used WEEKE for sale

Weeke ABD 150 Automatic Drilling and Dowel Insertion Brand: Weeke Type: ABD150 Year of construction 2013 Machine Number: 0-253-05-5352 Description: CNC-controlled duel drilling and driving machine Workpiece Dimensions: X-Axis: Y-axis: Z-axis: Stroke in the middle: Field of work: Positioning: X-Axis: Y-axis: Z-axis: Stops: Support table with front and back stops 6 workpiece supports can be freely positioned over the entire X-length with scale Pneumatically operated center stop, manual control via pressure switch 5 Vertical pressure cylinde, manual positioning Vacuum clamping for sensitive surfaces 10 vacuum suction cups freely to position over total length (115140100 mm) 2 vacuum cups (12575100 mm) 1 vacuum suction cup for shablone Vacuum pump: 40m³/hour Aggregates: Horizontal drilling unit with 1 spindle Dowel station (32 mm distan ...

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer PC must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If you  ...

Continuous drilling machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drill rigs from below 2 x 2 Drilling Gears Side

Number of milling agregates: 1 St. Number of boring motors: 1 St. travel -y axis: 880 mm travel -z axis: 135 mm Dimensions (L/W/H): 3.735 x 2.700 x 1.800 mm travel -x axis: 2.310 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 4 St. spindle: 7,5 kW turning speeds: 24.000 U/min vacuum pump: Becker, VT 4.40, 40m³/h : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Homag, Type: 4-00570, Tool diameter mm: ca.160, Used: yes, HSK 63: yes, Angle saw: yes, FREE TEXT: Aggregat ohne Hauben mit Tastschuh/ 9000 U/min,

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 2, Grid: 32, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Weeke , Model: PKS-CPU, Serial number: 4-086-05-0230,

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Weeke, Type: BP 195 T, Year: 1996, Throuh running machine: yes, Working range X: 3200, Working range Y-axis: 1300, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, r.p.m: 18000, r.p.m: 18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Rollentisch: yes, Vacuum pumps m³/h: 120, Bohrer vertikal: 44, Auslegermaschine : yes, zwei getrennte Bohrgetriebe mit einzelnen Achsen Raster 32 mm, Year :1996

Manufacturer: Weeke Homag Sicherheitstrittmatten, Year: ca.1996, FREETEXT1: 7 Stück, FREETEXT2: 5 x 1000 X 1200, FREETEXT3: 2 X 600 X 1200, Year :ca.1996

Manufacturer: Homag-Weeke Fräsmotor mit C-Achse, Year: 1998, Type: SMZ DIS. E13676, Motor mit Getriebe: yes, aus Maschine: Weeke 195 T, Kw output: 7,5, Volt/Hz: 315-380/400-482, Motor mit Getriebe: yes, Speed rpm: 24000, Flange motor design: yes, Year :1998

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997

Manufacturer: Weeke, Type: BP 140 Optimat, Year: 1997, Control: Woodworp, Working range X: 3600, Working range Y-axis: 1200, Working range Z: 150, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 7,5, rpm 1): 24000, Number of tool changers: 12, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Vacuum pumps m³/h: 160, Tool clamping system: HSK 63, Saw unit: yes, CE-Sign: yes, Year :1997

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-050-DA01-01-FW, SN Nummer: DD-S 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-R-A02-02-FW, SN Nummer: DD03. 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-W030-RA01-02-FW, SN Nummer: DD-S 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-RA02-02-FW, SN Nummer: DDS03.1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03. 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS 303.1-W50-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-W030-RA02-02-FW, SN Nummer: DDS03-1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 269778-3369, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS02-1-W200-DA01-01-FW, SN Nummer: DDS2.1-W200-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778-33072, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2+ 1, Number of drilling spindles: 18/3, Grid: 25, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Weeke Einheit Bohrgetrtiebe mit 18 Spindeln, Stück Bohrgetriebe : 1, Number of drilling spindles: 18, Grid 32 mm: yes, Run on the machine: weeke 195 T, Price per unit Euro: 2500, Available: 4 Stück, FREE TEXT: 3360 U/min 50-60 Hz/1,5 kw,

This woodworking center was manufactured in 2003. A robust Weeke Profi BHC 600, it features a powerful 12 kW tool change spindle and an automatic tool change magazine with 18 places. It boasts extensive capabilities with a working length of 7250 mm and width of 1300 mm. Ideal for complex woodworking tasks, the machine includes a vertical drilling unit with 26 spindles and two horizontal drilling units. For more information about this woodworking machine, please reach out to us.

This 3-Axis Weeke Optimat BP145 horizontal machining center, manufactured in 2000, is equipped with Homatic IPC 2.4 and WoodWOP 4.0 software. It features a support table and extensive travel ranges: x-axis at 4950mm, y-axis at 1890mm, and z-axis at 400mm. Speeds reach up to 80 m/min on the x and y axes. Weighing 6600kg, it requires a concrete base of at least 300mm. Consider the Weeke Optimat BP145 machine we have for sale. Reach out for more information about this machining center.

This woodworking machine was manufactured in 2004. It features a robust CNC processing centre with a compact linear guide system and a ball screw spindle for precise X, Y, and Z axis movement. Equipped with a 9 kW milling spindle, adjustable from 1250-24000 RPM and a 360° positioning axis, it ensures versatile and efficient operations. The machine includes a 100 m³/h vacuum pump and an 18-fold tool holder. For more information about this woodworking machine, please reach out to us.

This 3-axis Weeke Optimat BHP Vantage 34M was manufactured in 2008. Ideal for precision CNC routing, this machine offers robust construction and reliable performance. If you are looking to get high-quality routing capabilities, consider the Weeke Optimat BHP Vantage 34M machine we have for sale. Contact us for more information.

This 4-axis Weeke Optimat BHC 550 CNC router was manufactured in 2002. Ideal for complex woodworking tasks, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the Weeke Optimat BHC 550 machine we have for sale. Contact us for more information about this machine.

Process: horizontal drilling - injecting glue - driving dowels 1 drilling and doweling unit, freely programmable Workpiece dimensions: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/ max: 10 / 60 mm Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical pushers Double diaphragm pump 1:1 Dowels: 8 mm x 30 mm, 8 mm x 35 mm Control: Powercontrol PC85T with Woodwop software