used WEILER for sale

Weiler Condor 81 - Universal lathe - K+C 3-axis position indicator - Bison 3204-160 3-jaw lathe chuck - Collet chuck + various collets - Feed protection - Multifix - Coolant device - Swarf back wall - Full service carried out (oil change, belt change, etc.) - Year of construction 1984 Specifications - Circumferential Ø over bed: 330 mm - Circulating Ø over face slide: 185 mm - Turning length between tips: 750 mm - Turning length between tips with covered guide and pull spindle: 650 mm - Tip height: 165 mm - Bed width: 240 mm Fulcrum shaft: - Spindle head DIN 55027: size 5 - or similar to DIN 55029 (Camlock D1): size 4 - Spindle Ø in the front bearing: 70 mm - Spindle passage: 40 mm - Inner cone according to DIN 228: MK5 - Centering tip according to DIN 806: MK3 - Face plate Ø max.: 280 mm - Chuck Ø normal: 160 mm - Chuck Ø maximum: 200 mm Tool slides: ...

Weiler DA 260 L & Z Lathe For technical data, see additional sheet.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

WEILER LZ 330 from educational institution -Turning diameter over bed 330 -Turning diameter over support 165mm -Turning length 800mm -Speed range / Infinitely variable 25-2800 1/min -Automatic longitudinal/plane feeds -Drive power approx. 3Kw -Multifix with inserts - 2x three-jaw chuck - 1x four-jaw chuck - 1x Face Plate - Collet setup with collets - Miscellaneous accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg Bsc929Gqgbi

For sale are: 3 pieces of used precision lathes Manufacturer: Weiler Werkzeugmaschinen GmbH Type: DZ65 (Pictures 1 - 12), DZ65/H1 (Picture 13 - 20), DZ65/H1 (Picture 21 - 28) Year of construction: 2011, 2009, 2009 Operating hours: 17,324, 31,298, 31,720 Control: Siemens Sinumerik 840D Turret capacity approx.: 12 pieces Turning diameter, max.: 560mm Spindle speed: 5000 1/min Travel: X-axis: 207 mm Z-axis: 530 mm Lining: RÖHM, d200 mm Conveyor Handwheel Documentation The DZ65 BJ 2011 has powered WKZ. Scope of equipment see pictures machine card at the end of each series of pictures... Machines are in a very neat condition and can be viewed in our warehouse. Price is for one machine.

I hereby sell a hamlet Primus, which is in very good condition. In recent years, it has been used only rarely, rarely and exclusively for plastic machining. The machine is equipped with a digital measuring system on 3 axes and is fully functional. No VAT is shown at the time of purchase.

Lead and Pull Spindle Lathe WEILER Condor - Original paint - Turning diameter over bed 330 mm - Turning diameter over support 170 mm - Turning length 800 mm - Tip height 160 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal/face feeds - Tailstock MK3 - Emergency/Off - Total power requirement 3 KW - Three-cheek butter -Documentation - Multifix with insert - Electric lining protection - Work light - Swarf back wall Dimensions: LxWxH 1.9x0.9x1.5 meters / Weight 850Kg

Specifications: Manufacturer: Weiler Type: Commodor 40 AC Year of Make: 1995 Workspace Turning length: 700/950 mm Max. centre width: 750/1,000 mm Tip height: 180 mm Spindle Spindle speed: 13 – 2,000 rpm Spindle bore: 56 mm Max. circulation over bed: 380 mm Max. rotary diameter over face slide: 190 mm Tailstock Quill Cone: MK4 Quill adjustment: 150 mm Dimensions and weight Area requirement: 2,100/2,350 x 1,000 x 1,400 mm Weight: 1,550 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool holders Multifix B incl. holder Collet device incl. accessories and complete machine documentation

Weiler Primus Type-MD-G -Tip height 125mm -Tip width 400mm -Speed range 80-4000 rpm -Spindle passage 24mm -Electric lining protection -Tailstock with drill quill -Work light -Four-jaw chuck -Multifix with inserts -Bed stop Dimensions: LxWxH 1.3x0.8x1.5 meters / Weight 400Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Collets - quick clamping device incl. collets -Lining protection -Swarf back wall with work light -Emergency - Off -Interchangeable wheels -Running tip -Chuck -Rod passage 36mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg Gpdpzg

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of Make: 2012 Spindle bore: 66 mm Center width: 1000 mm Circulation Ø over bed : 435 mm Circulation Ø over face slide: 200 mm Tip height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed SAUTER turret with AGW and tool drive C axis via main drive 3 pcs driven tools VDI 30 3 jaw chuck FORKARDT 0 250 mm 1 pc. fixed lynette 0 120 mm Tailstock with extendable drill quill Coolant device Coolant spray gun Chip drip tray 5 Pcs Height-Adjustable Machine Shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION THE MACHINE WAS ONLY USED FOR TRAINING THE MACHINE HAS ONLY 9044 POWER-ON HOURS

Control Siemens Sinumerik 820T Spindle Passage 42 mm Turning diameter 200 mm Spindle speed main spindle 8000 min-1 Spindle speed sub-spindle 6000 min-1 16-fold revolver with applied revolver. Competition. Bar loading magazine IRCO DS 42.10

WEILER LZ330 Lathe -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts Hobkn Aujvwctps S Tjl -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of Make: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation Ø over bed : 435 mm Circulation Ø over face slide: 200 mm Tip height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed SAUTER revolver 3 jaw chuck RÖHM 0 200 mm Tailstock with extendable drill quill Coolant device Coolant spray gun Chip drip tray 5 Pcs Height-Adjustable Machine Shoes Operating instructions

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 kg, can be viewed under power

Machine is in top condition and incl. accessories ( 20 Multifix holders, 70 collets, glory chuck) , 1 - 4500 rpm, 1300 kg, can be viewed under power

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of Make: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation Ø over bed : 435 mm Circulation Ø over face slide: 200 mm Tip height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix tool holder with 8 inserts 8-speed SAUTER turret with AGW and tool drive C axis via main drive 3 Jaw chuck Schunk ROTA plus 0 250 mm 5 set of soft top jaws, 1 set of hard top jaws Tailstock with extendable drill quill Coolant unit reinforced 5.5 bar Coolant spray gun Chip drip tray 5 Pcs Height-Adjustable Machine Shoes Operating instructions

CYCLE LATHE WEILER E 35 With 2 axes Siemens Sinumerik 805 Year of Make: 1995 Spindle bore: 54 mm Center width: 950 mm Circumference Ø over bed : 410 mm Speed range: 4 – 3000 rpm With the following accessories: PARAT tool holder with 8 inserts Feed protection 3 jaw chuck 0 200 mm 4 jaw chuck 0 200 mm Fixed Lynette 12 - 150 mm Chip drip tray Chip backsplash wall with lighting Coolant Setup 4 Height Adjustable Machine Shoes Operating instructions

Lead and pull spindle lathe WEILER PRAKTIKANT VC With 3 axis digital display SIEMENS Year of Make: 2001 Spindle bore: 40 mm Center width: 750 mm Circumference Ø over bed : 320 mm Speed range: 30 – 4000 rpm With the following accessories: Multifix Tool Holder Feed protection Chip backsplash wall with machine light Chip drip tray Coolant Setup 3 Jaw chuck SCHUNK Rota S plus 0 160 mm 4 Height Adjustable Machine Shoes Tailstock with quill Operating instructions

approx. 33600 switch-on hours swing over bed 570 mm, over support 340 mm Center width 2000 mm Speed range (1/min) Level 1: 1-625, Level 2: 4-2500 Spindle bore 83 mm Tailstock quill D 80 mm, mount MK 5 Main drive 20/17 kW, connected load 30 kW Incl. Control Siemens Tool turret 8-speed Sauter Chip conveyor with coolant device Mayfran Movable chip protection cover 3-jaw chuck Schunk Rota S 250 Manuals

Weiler Primus VC, Year of manufacture 2000, Digital Center width 500 mm, max. turning diameter over carriage 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix steel holder, 24 longitudinal feeds, metr. Thread inch thread,

Siemens 3 T 6 + Siemens Simodrive

WEILER Matador, lead and pull spindle lathe, lathe Turning diameter over bed: 295 mm Turning diameter over support: 155 mm Turning length: 500 mm Tip height: 140 mm Bed width: 205 mm Spindle diameter in the front bearing: 60 mm Spindle bore: 36 mm Quill stroke: 85 mm Quill diameter: 40 mm Inner cone: MK 5 Centering tip: MK 3 Speed range: 15-3550 rpm Total power requirement: 3 kW Space requirement: approx. 1,500 x 500 x 1,500 mm Machine weight: approx. 750 KG Multifix base holder and insert Feed protection Work light

Leit & Tension Spindle Lathe / WEILER COMMODOR 180 GSD (Demonstration Machine) -Tip width 1000mm -Tip height 180mm -Rod passage 56mm -Circulation. over bed 380mm -Circulation. via flat slide 215mm -Speed range / gear machine 25-2000rpm -Automatic longitudinal/flat feeds - Thread /Metric /Inch / Diametrically -Quill cone MK4 -Quill stroke 150mm Begf9Au -3 - Axis digital display -Coolant device -Multifix with inserts -Three-jaw chuck - 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.4x1.7Meter /Weight: 1900Kg

WEILER COMMODOR 230 / Heidenhain Digital Display / GS Identifier -Tip height 230mm -Tip width 1000mm -Spindle bore 56mm -Turning diameter over bed 475mm -Circumferential diameter via face slide 270mm -Speed range 25-2000 rpm -Automatic longitudinal/flat feeds - Thread / Metric / Inch -Tailstock MK 4 -Three-jaw chuck 200mm -Quick-change holder with insert -Coolant device Marzflskk -Lining protection -Swarf back wall -Work light -2xNOT/OFF -Machine feet -Documentation Dimensions: LxWxH 2.5x1.5x1.7 meters Weight:1800Kg

Weiler Condor / Best condition / Digital display Chuck / Collet / Multifix all new

Lathe Lead and pull spindle lathe Type: Matador VS2 Manufacturer: Weiler Year of construction: approx. 1980 Condition: The machine is used and has been completely cleaned. Short video is also available. Machine dimensions: LxWxH: approx. 2000 x 500 x1500 mm Weight approx. 800kg We load the machine onto the buyer's truck. By prior arrangement, shipping within Germany is also possible through us. In this case, the shipping costs would be added to the purchase price accordingly. This offer is aimed at tradespeople. An invoice with VAT will be issued.

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Machine type: Lathe - cycle-controlled Manufacturer: WEILER Type E30 Year of manufacture 1991 Weiler control Country of origin Germany Additional information Cycle-controlled lathe HAMLET - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Circumferential diameter over bed 330 mm Circulation diameter max. via face slide 160 mm Slide travel 180 mm Bed slide longitudinal travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 rpm/-1 Drive power - main spindle 9 / 11 kW Max. torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in the vord. Bearing 70 mm Spindle bore 40 mm Usable rod diameter ( - ) mm Tool carrier: Type MultiFix Turning chisel shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock mount MK 3 Feeds: Rapid traverse max. 10 m/min Fee ...

Universal lathe of the Weiler brand suitable for tooling, fixture construction, training and mould making Tip Height : 280mm Speed :48-2500 rpm Tip height : 280 mm Circumferential diameter over bed : 570 mm Circulation diameter over face slide : 340 mm Center width : 1,000 mm Rhqel FULCRUM SHAFT Spindle head DIN 55027/DIN ISO 702-3 : Gr. 8 Spindle bore : 83 mm Spindle diameter in front bearing : 120 mm MAIN DRIVE Drive power 60 %/100 % ED : 15/12 kW Speed range : 1 – 2,500 rpm Number of speeds : infinitely variable FEED RANGE Number : infinitely variable Longitudinal : 0.001 – 10 mm/rev Plan : 0.001 – 10 mm/rev Longitudinal feed force : 10,000 N Feed force plan : 7.000 N Max. longitudinal rapid traverse speed : 6/3 m/min THREADING AREA Metric threads : 0.1 – 400 mm Inch thread : 56 – 1/4 TAILSTOCK Quill ...

WEILER Lathe Condor - Width: 180 cm - Depth: 70 cm - Height: 140 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 800 mm total power requirement: 2 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,811,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Weiler W2 hollow: 280 mm centre height: 440 mm bed width: 320 mm weight of the machine ca.: 200 kg : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 2880 U/min engine: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: ca. 750 mm turning diameter over bed: 380 mm turning diameter over slide: 150 mm control: Sinumerik System 3 Operating hours: 296 hours The lathe is as good as new and is fully functional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 165mm, center width: 800mm, turning diameter over bed/face slide: 330mm/185mm, spindle bore: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1700mm, weight: approx. 900kg. On-site inspection is possible.

A barely used Weiler precision lead and feed spindle lathe is available. Turning diameter over bed/slide: 250mm/180mm, turning length: 450mm, spindle clearance: 23mm-24mm, speed: 3000rpm, drive power: 1.5kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 600kg. Including accessories. On-site inspection is possible.

This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine.

This horizontal turning machine was manufactured in 2005. A Weiler C 30x750, it features a swing diameter over bed of 330mm and a spindle bore of 41mm. The main drive offers a power of 7/9 kW and a torque of 90Nm, with a speed range up to 4500 rpm. If you are looking to get high quality turning capabilities consider the Weiler C 30x750 machine we have for sale. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Contact us for more information.

This horizontal turning machine was manufactured in 2009. A Weiler E 60x1000, it features a spindle bore of 83mm and a swing diameter over bed of 640mm. With a maximum torque of 1400Nm and a speed range up to 2500 rpm, its ideal for robust turning operations. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Consider the opportunity to buy this Weiler E 60x1000 horizontal turning machine. Contact us for more information about this machine.

turning diameter:160 mm turning length:500 mm weight of the machine ca.:4 t This machine comes from a training workshop. Technically, the machine is fully functional and in a well-maintained condition.

L + Z Lathe WEILER Type Intern 800RMash. No. 2997 Year of construction 1982Center width 800 mmTurning diameter over bed 280 mmTurning diameter over support 160 mmCenter height over bed 140 mmCenter height over support 80 mmSpindle bore 36 mmFeed longitudinal and flatChuck intake short taper DIN 55027 Gr. 5 4x M10Tailstock inner taper MK 3Quill adjustment 90 mmSpindle speed 42 - 2000 rpm. Drive power 0.8 / 1.6 kWNerg connection 380 Volt, 50 Hz- 3-axis digital display SINO, type

L + Z lathe WEILER type LZ PRIMUS GSMasch. No. 2461 Year of construction approx. 1990Center width 400 mmTurning diameter over bed 250 mmCenter height over bed 125 mmTurning diameter over support 140 mmCenter height over support 70 mmSpindle bore 24 mmSpindle speed 60 - 3000 rpm. 18 stepsFeed longitudinal and flatChuck flange Short taper DIN 55022 Gr. 4Tailstock inner taper MK 2Drive power 1.1 kW and 1.5 kW pole-switchableMains connection 380 volts, 50 Hz- 3-axis digital display FAGOR, type

L + Z Lathe WEILER Type Condor 81 AMash. No. 36553 Year of construction approx. 1985Tip width 750 mmTurning diameter over bed 330 mmTip height over bed 165 mmTurning diameter over support 180 mmTip height over support 90 mmSpindle bore 40 mmChuck intake short taper DIN 55027 Gr. 5Tailstock inner taper MK 3Pine adjustment 110 mm Spindle speed 45 - 2800 rpm 16 stepsDrive power 3 kWNet connection 400 volts, 50 Hz spindle speed over 16 gear stages - 3-jaws