used TRAUB for sale

Inv. Num. : 7973 Type: A 15 Producer: TRAUB Created: 2021 Parameters: Maximum spindle speed: 6500 1/min Spindle bore: 15 mm Length: 1300 mm Width: 1000 mm Height: 1600 mm Weight: 700 kg

Control Traub ... TX 8 i Turning diameter ... 680mm Turning length ... 1000mm Inclined bed Spindle bore ... 100mm powered tools ... 12/12 Axis X ... 320mm Axis Z ... 1070mm Axis C ... 0,001° Rapid traverse of the X axis... 15m/min Rapid traverse of the Z axis ... 20m/min Spindle speed ... 1-2240 rpm Max. spindle torque ... 682Nm Main engine power ... 31kW Speed of driven tools ... 1-3150 rpm Machine weight ... 6800kg L x W x H ... 5500x2300x2150mm

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Fully functional Traub Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

Fully functional Traub lathe built in 1972 Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

GENERAL Project No.: 905732 Quantity: 1 pcs. Manufacturer: TRAUB Type: TNL 18 Control: Traub TX 8i-s Year of Make: 2011 Condition: Used machine Spindle Approx (hrs): 28381 Program run approx. (hrs.): 36646 DESCRIPTION TURN Max. turning diameter 20 mm Max. speed main spindle 10000 1/min Max. power main spindle at ED 10-40/100% 3.7/2.2 kW Max. torque main spindle at ED 10-40/100% 23.5/14 Nm Spindle aperture main spindle 20 mm Axes on the main spindle unit Z/C Workpiece spindle stroke main spindle 205 mm Max. rapid traverse speed in X/Y/Z Main spindle unit -/-/40 m/min Hollow clamping cylinder on the main spindle Max. speed of sub-spindle 10000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Max. torque sub-spindle at ED 10-40/100% 23.5/14 Nm Spindle passage sub-spindle 20 mm Axes on the sub-spindle unit X/Z/C Travel in X/Y/Z sub-spindle unit 100/- ...

Traub System TX 8i control system Max. rod diameter 26 mm Machinable length 225 mm Travel 250 mm Max. spindle speed 8,000 rpm Sub-spindle, driven tools Machine weight / space requirement / machine height 4 t / 3.71 m x 1.3 m / 1.63 m Accessories: LNS Hydrobar loading magazine; without tool accessories Note: The hard drive needs to be replaced,

CNC Swiss Automatic Lathe with Bar Feeder - Main spindle with C-axis - Holder for driven guide bush max. passage 26 mm - Sub-spindle with C-axis - Workpiece ejection device - Tool carrier at the bottom with 12 driven tool carriers - Tool carrier at the top with 12 driven tool carriers - x3 transverse axis for front apparatus/sub-spindle - Front apparatus 5-way with Z3 carriage - Tapping side processing station - Workpiece removal device - Hinged belt chip conveyor - Coolant system - Setup for deep drilling - Fire protection device for processing with cutting oil - Traub Tool Monitoring TX8i - FMB bar loading magazine

CNC Swiss lathe TNL12/7 with bar loading magazine and fire protection equipment for oil processing Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment Bar Feeder Coolant Setup Conveyor Production time: 36150 h

Attention: Axle amplifier X3 axle defective and CPU bar loader missing/defective. Production time: 34293 h Spindle runtime: 36396 h Switch-on hours: 55709 h Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment (disabled) Bar Feeder Coolant Setup Conveyor

Control Traub TNX 8H Max. turning diameter 395 mm Max. turning length 450 mm Standard turning diameter 275 mm Circumferential diameter over face slide 395 mm Circumferential diameter over bed 520 mm Max. speed of the main spindle 4,000 rpm Drive power 11 kW Usable rod diameter 40 mm Accessories: Chip conveyor, chuck diameter 160 mm, tool cabinet Remarks: 72,000 hours engine, available at short notice by arrangement

Article number: 22-99-015 Manufacturer: Traub Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1984 L x W x H: approx. 800x600x1300mm Weight: approx. 300kg Control: conventional Chamfer diameter from - to: approx. Ø 20-60mm Accessories  Support bracket Other accessories on request Price and other technical data on request

Max. rod Ø: 42mm Chuck ø: 40mm Diameter over face slide: 160mm Speed range: 10-5000 rpm 12-station turret (non-driven) 12 Conveyor Bar feeder FMB turbo 3000 Max. pole length: 3m

TRAUB TNS 65 D / 5 - Axis CNC Lathe -COMPLETE TECHNICAL DATA see Data sheets -Control TX8 D -Built in 1994 -C - Axis -Rod passage 65mm -Hydraulic bar loading magazine -Various powered tools -Tool holder -Three-jaw chuck -Documentation

Traub TNX 65/42 CNC rod lathe/ BJ 2007/ TX8i-S control/ incl. chip conveyor, coolant lubricant preparation and extraction

Traub TNC 42/65 With gantry loader ( can be dismantled ) Top maintained and immediately ready for use. For purchases made until 01.12.2024, we can grant a 10% discount.

Traub TNK 36, Year of manufacture 2012, TX 8i S control, Absolute measuring system, Coolant device 7 bar, Breuning loading magazine 7m, Spindle insert tubes, Sub-spindle, Revolver 12-speed,

Traub TNX 65 - 42, Year of manufacture 2008, Control TX 8i - S, Bar machining up to 65 mm, 3 turrets 10 speed with Y axis, all turret stations driven, Sub-spindle, 2 x C axis 0.001°, Conveyor Cooling lubricant cleaning system, workpiece handling, without loading magazine, a lot of accessories,

- Ø over bed: 360 mm - Ø over carriage 160 mm - Max. spindle speed: 3,150 1/min - Revolver with 8 stations - Travel distance: X= 205, Z= 850 mm - Dimensions LxWxH: 3300 x 2100 x 1800 mm - Weight: 3,500 kg

CNC lathe TRAUB TNS 30 D With TX8D controller Year of construction: 1987 Spindle bore: 30 mm Circulation O over face slide: 200 mm X axis : 140 mm Z axis : 220 mm Speed range: Max. 8,000 rpm With the following accessories: Full protection cabin with interior lighting 2 x 12-speed turret VDI 30 ( 6 driven stations ) 14 driven tools VDI 30 8 tool holders VDI 30 1 pc additional control for training Coolant system 1 collet chuck hydraulic with foot switch Conveyor Operating instructions THE MACHINE IS IN TOP CONDITION THE MACHINE COMES FROM A VOCATIONAL SCHOOL

Equipment of the machine: - Powered tools, used - Filter system -Conveyor - Collets, used - Control TX8i Technical data: - Main and counter spindle - 1 turret with 12 stations, all powered - Clamping diameter: 36 mm - Spindle speed 6300 rpm - Tool holder front: 5 - Tool holder back: 5 - Feed Y1 axle: 20 mm - Feed X-axis: 50 mm - Feed Z-axis: 100 mm - X3 axis - Z4 axle

spindle passage: 60 mm weight of the machine ca.: 0,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 450 mm control: TX8D bore: 80 mm spindle speed:: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: max. 85 mm bar length: 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Traub System TX 8D centre height: 170 mm centre distance: 740 mm Dimensions (L/W/H): 3300 x 2000 x 1900 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.

Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible.

A Traub CNC sliding headstock automatic lathe is available. Turning diameter: 32mm, turning length: +/-100mm, travel Z: 250mm, tool positions: 2x12, shank diameter: 16mm/16mm, power: 2kW/5.5kW, speed: 6000rpm, main spindle speed: 8000rpm, power: 6.7kW/10.7kW, bar capacity: 32mm, counter spindle speed: 8000rpm, power: 6.7kW/10.7kW, bar capacity: 32mm, travel Z4: 250mm. Machine dimensions X/Y/Z: approx. 4450mm/1450mm/1700mm, weight: approx. 4200kg, control: Traub System TX 81, operating hours: 93424h. Documentation available. On-site inspection is possible.

Traub TNL 12 K lathe for sale year of construction 2005 Removal and loading on truck at buyer´s expense Delivery ex works excl. transport insurance Find more here - / Contact us at -

Manufacturer: TRAUB Model: TNC 42/65 Year of Manufacture: 2003 Voltage: 400V ~ Frequency: 50 Hz Additional Voltages: 24V Current Rating: 85A The machine includes a bar loader, chip conveyor and coolant unit. Find more here - / Contact us at -

This 7-axis TRAUB TNL 26 K was manufactured in 2006. A CNC sliding headstock automatic lathe, it features a max turning diameter of 32 mm, bar capacity of 32 mm, and dual spindle speeds up to 8,000 rpm. With 24 tool positions and a robust design, its ideal for precision machining. If you are looking to get high-quality turning capabilities consider the TRAUB TNL 26 K machine we have for sale. Contact us for more information.

This TRAUB TNS 60 was manufactured in 1990. A robust horizontal turning machine, its ideal for precision machining. If you are looking to get high quality turning capabilities consider the TRAUB TNS 60 machine we have for sale. Contact us for more information.

This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information.

Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

turning diameter:500 mm turning length:1000 mm weight of the machine ca.:7,3 t dimensions of the machine ca.:6,5 x 4,45 x 2,21 m