors: P-112, power 125 kW, speed 330-1000-2200 rpm PMF 45.6, power 5 kW, speed 14-2800 rpm AOS2-51-4, power 8.7 kW, speed 1335 rpm AO2-31-4, power 2.2 kW, speed 1420 rpm AOS2-21-4, power 1.3 kW, speed 1300 rpm AOS2-4, power 10 kW, speed 1460 rpm

STANKO 2N636GF1 Horizontal boring mill MITSUBISHI controler, new 2013 Spindle 125 mm Table 1600 x 1800 mm Max. horizontal (axial) movement of the spindle (Z') - 1000 mm Max. vertical movement of the headstock (Y)- 1400 mm Max. longitudinal movement of table (Z, W) - 1600 mm Max. lateral movement of table (X) - 1400 mm The largest mass of the processed product - 8 tons Spindle speed - 8 ... 1250 rpm Spindle Drive Electric Motor - 20 kW The weight of the machine is full - 34.6 tons

The largest diameter of the processed part, mm 8000 The largest module of processed gears is 40 Min spindle speed rpm: 10 Max spindle speed, rpm: 60 Electric motor 109.81 kW, 220\380V Dimensions, mm 12640_5090_6138 Weight, kg 170,967

is used for hobbing cylindrical wheels with worm and disc milling cutters. It allows you to perform gear hobbing works - to produce cylindrical spur and helical gears, cutting teeth by radial plunge with the largest modulus - 20-25 mm. and the diameter of the processed gear wheel - 2500-2800 mm. Specifications: Model 5V370 Machine Type Gear Hobbing Producer Kolomna Heavy Machine Tool Plant (KZTS) Main Motion Motor Power 19 kW Platter diameter 500 mm. Machine weight with optional equipment 27,000 kg. Dimensions of the machine 7,600 x 2,890 x 2,170 (mm.) Parameters of manufactured parts: Maximum outer diameter of the workpiece 2,500 mm. Minimum outer diameter of the workpiece 50 mm. Maximum length of tooth milling 500 mm. Maximum tooth angle of the wheels to be cut 45 Maximum weight of manufactured parts 4,000 kg. Maximum tooth modulus of manufactured wheels 20 mm. Maxi ...

Sell a well-preserved triple honing machine from Stanko. The machine was in use until it was dismantled. The dimensions of the machine are LXWXH 800mm x 1100mm x 1650mm. The weight is 800kg. The dimensions of the control cabinet are LxWxH 350mm x 950mm x 1550mm. The weight is approx. 150kg. If you have any questions, just get in touch. The machine can be viewed by prior appointment. Shipping, on 2 pallets, is no problem. Please inquire about shipping costs with zip code. Furthermore, the machine can be delivered and unloaded in the immediate vicinity with its own crane truck and against assumption of costs. On-site loading is no problem and free of charge. The sale is without warranty and guarantee. The return is excluded. All information without guarantee.

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Spline shaft Grinding machine STANKO 3M451B/1500 with accessories.

Clamping jaws, jaw boxes for face plate type 1516

Inv. Num. : 7565 Type: 2D450 Produzent: STANKO Erzeugt: Parametern: Arbeitstischlänge: 1120 mm Arbeitstischbreite: 630 mm Ausstattung: Dreharbeitstisch DRO

Horizontal semi-automatic gear hobbing machine Stanko 5B373P Year: 1975 Max. work piece diam: 800 mm Max. work piece length: 3500 mm Max. module: 35 Spindle RPM: 7.4-74 Total weight: 49.3 tons

VTL STANKO 1531

Bevel gear shaper STANKO 5A250 - max modul: 8-10 - max diemeter: 500 mm - change gears

Radial Drilling Machine STANKO DVD 2K52 Spindle CM3 Spindle speed: from 63 to 1600 RPM Useful table dimensions: Length 800 mm x Width 630 mm Arm travel: 500 mm Spindle travel: 250 mm Year of construction: 1987 Maxi distance spindle nose/table: 950 mm Column diameter: Ø 180 mm Automatic up/down Swivel spindel head Swivel arm 360° rotation Voltage: 380 V Dimensions (L x W x H): 1800 x 1000 x 2500 mm Weight: approx 1,5 T

model is 5B 150P - table diameter is 800mm - max stroke is 160mm - control is Omron NS12 - logic equipment and sensors: Omron CS1 series CPU control cards Electric drawings and safety and instructions for use are updated at 2004 same as the modernisation

turning diameter over bed: 1000 mm spindle passage: 128 mm turning length: 5000 mm total power requirement: 22 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1000 mm spindle diameter: 128 mm turning length: 8000 mm total power requirement: 22 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m only one steady is for sale Belt drive shaft bearing damage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 440 mm throat: 420 mm workpiece height: 200 mm cutting speed: 20 - 1550 m/min table surface area: 560 x 560 mm band length: 3250 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 8 mm distance between columns: mm electrical: . weight of the machine ca.: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke: 1 mm Throat: 1 mm Table diameter: 1 mm Slotting machineSTANKO - 7D430 MACH-ID 9116 Make: STANKO Type: 7D430 Year: 1994 Show price Request quotation Length:3000mm Width:2200mm Height:3000mm Weight:6150kg

Stanko Ø 540 x 2000 mm Distance between centers: 2000 mm Swing over bed: 540 mm Swing over cross-slide: 280 mm Diametre of main spindle bore: 52 mm

Turning diameter over bed/over slide: 400/220mm, turning length: 1000mm, control: AXESTA, with three-jaw chuck.

faceplate diameter:400 mm weight of the machine ca.:60 kg

rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

Slot head for milling machine, milling head, CCCP / USSR STANKO Type 1502Nr: 200 Year of construction 1974Stroke size: max. 60 mmStroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plateHole spacing machine-flange plate: 245 x 185 mmMounting hole: 17 mmCentering diameter on the machine flange plate: 190 mm- Stroke size adjustable via eccentric adjustment- The drive is as with the normal vertical head from the machine gearbox- Drive via driver, centric in the centering diameter- Degree scaling at the

Machine vise STANKO / BZSP (Made in USSR) Model: 7200-0221 jaw width: 200 mm jaw height: 65 mm Span: 0...260 mm on rotary table with graduation 360° rotatable solid design !' Dimensions: 600 x 370 x 185 mm

Face Plate STANKO 7103-0049 Outer Ø: 400 mm Bolt Circle Ø : 135 mm Bore Ø: 100 mm New ! preserved ! Dimensions: 400 x 400 x 165 mm

Rotary table STANKO 720440023 Ø 400 mm Table height: 160 mm used, tested ! Dimensions: 500 x 600 x 160 mm

Machine vise STANKO / BZSP (Made in USSR) jaw width: 300 mm span: 20 - 275 mm on rotary table with graduation solid design ! Dimensions: 550 x 370 x 225 mm

Face Plate STANKO Outer Ø: 400 mm Bolt Circle: 135 mm Height with Jaws: 160 mm Bore Ø: 100 mm Overall Height: 160 mm 4 Jaws New ! Dimension: 400 x 400 x 160 mm

Machine vise STANKO jaw width: 250 mm span: 220 mm jaw height: 70 mm good condition ! Dimensions: 650 x 300 x 180 mm

turning diameter: ca. 1100 mm turning length: 2800 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slot butt head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No: 200 Year of construction 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment- The drive is infinitely variable as with the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45- This groove butt head is flanged instead of the normal vertical milling head (assembly instead of the vertical milling head, milling head) Weight: 42 kg good condition groove butt head stock number 58166 and vertical milling head stock number 58164 of identical STANKO milling machine.; used

Round Sectioning Table, Rotary Table, Circular Dividing Table STANKO 7204-0003 Table diameter: Ø 250 mm Table height: 110 mm groove size: 12 / 22 mm groove depth: 19 mm centering hole in table: Ø 40 / 31 mm, depth: 10 mm Mounting holes in footplate: Ø 14 x 25 mm ( U-shape ) used, tested ! Dimensions: 425 x 420 x 110 mm